0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

Système anti-collision WORX Landroid

Brand:WORX

2.9/5

€
448.37

Le système anti-collision Landroid, ou ACS, est comme une paire de lunettes pour votre Landroid. Désormais, il pourra repérer les obstacles et les caractéristiques de la pelouse jusqu'à 8 pouces de distance et 5 pouces de haut, et diriger pour les éviter, au lieu de les heurter. Cela signifie qu'il tondra plus rapidement et fera un travail plus efficace pour tondre votre pelouse. Voyez, sans ACS, chaque fois que Landroid tombe sur quelque chose qui peut le faire tomber de son jeu, il doit recalculer où il se trouve dans votre cour. C'est ainsi que fonctionnent la plupart des tondeuses à gazon robotisées. Mais lorsque vous sautez sur l'ACS, Landroid peut esquiver les buissons et les jouets pour enfants et garder le cap pour garder votre jardin propre et bien rangé. Il utilise une technologie anti-collision de qualité automobile pour y parvenir. Vous savez, le même genre de capteurs qui vous avertissent lorsqu'une autre voiture se trouve dans votre angle mort. Cela empêche Landroid d'érafler sa peinture, mais plus important encore, cela minimise également les dommages aux structures autour de votre jardin. Tout le monde y gagne lorsque Landroid utilise le système anti-collision. Les robots tondeuses sont des appareils haut de gamme. Donnez au vôtre tous les outils dont il a besoin pour fonctionner aussi bien que possible, afin que vous puissiez passer votre week-end à vous détendre avec la confiance que Landroid rendra la pelouse belle, tout seul.

Montant
Ajouter au panierAcheter maintenant

EAN: 0845534019162

Catégories Patio, Lawn & Garden, Outils électriques extérieurs, Pièces de rechange et accessoires, Pièces détachées et accessoires pour tondeuses à gazon, Pièces de rechange pour tondeuses à gazon,

[FAIS LE TOI-MÊME. FAIS LE MIEUX. FAITES-LE AVEC WORX.] Les outils WORX sont conçus avec une technologie de pointe et au-dessus des normes d'efficacité modernes, de sorte que vous pouvez créer une collection d'outils rentable qui a été conçue pour durer. [FACILE À INSTALLER] Retirez le module sur le dessus, faites glisser ACS, verrouillez-le avec deux vis et la clé hexagonale (incluse), et vous êtes bon. [Fonctionne plus intelligemment] Sans ACS, Landroid heurtera des objets et se retournera pour naviguer dans votre jardin, mais cela interfère avec son algorithme de tonte. Avec ACS, vous tondez mieux et plus vite. [ÉVITE LES DOMMAGES] À la fois au Landroid et aux arbres, à l'aménagement paysager, aux meubles de jardin et à d'autres points de repère autour de votre pelouse. [DÉTECTION À ULTRASONS] Permet au Landroid de reconnaître les obstacles avant de les heurter.
Country of Origin China
Customer Reviews 3.8 3.8 out of 5 stars 166 ratings 3.8 out of 5 stars
Item model number WA0860
Item Weight 8.8 ounces
Manufacturer Worx
Product Dimensions 8.66 x 2.36 x 1.97 inches

