Tekonsha 118554 Connecteur T-One avec module ModuLite HD protégé par circuit amélioré

Brand:Tekonsha

3.6/5

114.14

Tekonsha 'T-One', les connecteurs de harnais de remorquage spécifiques au véhicule ne nécessitent aucune épissure des fils du véhicule. Localisez simplement le connecteur du faisceau de câbles de votre véhicule, débranchez la connexion et insérez le connecteur T-One dans le faisceau du véhicule. Aucun outil spécial requis. Pour réduire la pression sur le système électrique existant de votre véhicule, ce kit comprend un module HD ModuLite alimenté qui s'alimente directement de la batterie pour alimenter le système d'éclairage de la remorque. Selon le véhicule, le module reçoit son alimentation d'un seul fil simple à ajouter qui se connecte à la borne positive de la batterie ou tire son alimentation du port de câblage de la remorque du véhicule. Le module ModuLite garantit également que le système électrique du véhicule de remorquage est compatible avec le câblage de la remorque, tout en protégeant le système électrique du véhicule de remorquage contre les courts-circuits nocifs et les situations de surcharge. Le connecteur plat à 4 fils inclus est compatible avec les adaptateurs à 5, 6 et 7 pôles (non inclus) pour s'adapter à presque tous les systèmes de remorque. Depuis ses humbles origines en tant que fabricant d'escaliers et de marches pour VR en 1964, Tekonsha a évolué pour devenir un nom de confiance en matière de sécurité de remorquage. La gamme de produits de base se compose de contrôleurs de frein, de câblage électrique et de freins de remorque. La ligne Tekonsha fait depuis longtemps confiance aux tours professionnelles et aux guerriers du week-end pour un voyage sans souci.

Instructions de bricolage simples et faciles à suivre incluses dans chaque emballage ; aucun outil spécial requis pour l'installation. Fil collé de calibre 16 avec fiche à 4 plats et capuchon ; Capacité du circuit de feux stop/clignotants de 4,2 A ; Capacité du circuit de feu arrière de 7,5 A ; module ModuLite HD protégé par circuit amélioré. Construction monobloc résistante aux intempéries et aspect « usine » - Les connecteurs T-One ressemblent à une partie du harnais d'usine et se rangent simplement dans la zone de chargement ou sous le pare-chocs arrière lorsqu'ils ne sont pas utilisés. Les connecteurs de faisceau de remorquage T-One ne nécessitent aucune épissure des fils du véhicule, il suffit de localiser le connecteur du faisceau de câbles de votre véhicule, de débrancher la connexion et d'insérer le connecteur T-One dans le faisceau du véhicule.
Brand Tekonsha
Brand ‎Tekonsha
Customer Reviews 4.6 4.6 out of 5 stars 164 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 5.5 x 3.75 x 9 inches
Item model number ‎118554
Item Weight 1 Pounds
Item Weight ‎1 pounds
Manufacturer ‎Tekonsha
Manufacturer Part Number ‎118554
Material Copper
OEM Part Number ‎118554
Product Dimensions ‎5.5 x 3.75 x 9 inches

3.6

8 Review
5 Star
80
4 Star
11
3 Star
3
2 Star
3
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Halthor
Works great
Installed on a 2008 Jeep Liberty, very easy to install. Except the wire that needed to be run from the rear bumper to the battery. It has to be threaded through part of the frame and zip tied to some of the other stuff underneath the vehicle, this was the most time consuming. The wires connected to the taillights we’re easily installed which took about fifteen minutes and that included removing the taillights.
Scritto da: Kshopper
Fits inside the left rear taillight housing.
Lots of fusing around to get it into the tail light housing. I guess the wiring could be longer and better thought out. It does work well. If your not patient, I suggest you have an installer.
Scritto da: crazylare
Easy trailer lights
The trailer light kit was fairly simple to install. The hardest part is running the power wire from the back to the front. Not easy to do on Jeep Liberty's. Other than the power wire the rest was really easy. I hope that it lasts a good long time.
Scritto da: Kev in Montrose
Everything fits and functions as it should.
The included instructions were good about everything that I had to do at the rear of my vehicle. Rather vague about how to get the power wire from the left rear corner to the battery at the left front corner. This was the only difficult part of the installation as it requires you to lift the vehicle high enough to crawl under it from the front to the back.
Scritto da: Matt
Easy To Install
I installed this on my 2008 Jeep Liberty. It took me about 45mins. My only recommendations are to watch a youtube how-to video, and acquire a rather large pair of wire crimpers or channel locks. The wire connections included are rather heavy duty and I struggled to seat them properly with regular sized pliers. I ran the black power cable from the battery through the driver side undercarriage frame and back to the control unit. The package included plenty of zip ties for the job.
Scritto da: GFleck
Much better then the curt it replaced
went through two curt models and they each lasted about a year, hopefully this one will last longer. installation was simple and worked the first time, will update after a few months of service
Scritto da: Grendel
Works fine.
Works great and includes everything you need to install.
Scritto da: R. Hageman
Piece of cake!
I own a 2010 Jeep Liberty and had this installed in under 30 minutes with minimal effort. The hardest thing is running the power wire from the battery to the back because you have to hide it and secure it. Otherwise this is great. It's plug and play. There is a YouTube video that shows how to get the back of the Liberty apart for the install of a wiring harness. It's not this particular one but it's the same concept and will help tons if you view it before you start. It's dead on accurate and shows you exactly what to do.

Produits connexes

hot
Reese Towpower 74658 Connecteur en T
3.7/5

€ 107.08

Reese Towpower 74658 Connecteur en T
3.7/5

€ 107.08

hot
POLLAK 11-410 Prise 4 voies chromée
3/5

€ 25.94

POLLAK 11-410 Prise 4 voies chromée
3/5

€ 25.94

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array