Triton Products 76528 DuraHook Coude à 80 degrés 12,7 cm 2-3/4" I.D. Crochet pour panneau perforé à double extrémité fermée en acier zingué pour panneau DuraBoard ou panneau perforé 1/8" et 1/4", paquet de 5 coudes à 80 degrés 5"

Brand:Triton Products

3.6/5

43.46

Les propriétaires d'entreprise, les propriétaires et les particuliers de toutes sortes sont toujours à la recherche de solutions de garage et de rangement d'outils efficaces qui permettent d'organiser, d'économiser de l'espace et de faciliter le stockage de toutes sortes d'équipements et d'accessoires. Le révolutionnaire DuraHook est le choix idéal pour les crochets de panneau perforé à verrouillage à usage intensif, et il est le seul en termes de produits de stockage polyvalents et de haute qualité. DuraHook fonctionne également bien avec le système de panneaux perforés en polypropylène robuste de Triton, DuraBoard. Les DuraHooks ne tombent jamais et ne laissent jamais tomber d'outils sur le sol, ce qui leur vaut la réputation d'être une véritable solution de stockage d'outils robustes. C'est aussi pourquoi DuraHook est connu sous le nom de -InchThe Stay Put Hook-Inch et est recommandé par le Handyman Club of America. Le DuraHook peut également être utilisé avec le reste de la famille de produits innovants de Triton. Cela inclut les Spring Clips et BinClip(s), LocBin the DuraBoard et plus encore. C'est suffisant pour gérer même les défis d'organisation et de stockage les plus difficiles et les plus décourageants.

Aucune unité disponible
Les luminaires s'installent par l'avant, il n'est donc pas nécessaire de retirer la planche pour l'installation ou le repositionnement des crochets durs. Les crochets se montent verticalement et horizontalement dans 4 positions distinctes permettant l'utilisation de plusieurs crochets pour les articles volumineux, lourds et de forme irrégulière. À utiliser sur n'importe quel panneau perforé ou planche à outils de 1/8 de pouce ou 1/4 de pouce. Le système de double verrouillage innovant verrouille le crochet en place avec une languette de verrouillage qui se monte sur le panneau perforé par l'avant. Solution idéale pour ranger les tuyaux, les cordons électriques et tout article petit ou grand avec une poignée qui s'adaptera sur le dessus du crochet inclus.
Assembly required No
Batteries required No
Brand Triton Products
Customer Reviews 4.6 4.6 out of 5 stars 15 ratings 4.6 out of 5 stars
Finish Type Zinc
Finish types Zinc
Included Components Screws, Hooks
Item Dimensions LxWxH 6 x 8 x 2.5 inches
Item model number 76528
Item Weight 1.55 Pounds
Manufacturer Triton Products
Material Polypropylene, Alloy Steel, Zinc
Maximum recommended load 35 Pounds
Mounting Type Wall Mount
Number of Hooks 5
Product Dimensions 6 x 8 x 2.5 inches
Style 80 Degree Bend

3.6

6 Review
5 Star
63
4 Star
37
3 Star
0
2 Star
0
1 Star
0

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: hp
Great, with a caveat for 1/4" metal pegboard
These hooks are the BEST when they work, but the screws my recent DuraHook purchases came with didn't work in my galvanized metal 1/4-inch pegboard (AlligatorBoard brand). When I bought some of these hooks a couple years ago they DID come with working screws. The screws I've received recently are slightly too small to hold in metal pegboard - by maybe about 1/32". Here are the kinds of screws I know of: 1. 1/4-inch screws the hooks I've ordered recently came with (too small for metal pegboard) 2. 1/8-inch screws the hooks also come with (have never used, this is for smaller pegboard) 3. 1/4-inch screws I received in the past (about 1/32-inch larger than the newer ones, work great in metal pegboard) You may see conflicting reviews on this site depending on what kind of pegboard people have and what kind of screws they received. I don't know if the manufacturer (Triton Products) changed the screws they use at some point or maybe there's another reason I received different screws at different times. In any case, I contacted the manufacturer and they were able to send me some of the slightly larger screws that work in metal pegboard. These work great, so you probably want this as Plan A. I wasn't able to find the right type of screws from anywhere other than Triton Products; it's an unusual screw made to hold in thin pegboard, with a very coarse thread and only 1/2" long. If you can't obtain the good screws, I explored a couple other options. If you can access the back of your pegboard, it's simple. Use bolts with nuts. If you can't and need a "blind hole" solution, one option I've found is "well nuts" also known as "rubber-insulated rivet nuts"; these are small rubber plugs with a threaded brass insert. When you tighten a bolt in them they compress and expand. It's not elegant but it works. The size you need is the 6-32 threaded, 1/4" hole size, 0.981" overall length. Pair it with a 1" 6-32 machine screw and perhaps an oversized #6 washer. The caveat with the well nuts is that they are almost an inch long, so you need some empty space behind your pegboard. The shorter well nuts I could find were too large in diameter to fit in the pegboard holes. If you don't have an inch behind your pegboard, you might be able to cobble something together by adding a lot of spacer washers to the long well nuts, or there are also non-removable blind rivets of various kinds (I haven't tried those). The DuraHook definitely will not work if you can't get a firm screw or bolt of some kind into your pegboard to hold them. If you have galvanized metal pegboard, don't plan on using the screws these hooks come with. (Though it's possible they work in some brands of metal pegboard, I don't know.)
Scritto da: L.Johnson
Comparing this to regular hooks it's a five star product.
I am very happy with the Triton products as a whole. I will say I got my board and all the hooks in one order. I painted the wall put up my new board and grabbed the hooks and just grabbed a bag of screws that was there in a pile by the hooks. Put the hook in the board grab the screw and it passed right through, didn't grab nothing but air. I reposistioned the hook, tried again still nothing, for about 5 minutes which felt like an eternity I tried to figure out what I was missing. Then I went back to the multiple bags of screws and noticed that some where bigger than others. I guess the smaller screws are for regular peg board and not the Triton board. Once up it has been great.
Scritto da: Rasta Kitty
Work great, arrived on time , cheaper than other sites
We are using these to hand ready made frames in our frame shop. They work great.
Scritto da: amy hunter
Heavy duty, but screws don't hold
I love all the Triton products I bought for my pegboard. They are built well, stronger than others, and the unique screw system makes them more secure than other pegboard hooks. The only reason I am not giving it five stars is because of the screws. They wouldn't stay in the pegboard. Kept falling out. So I searched through my extra screws and came up with some the exact same size that worked great. The difference is the screws that came with the product are rounded and the ones I found that work are totally flat topped. Don't know why that makes a difference but it's the difference between success and failure. So now I have to spend more money to go buy more of these flat top screws.
Scritto da: Kronin323
Superior product
These are some heavy duty hangars. Seems counter-intuitive to have the screw on the top instead of the bottom but it works quite well. Comes with two sets of screws of different sizes to accommodate different grades of pegboard. So if the screws don't your pegboard, try the other bag.
Scritto da: Larry G
Four Stars
wished I got a few more

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array