2.9

10 Review
5 Star
48
4 Star
17
3 Star
14
2 Star
11
1 Star
10

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Freesia Perricone
Not sure what value it's adding
I ended up disabling mine, and wish I hadn't bought it. The only thing it seemed to avoid is, if there was a cluster of dandelions or something that grew much higher than the grass around them, the robot would avoid them when I wanted it to do the opposite. I don't have any obstacles to be avoided in my yard, though, other than a baby lilac that I put wire fencing around anyway. But even when this was enabled and I tested it by standing in the way of the mower, it still bumped into my leg.
Scritto da: M. Downey
60% of the time it works everytime!
The media could not be loaded. It's godsend when it works but usually I have anxiety, constantly peeking out the window while my landroid mows to make sure it's not getting into any shenanigans. I bought the ACS unit because we like to have a volleyball net up during the summer. I put pool noodles over the anchor ropes of the volleyball net so the ACS unit could better detect them. I also check and clean the ACS unit to ensure there's no debris. But in the end there's no consistency to what it chooses to see or not see. Edit (Month Later): I moved the volleyball poles away from the border wire a few feet so the landroid could easily get between the border and poles when cutting. Since then I've only had one instance where it ran into a pole.
Scritto da: Needlesharp
Easy to Install and Works as Advertised
The Worx robotic mower, Landroid, is supported by occasionally updated Firmware (software). Currently (as of June 2020) it is not possible to turn the ACS system on & off by smartphone app. Once installed, ACS remains 'on' constantly during unit operation. This 'on/off' option has been promised by Worx to be included in the next Firmware update. I would very much like this option as I've built a 'garage' around my Landroid's charging station and I'd like to have slit rubber mats acting as 'doors' at the entrance and exit of this station. But currently can't do this with the ACS active as it would see these mats as obstructions. I'd like to have ACS come 'on' say after a 5-sec delay when Landroid starts. That way it could leave garage passing through the slotted exit mat. When coming 'home' for a battery re-charge, I'd also like to have the ACS turned off, so it can enter charging station through the entrance mat.
Scritto da: Lee Nelson
This add-on feature works fine.
This installable module works great and stopping the Landroid from bumping into objects. It works as described. But given the fact that Worx is not supporting their products I plan on returning the lawnmower and all added features to Amazon for a refund and looking closely at other manufacturers of Robotic Lawnmowers. I decided to keep the mower and learn to support it myself. . After one year of using the Lanlord as a back yard mower I have changed my opinion on it. While it is difficult to setup. Once the initial laying of guide wires is complete and the inevitable changes to the initial design this Robotic Lawnmower works great. It keep my 1/2 acre lawn cut perfectly. It does require some periodic maintenance like replacing the blades but otherwise I am very happy with the mower. The fact that it will only run on a 2.4 GH Wi-Fi channel is something I wish Worx would change because 2.4 GH has a lot of traffic on it. I have to add a router end point in my attic for the Worx Lanlord to be able to stay connected to Wi-Fi. Otherwise all is good.
Scritto da: Michael
Better but needs improvement
Still bumps into objects at or higher than 5". It's an improvement, but far from 100% in terms of being able to see objects in front of it. I'm a little disappointed in that I expected it to be better but I'm still OK with the purchase as the unit performs better with it than without it
Scritto da: Joe storm
ABSOLUTE MUST HAVE
Although not required to run this mower, you will want the ACS hardware to mow more efficiently around obstacles. One instance is a 25x25 shed that is just tall enough for the mower to get stuck half way. Another instance is running over items and getting stuck.... THIS ACS HARDWARE RESOLVED ALL MY HEADACHES. The mower mows so more more smoothly as it maneuvers through the yard. I had a robomow rs622 model for almost 5 years. I am very happy about this unit. Also purchased the HOOD/House for the base charger to protect from the hot sun. THANK YOU WORX!
Scritto da: Gus Mix
Good but...
It recognizes trees, but stop crashes into stones and everything what's not huge. Could be optimized.
Scritto da: robert
interesting
it can see a car , but not the tires , it can see a small tree , but tries to run over a shrub , it certainly uses the bump guard on the fence and decorative stone edging , and the tire is what it needs to fear ...lol
Scritto da: Terry
Stops running into the trees
I bought this after seeing mixed reviews about it. It now steers the bot within mm of trees and avoids them. It is driving around my trampoline. Before adding this it was hitting everything. This does not give it depth perception as it still will go over my curb. I'm hoping that it saves the sensors and the bot lasts longer as it is not constantly hitting things. It is an expensive add on and may make the bot safer, but it already is safe as it stops the blades as soon as it is lifted and it is fully enclosed. I would buy it again as it may steer around something someone left in the yard and the bot may last longer. The install is very easy and will take you 5 minutes. All of the tools and screws are included.
Scritto da: marc andre lapierre
Basically useless
If there's a patch of high grass, the mower will simply go around when the radar is installed! Over a 3 weeks period, the situation just got worse to the point I had to deactivate it completely. It has also troubles avoiding objects that are less than 5 inches high, so makes this device useless basically.

Produits connexes

hot
Stens Nouvelle extrémité de biellette de direction 245-076 5/16-24
4.1/5

€ 48.80

Stens Nouvelle extrémité de biellette de direction 245-076 5/16-24
4.1/5

€ 48.80

hot
Courroie trapézoïdale D&D PowerDrive BP91
0.1/5

€ 38.75

Courroie trapézoïdale D&D PowerDrive BP91
0.1/5

€ 38.75

hot
Briggs & Stratton 799045 Démarreur Remplace 795092/695550/691376
3/5

€ 169.59

Briggs & Stratton 799045 Démarreur Remplace 795092/695550/691376
3/5

€ 169.59

hot
Stens nouveau carburateur OEM 615-382 pour Zama RB-K70A
4/5

€ 114.25

Stens nouveau carburateur OEM 615-382 pour Zama RB-K70A
4/5

€ 114.25

hot
Oregon 96-401 Gator G3 Lame de rechange pour tondeuse à gazon 23-1/4 Noir
3.5/5

€ 44.66

Oregon 96-401 Gator G3 Lame de rechange pour tondeuse à gazon 23-1/4 Noir
3.5/5

€ 44.66

hot
Briggs & Stratton 696146 Kit de révision de carburateur
3.5/5

€ 71.95

Briggs & Stratton 696146 Kit de révision de carburateur
3.5/5

€ 71.95

hot
Stens 258-116 Courroie compatible avec/remplacement pour Dayco L5116, Gates 69116, Goodyear 851160, Ref No B113 116 Longueur, 5/8 de largeur, haute résistance aux coupures, cordon intérieur en aramide pour tondeuses à gazon résistantes
3.5/5

€ 88.40

Stens 258-116 Courroie compatible avec/remplacement pour Dayco L5116, Gates 69116, Goodyear 851160, Ref No B113 116 Longueur, 5/8 de largeur, haute résistance aux coupures, cordon intérieur en aramide pour tondeuses à gazon résistantes
3.5/5

€ 88.40

hot
Nouveau filtre à air Stens Combo 100-256 compatible avec/remplacement pour tracteurs de pelouse John Deere LX178 et LX188, Kawasaki FD501V-CS00 11013-2134, 11013-2146, 11013-2206, 11029-2006, 11029-2018, M115978
3.8/5

€ 43.54

Nouveau filtre à air Stens Combo 100-256 compatible avec/remplacement pour tracteurs de pelouse John Deere LX178 et LX188, Kawasaki FD501V-CS00 11013-2134, 11013-2146, 11013-2206, 11029-2006, 11029-2018, M115978
3.8/5

€ 43.54

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu