The Hillman Group 47310 Vis de garniture à entraînement carré 6 x 2,5 cm, acier 0,5 kg

Name: The Hillman Group 47310 Vis de garniture à entraînement carré 6 x 2,5 cm, acier 0,5 kg
Brand: ‎The Hillman Group
SKU: 0008236520569
Price: 43.88 EUR
Availability: InStock

Brand:‎The Hillman Group

3.6/5

€
43.88

DESCRIPTION DU PRODUIT Les vis de garniture sont des vis spécialisées conçues pour fixer les plaques de plâtre aux montants en bois ou en métal. Les vis à tête de coupe sont moins visibles lorsqu'elles sont insérées en raison de la tête plus petite. Les vis à tête de coupe ont un diamètre de tête environ 1/3 plus petit que les vis à tête de clairon. DU FABRICANT Ces vis de garniture sont utilisées pour les moulures à battant et les plinthes, les garnitures, les armoires et partout où des clous de finition sont utilisés. La tête extra-petite se fraise et se cache pour un look fini. La pointe auto-perforante tranchante ne nécessite aucun pré-perçage.

Montant

Ajouter au panier Acheter maintenant

EAN: 0008236520569

Catégories Industriel et scientifique, Nœuds, Vis et attaches, Vis, Vis à bois,

Pour une utilisation dans tous les bois : cèdre, séquoia, bois traité sous pression (ACQ, CA et CCA recommandés). Entraînement carré pour un ajustement sûr du bâton pendant la conduite. La pointe de type 17 et la tête plate éliminent le pré-perçage et se posent à plat avec votre terrasse. Le revêtement en céramique offre une protection supérieure contre la rouille et la corrosion. Les vis à terrasse à tête peinte sont conçues de manière à disparaître de la vue dans l'apparence générale de la terrasse.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	‎The Hillman Group
Color	‎341 Pieces
Customer Reviews	4.6 4.6 out of 5 stars 144 ratings 4.6 out of 5 stars
Drive System	Square
Drive System	‎Square
Exterior Finish	Black Phosphate
Exterior Finish	‎Black Phosphate
Fastener Size	‎#6 x
Fastener Type	‎Trim Screw
Head Style	Flat
Head Style	‎Flat
Item Dimensions LxWxH	4.5 x 2.4 x 3.6 inches
Item Dimensions LxWxH	‎4.5 x 2.4 x 3.6 inches
Item model number	‎47310
Item Package Quantity	‎1
Item Weight	‎1 Pounds
Manufacturer	‎The Hillman Group
Material	Steel
Material	‎Steel
Measurement System	‎Imperial
Metal Type	‎Alloy Steel
Part Number	‎47310
Point Style	‎Sharp
Product Dimensions	‎4.5 x 2.4 x 3.6 inches
Size	‎#6 x 1"
Thread Coverage	‎Partially Threaded
Thread Size	‎#6
Thread Style	‎Right Hand
Thread Type	‎Un
Usage	‎Wood, Drywall

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: HAL

Permanent replacement for finishing nails

First, as others have noted, the product photo is not accurate - the threads indeed go all the way to the head. And the head is actually a little smaller and has longer vertical sides than pictured. That said, these screws are excellent for replacing finishing nails in hot climates where temperature cycling will cause finishing nails to pop-out after a few years. They are also much "safer" in that the risk of a wayward hammer blow ruining the molding I am installing is much less. Finally, I love the "square-drive" head - the risk of the driver popping out during installation (and ruining the wood) is nil! Would be nice if a matching bit was included in the large box I purchased but fortunately I had one from a previous project.

Scritto da: woodguy

Worth it

No problems, love the tourge head

Scritto da: Freeheel

Good screw

I'm glad I found these. Didn't know this screw was made in this length. The head is a perfect size for furniture making because the size of the plug used to hide the screw head is about 1/4" diameter which is the size peg used in furniture making. For some reason I could only find longer ones where I live

Scritto da: Solarsailor

Too short for my need

I originally bought these because I needed some shorter trim screws. However they ended up being too short and were returned.

Scritto da: Kathy S.

I had planned to use standard wood screws but I'm so glad I chose these instead

I friend of mine who is a skilled carpenter advised that I get these 'finish screws' for the custom cabinets that I built for my camper van. I had never used square-drive screws, or even heard of finish screws before his recommendation. I had planned to use standard wood screws but I'm so glad I chose these instead. First I glued up my cabinets with clamps and then pre-drilled and added the screws. They installed very easily and cleanly, and the small head countersinks very well, leaving only a tiny hole to fill with putty. Using screws makes my cabinets stronger (and they need to be strong as they are subject to a lot of vibration on the road) The square drive is easy to use and I already had the proper bit in my driver kit. These are like the best of both worlds between finish nails and wood screws.

Scritto da: DuckWhisperer99

Not for Exterior use

I thought these were for exterior use. Why can’t I find short exterior screws with a trim head? Or 1” exterior trim nails for a 16 gauge finish nailer? This same thing in stainless steel would be perfect. If someone has a link send it my way! Also I’m using them for exterior stuff anyway since I got three boxes. I’ll update with how they hold up. I know I’m not the only person doing exterior projects with cedar fence pickets. They are only 5/8” thick so I need some short fasteners.

Scritto da: B. Westervelt

Good screw in hard to find size

I could not find this size in the hardware store so worked perfectly for me.

Scritto da: billyoysters

Billyoysters

Do not dislike it all great product works great with highly recommend it