Westinghouse Lighting 7741600 Lames de ventilateur de rechange en chêne blanc/blanchi 52 pouces, paquet de cinq

Brand:Westinghouse Lighting

3.3/5

82.01

Les trous pré-percés s'adaptent à la plupart des ventilateurs, comprend également des instructions pour un ajustement personnalisé si nécessaire. Dimensions comme indiqué sur la Figure-1 ; A - trous extérieurs des pales du ventilateur 3-15/16 pouces ; B - trou extérieur de la pale du ventilateur au trou central 2-3/4 pouces. Rétablir l'équilibre et la performance. Les pales de ventilateur de rechange sont compatibles avec la plupart des ventilateurs de 52 pouces. Les finitions réversibles en chêne blanc et blanchi complètent de nombreux ventilateurs de plafond. Remplacez facilement les pales de ventilateur usées ou cassées de votre ventilateur existant avec cet ensemble pratique de cinq pièces.

Les trous pré-percés s'adaptent à la plupart des ventilateurs, comprend également des instructions pour un ajustement personnalisé si nécessaire. Dimensions comme indiqué sur la Figure-1 ; A - trous extérieurs des pales du ventilateur 3-15/16 pouces ; B - trou extérieur de la pale du ventilateur au trou central 2-3/4 pouces. Rétablir l'équilibre et la performance. Les pales de ventilateur de rechange sont compatibles avec la plupart des ventilateurs de 52 pouces. Les finitions réversibles en chêne blanc et blanchi complètent de nombreux ventilateurs de plafond. Remplacez facilement les pales de ventilateur usées ou cassées de votre ventilateur existant avec cet ensemble pratique de cinq pièces.
Brand Westinghouse Lighting
Color White
Electric fan design Ceiling Fan
Finish Type White
Material Highly Durable Molded Plastic
Number of Blades 5
Product Dimensions 5.38"D x 20.5"W x 0.19"H
Special Feature Style Cottage, Fan Blade 52"
Style Cottage
Voltage 120 Volts

3.3

13 Review
5 Star
66
4 Star
15
3 Star
7
2 Star
3
1 Star
8

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Dorothy n David Davis
Good product
Great replacement for our old ones ????
Scritto da: Yellow Earrings
Saved us from having to buy a whole new ceiling fan
We're were replacing a ceiling fan, in two rooms. We bought a new CF for the livingroom. The one in the back bedroom had a broken arm. When we saw these, my husband decided to put the one we were updating in the livingroom into the back bedroom and put these on it to update it. Worked out great.
Scritto da: Ears
Excellent
We loved the replacement blades, went great with the new decor
Scritto da: pking
Great but not the same.
The designed patterns where not the same on two of the blades, it came in one box but two separate fan blade packages possibly different manufactures (I didn't check) One had two blades the other 3 blades ???? The holes where aligned properly but not big enough to fit on to the fans metal blade holder. No big deal, I accepted the close enough patterns and drilled the fan blades holes a little bigger. My question is?? If this is an "Order Again" why the discrepancy between the two orders? Are they shipping left over stuff?
Scritto da: Garrick Berger
Replaced the blades on my RV overhead fan
After breaking a blade in my RV overhead fan by not watching as I pulled in a slide-out), I thought, "Oh boy - I'm going to have to replace the fan. I was happy to find these as they looked identical to the originals. IThey were not quite identical - I had to drill the mounting holes a bit bigger, but that done they are on without issue. I weighed each one and they were all less than half-ounce difference from each other. The balance was fine.
Scritto da: Mary T.
Just what I ordered
Easy to install. Cheaper than a new fan.
Scritto da: Russ
Replaced all the fan blades in my house
I had to drill the holes a little larger to accommodate the screws that I took out and reused
Scritto da: daltonjsmom
Not as advertised AT ALL
The ad said that these were METAL fan blades, so I purchased them to replace fan blades on our screened in porch. I ordered 2 sets. The old MDF ones had begun to droop down from the high Missouri humidity outside. Upon opening, I discovered not METAL fan blades, but ones that on the inside packaging labeled the materials as PLASTIC. Somewhat disappointed, I figured plastic would last longer than MDF ones, so I went ahead and painted them with several coats of Rustoleum Antique Pewter Hammered Metallic paint ($7+/can). 2 of the holes DID NOT line up with our existing ceiling fan, so I had to fill those beforehand. When my husband redrilled the 2 new side holes to fit our fan, they are the same ole MDF fan blades there were a million of on Amazon. By then the fan blades were way too modified to return, so he installed them. Unfortunately, they will also likely droop in the humidity, despite our efforts. The details on both the packaging and Amazon description need updated. If a person wants MDF fan blades in white or weathered oak, they would probably be fine. However, they did not suit our purpose, due to mislabeling.
Scritto da: gloria
Good value
They saved the cost of replacing a totally functional ceiling fan.
Scritto da: JPPoirier
Couleur parfaite
J'ai acheté cet article car je voulais mettre à jour mon ventilateur et le style respecte exactement mes attentes!
Scritto da: MAM
Good value
Look great-easy to install
Scritto da: Amazon Customer
Five Stars
Work great!
Scritto da: Warren K
Doesn’t line up to. Hunter fan
Not universal. Does not fit my hunter fan. Holes do not line up, holes are to small for screws. I’m sending them back.

Produits connexes

hot

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array