The Hillman Group 2511 Lot de 13 écrous en T 1/4-20 x 5/16 x 3/4"

Brand:‎Hillman

3.3/5

€
25.76

DESCRIPTION DU PRODUIT Un assortiment de variantes de broches, de trous de brad et d'écrous en T rectangulaires de The Hillman Group. Les écrous en T offrent un moyen facile de placer des fils d'acier dans le bois et offrent la plus grande résistance à l'arrachement de tous les types d'inserts filetés. Les variantes incluses dans cet assortiment vont de #6-32 à 3/8-16 en tailles de filetage fin et grossier et de 9/16 à 1 en hauteur. L'assortiment complet contient quatorze (14) recharges composées des numéros d'articles Hillman #2501 - #2514. DU FABRICANT Les écrous en T Brad Hole insèrent des filets d'acier sur le bois. Ils contiennent des trous de brad et doivent être fixés à l'aide de petits clous de brad. Les écrous en T sont conçus pour laisser une surface affleurante dans le bois dur et tendre. Les écrous offrent une base plate avec des projections de dents parallèles au canon.

Montant

Ajouter au panier Acheter maintenant

EAN: 0008236020175

Catégories Industriel et scientifique, Nœuds, Vis et attaches, Ecrous en T,

Finition zinguée. Résistant à la corrosion. Filetages 1/4-20. À utiliser dans le bois dur et mou pour laisser une surface affleurante. Finition zinc pour une meilleure résistance à la corrosion. Ces écrous en T à trou de brad sont dotés d'un filetage grossier 1/4-20 et mesurent 5/16 de large x 3/4 de haut. 13 pièces par emballage de vente au détail. Les variantes incluses vont de 9/16 à 1 en hauteur. Les variantes incluses vont de #6-32 à 3/8-16 dans les tailles de filetage fin et grossier. L'assortiment complet comprend des types d'écrous en T à griffes, à trou de brad et rectangulaires pour répondre à la plupart des applications requises. Utiliser dans du bois dur et/ou tendre pour garder une surface plane.

Accessory Connection Type	‎Flange
Assembled Diameter	‎0.31 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	‎Hillman
Certification	‎An
Color	Zinc
Color	‎Zinc
Country of Origin	‎China
Customer Reviews	4.2 4.2 out of 5 stars 112 ratings 4.2 out of 5 stars
Cutting Diameter	‎0.31 Inches
Domestic Shipping	Item can be shipped within U.S.
Exterior Finish	Zinc
Exterior Finish	‎Zinc
Fastener Type	Screw Mount
Fastener Type	‎Screw Mount
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	‎2.5 x 1.2 x 1.5 inches
Item model number	‎2511
Item Package Quantity	‎1
Item Weight	‎0.22 Pounds
Item Weight	‎3.52 ounces
Manufacturer	‎The Hillman Group
Material	Steel
Material	‎Steel
Measurement System	‎Inch
Metal Type	‎Zinc
Part Number	‎2511
Product Dimensions	‎2.5 x 1.2 x 1.5 inches
Size	‎1/4"-20 x 5/16" x 3/4"
Special Features	‎Assortment
Thread Coverage	‎Fully Threaded
Thread Size	1/4"-20
Thread Size	‎1/4"-20
Thread Style	‎Right Hand
Usage	‎Wood

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Amazon Customer

Thank you so much!

Thanks to who ever corrected my order. I did a lot of reasearch and measuring to learn that these T-Nuts were the answer to getting my project just right. Amazon delivered my order to someone elses house and, I needed these T-Nuts really bad. All is forgiven because these nuts are perfect. The other choice I was looking at before I found these nuts were going to cost me $7.85 each and, I needed 24 of them. I almost paid $188.40, plus Taxes and shipping for those nuts and that would have made me a real NUT.

Scritto da: T. Macy

Item received does not match picture.

These are just standard Zinc Tee Nuts that are available at almost any hardware store, and not the Oiled Brass item in the picture.

Scritto da: Tin Nguyen

Can mount anywhere . Too small

Very light duty. I think I can’t handle anything more than 2 pounds

Scritto da: Vintner Don

They are tiny, but are as designed.

These did not fit the application where I wanted to use them. Not that the parts are bad. They are fine as designed, but I had misunderstood the dimensions and thought it was larger base. I would be concerned about the small surface and just brad holes to secure this in place. The legs should be short and not be dragged or this could break out of the mounting.

Scritto da: Wilber

Great for casters on a trundle bed.

I used nine of these for mounting casters on the trundle bed I built. I was a little surprised at how small they were, because the image makes them look so much bigger, the brad holes especially. But they mounted fine and the casters screwed into them fine and they seem to be holding up fine. So I have no problem with them at all. I ended up using screw nails for mounting them to the frame. Hopefully they never come out. I feel pretty confident they'll last at least as long as the bed will.

Scritto da: Lars F

Does what its supposed to do...

Amazing what you can use to get a job done. I used this to restore a rear automotive wing from the 80's

Scritto da: Dave

Four Stars

Prompt delivery and well made.

Scritto da: Frankie

A little confusing

The third number is the screw diameter. I bought the wrong ones. I intend to rebuy the right size. They seem like good quality fasteners