The Hillman Group 3272 Lot de 20 vis à tête creuse en acier inoxydable 6-32 x 1/8"

Brand:‎Hillman

3.1/5

€
26.86

DESCRIPTION DU PRODUIT Une vis de réglage est un type de vis généralement utilisée pour fixer un objet à l'intérieur ou contre un autre objet. Les vis de réglage sont le plus souvent sans tête, ce qui signifie que la vis est entièrement filetée et qu'aucune tête ne dépasse du diamètre principal du filetage de la vis. La vis de réglage passe à travers un trou fileté dans l'objet extérieur et est serrée contre l'objet intérieur pour l'empêcher de se déplacer par rapport à l'objet extérieur. DU FABRICANT Une vis de réglage est un type de vis généralement utilisé pour fixer un objet à l'intérieur ou contre un autre objet. Les vis de réglage sont le plus souvent sans tête, ce qui signifie que la vis est entièrement filetée et qu'aucune tête ne dépasse du diamètre principal du filetage de la vis. La vis de réglage passe à travers un trou fileté dans l'objet extérieur et est serrée contre l'objet intérieur pour l'empêcher de se déplacer par rapport à l'objet extérieur.

Aucune unité disponible

EAN: 0008236027778

Catégories Industriel et scientifique, Nœuds, Vis et attaches, Vis, Vis de fixation,

Finition en acier inoxydable pour une résistance à la corrosion inégalée. Les variantes incluses vont de #6-32 à 1/2-13 dans les tailles de filetage USS grossier et fin SAE. Les variantes incluses vont de 1/8 à 1/2 de longueur. Idéal pour une utilisation dans des zones confinées où la tête doit être affleurante ou sous la surface. Généralement utilisé pour sécuriser un objet à l'intérieur ou contre un autre objet.

Assembled Diameter	‎#6 Millimeters
Batteries Included?	‎No
Batteries Required?	‎No
Brand	‎Hillman
Certification	‎An
Color	‎Stainless Steel
Country of Origin	‎China
Customer Reviews	4.0 4.0 out of 5 stars 49 ratings 4.0 out of 5 stars
Cutting Diameter	‎#6 Millimeters
Domestic Shipping	Item can be shipped within U.S.
Drive System	Hex Socket
Drive System	‎Hex Socket
Exterior Finish	Plain
Exterior Finish	‎Plain
Fastener Size	‎#6-32 x
Head Style	Hex
Head Style	‎Hex
Head Type	‎Socket
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	2.4 x 1.4 x 1.5 inches
Item Dimensions LxWxH	‎2.4 x 1.4 x 1.5 inches
Item model number	‎3272
Item Package Quantity	‎1
Item Weight	‎0.88 ounces
Manufacturer	‎The Hillman Group
Material	Stainless Steel
Material	‎Stainless Steel
Measurement System	‎Imperial
Metal Type	‎Stainless Steel
Part Number	‎3272
Product Dimensions	‎2.4 x 1.4 x 1.5 inches
Special Features	‎Assortment
Thread Coverage	‎Fully Threaded
Thread Size	‎#6-32
Thread Style	‎Right Hand
Thread Type	‎Un
Usage	‎Wood

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Larry

The size is: screw: #6, Threads per Inch: 32 (Look it up)

These were a great find! My headline seemed like it might be helpful, given apparent confusion about the size of these set screws. The ones I received are of the size advertised.

Scritto da: Garander

Gets the job done .

Its very hard to find 6/32 x 1/8 plug screws . My 1911 slide has been drilled for a Clark rail with a ultradot on it . Its my bullseye centerfire gun . I had the front of the rail notched for the front sight , so i can reinstall the Rear irons , and use the gun on plates during the off season . The Hillman screws with a dab of locktite . Fill the holes quite well when i remove the rail , just got to stop screwing at flush . The allen cap and threads iare cut well . The choices are limited , this does the job .

Scritto da: B. Hemphill

Tiny little fellas that do exactly what they are advertised to do

These #6-32 x 1/8" long set screws (a) screw into a #6-32 tapped hole and (b) hold stuff securely in place when screwed in far enough to make contact with the mating part. And one bag will allow you to do this twenty (20) times (or, in our case, 19 times when one of the little buggers falls to the floor and rolls under the leg of a massive table in the machine shop).

Scritto da: Borin

Arriving in pieces...

Fits good, please send in sealed container, the oversized box had too many gaps that it was a mess in the envelope.

Scritto da: Jacob F.

Would buy again if I didn't already own a lifetime supply haha

Didn't strip out or round my allen key. Cranked on it pretty hard too. It's holding my compensator on my race glock. Also I think it came to me open and spilling out when I opened it the rest of the way. That being said it came with more than advertised.

Scritto da: Craig A. Heupel

good quality but wrong threads

The set screw was a good quality set screw but I needed a fine thread than what was sent.

Scritto da: Sweet Daddy

Used these screws on my AR build

I used these set screws to secure the spring in my AR. Some Lowers require 4-40 threads, but mine used these. I used a little blue loc-tight to keep the threads from corroding .

Scritto da: SanibelBeachNut

total junk.

Arrived on time. Found that they are not barrel but conical in shape, not flat based but crudely pointed. Not to any spec, total junk. Amazon took care of the refund, the box went in the trash.