0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

Williams EXS-10 Jeu d'extracteurs de vis, 10 pièces 10 pièces

Brand:Williams

3.5/5

€
203.59

Les extracteurs de vis cannelés Williams sont conçus pour un retrait rapide et facile des vis, boulons, goujons ou autres formes filetées cassés à gauche ou à droite. Les tailles de mèches à utiliser sont estampillées sur chaque extracteur. Un trou est d'abord percé dans la tige cassée et l'extracteur Williams de la bonne taille est ensuite inséré. Ce produit est fabriqué aux États-Unis. Depuis plus de 140 ans, Williams fabrique des outils industriels de haute qualité pour des professionnels comme vous. Chaque jour, nous choisissons délibérément notre prochaine innovation de produit en examinant et en comprenant vos besoins, car nous savons que vous appréciez votre travail et que vous êtes fier d'être le meilleur. Nous développons des outils suffisamment solides pour supporter des conditions industrielles extrêmes. Tirer parti de notre héritage de fabrication d'excellents outils, avec les bons matériaux et des spécifications techniques précises. Depuis 1882, Williams fabriquait des produits conçus pour être utilisés en toute confiance.

Montant
Ajouter au panierAcheter maintenant

EAN: 0662459351180

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs, Outils à main, Tarauds et matrices, Extracteurs de tarauds,

Définir les caractéristiques JHWEX-21A, JHWEX-21B, JHWEX-22A, JHWEX-24A, JHWEX-25B, JHWEX-25A, JHWEX-26A, JHWEX-28, JHWEX-29, JHWEX-30. Fabriqué aux Etats-Unis. Un trou est d'abord percé dans la tige cassée et l'extracteur Williams de la bonne taille est ensuite inséré. Les tailles de mèches à utiliser sont estampillées sur chaque extracteur. Conçu pour un retrait rapide et facile des vis, boulons, goujons ou autres formes filetées cassés à gauche ou à droite.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Black
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 164 ratings 4.5 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎Carrying Case
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎JHWEXS-10
Item Package Quantity ‎1
Item Weight ‎4.6 pounds
Manufacturer ‎Williams
Material ‎Carbon Steel
Number Of Pieces ‎10
Part Number ‎JHWEXS-10
Power Source ‎Hand Powered
Product Dimensions ‎9.84 x 13.58 x 2.17 inches
Size ‎10 Piece

3.5

11 Review
5 Star
71
4 Star
15
3 Star
8
2 Star
3
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Amazon Customer
Just as good as the Proto set
These are just the same as the Proto set but in a cloth wrap instead of the plastic box. Get an extra small one as they always break no matter what...
Scritto da: Elizabeth Castillo
Pretty good
The media could not be loaded. They came in really handy about 3 times but the only CON is that you might only get a good use out of them 2 or 3 times because the sharp edges get stripped or dull. I tried using the 15/64 again and it kept slipping, no more bite. The 15/32 saved me alot of time when some guy stripped an M8 hex bolt. Overall i think they're better than the spiraled ones.
Scritto da: Alex T.
Had high hopes
Had high hopes that I could use the 3/8 size in this set to remove a broken 3/8-16 bolt that was broken off flush in a stainless steel plate. Broke because it was very rusted. Drilled into the center of it all the way through, then attempted to use the extractor. Kept applying steadily increasing pressure until the Williams tool started twisting. Stopped and bailed on that idea, ended up drilling it out to 3/8 clearance size and using a nut and lock washer. Perhaps I needed to heat up the bracket before trying this extractor. I did pre soak it in PB blaster though.
Scritto da: Marc D. Perlmutter
Extracted broken spark plug from head of PWC
I neglected to replace the spark plugs in my PWC last year. The few threads that extend into the cylinder (well-known Yamaha MR-1 cylinder 3 issue) had grown some heavy rust over the winter. When I was removing the 4 plugs this spring, #1, #2,  all came out okay but I really had to torque #3 and broke the plug off at the threads. I soaked the threads with Corrosion-X and PB-Blaster for a week and used one of the pieces from this Williams Extractor set with the 1/4" drive. I tapped the head of the extractor with a baby sledge till it took a nice bite into the spark plug threads remaining in the cylinder head and then was able to torque it out of the head, thank my lucky stars! I did the shaving cream in the cylinder trick to catch any bits of metal, chased the threads with a 10mm x1.0 Irwin tap, turned the engine over (with all the shaving cream and metal bits blasting out of the hole, and was able to complete my spark plug change. Be sure to use anti-seize lubricant on the threads per Yamaha's recommendation and remove/inspect/replace your PWC spark plugs every year so you don't have to experience what I went through!
Scritto da: Richard J.
IT works!
I have a 260 John Deere Backhoe and the grease fitting at the very bottom of the boom sheared off. I was very concerned about not breaking the Easy-out off in the 1/4 x 28 thread hole since it would be the very worse place to try and fix. I used Malco SEK1 5/32 left hand drill being very careful not to damage the interior shaft. The grease fitting did not move. I then tried Malco EX-3 but the slope was too great for the spacing between the outside and the interior shaft ( it went all the way to the shaft and was loose) so that did not work. I next tried Rennsteig Dual Edge Screw but the extractor would not bite the grease fitting metal and the extractor just spun and reamed the hole despite several hard hammer blows. I finally tried the Williams 3/8 extractor and after two hammers blows it came out and it in fact split the broken grease fitting into 4 pieces. The new grease fitting went in the hole so it did not damage the threads. I must admit I was concerned that the extractor would break and that was why it was my initial 3rd choice but seeing is believing. I would recommend this product.
Scritto da: Amazon Customer
Worked great,good quality, square definitely gets the bolt out!
Broke frame bolt off in 4430 Tractor
Scritto da: James
Very heavy duty and effective.
Broke an idler pulley bolt off in a $40,000 marine diesel motor. Needed to be really confident in whatever extractor I used. These did the job (as you can see in the picture). They are very heavy duty and high quality. They are NOT the magic solution, though. You need to drill a proper sized hole in the broken bolt, use a little heat, and DO NOT use a drill. I did all of the above, tapped it in with a hammer, attached a t-bar tool from another tap set and the broken bolt came right out without any fight.
Scritto da: Grant & Charity
Excellent tools
These things work like a charm. I use them almost every day at work and they have not lost their edge. They are high quality, American made, and worth every penny. The is a review up here that says they are made in China; that is false. The little bag they come in is made in China. Big whoop. Throw it out if you’re that picky about it. Anyways, if these eventually wear out I’d definitely buy them again, but that won’t be anytime soon. Highly recommend.
Scritto da: Guitar Gord
Well made, and they work!
I've wasted time and money on cheaper versions, but never again! These Williams extractors are well made of quality metal. Extractor size and corresponding drill bit size are clearly marked on each extractor. Feels like the kind of tool you would find on your grandpa's work bench. Simple, solid, effective. I wish tools of this quality weren't so hard to find.
Scritto da: Chris Pelletier
Useful and durable
I'm not quite sure those are branded Snap-on because they are not which is why I knocked off a star. Aside from that, they have done a great job so far and seem durable.
Scritto da: Jeff Jordan
Broken spark plug in head
Worked beautifully.

Produits connexes

hot
Titan 16057 Lot de 7 anneaux d'extraction de boulons endommagés jetables
3.1/5

€ 41.64

Titan 16057 Lot de 7 anneaux d'extraction de boulons endommagés jetables
3.1/5

€ 41.64

hot
Packard Inc 65411 Moteur
3.1/5

€ 102.02

Packard Inc 65411 Moteur
3.1/5

€ 102.02

hot
HHIP 1011-0023 Extracteur de vis n° 3 Taille n° 3
2.9/5

€ 21.01

HHIP 1011-0023 Extracteur de vis n° 3 Taille n° 3
2.9/5

€ 21.01

hot
Rennsteig 9R 471 003 Extracteur à 3 vis à double tranchant, taille 3, noir
3.5/5

€ 34.74

Rennsteig 9R 471 003 Extracteur à 3 vis à double tranchant, taille 3, noir
3.5/5

€ 34.74

hot
Performance Tool W2964 Jeu d'extracteurs à filetage fin – Enlevez les fixations endommagées, gelées ou rouillées du bois, du plastique ou du métal avec tige hexagonale 1/4
0.1/5

€ 27.14

Performance Tool W2964 Jeu d'extracteurs à filetage fin – Enlevez les fixations endommagées, gelées ou rouillées du bois, du plastique ou du métal avec tige hexagonale 1/4
0.1/5

€ 27.14

hot
Kit d'extraction de vis endommagées en titane Speed ​​Out, ensemble de 4 pièces
2.8/5

€ 40.26

Kit d'extraction de vis endommagées en titane Speed ​​Out, ensemble de 4 pièces
2.8/5

€ 40.26

hot
EXTRACTEUR DE VIS 10PC MULTI SPLINE
3.2/5

€ 56.59

EXTRACTEUR DE VIS 10PC MULTI SPLINE
3.2/5

€ 56.59

hot
Extracteur de goujons Powerbuil, supprime les boulons endommagés, saisit et supprime les goujons 1/4 à 1/2 ou 6 mm à 12 mm, compact pour les espaces restreints, entraînement 3/8 - ‎647794M
3.3/5

€ 49.59

Extracteur de goujons Powerbuil, supprime les boulons endommagés, saisit et supprime les goujons 1/4 à 1/2 ou 6 mm à 12 mm, compact pour les espaces restreints, entraînement 3/8 - ‎647794M
3.3/5

€ 49.59

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu