Woodstock D4648 Étau avant d'ébéniste

Brand:Woodstock

3.5/5

262.79

Pour ceux qui construisent leur propre banc d'ébéniste, cet étau avant en acier et en fonte robuste dispose de tout le matériel de travail pour un étau d'établi très solide et de grande capacité. este tornillo de acero resistente y hierro fundido tiene todo el hardware de trabajo para un banco muy fuerte y de gran capacidad. großen Schraubstock , בעלי קיבולת גדולה.بالنسبة لأولئك الذين يبنون مقعد صانع الخزائن الخاصة ب الملعقة الأمامية المصنوعة من الفولاذ الصلب الصلب الصلب الصلب الصلب الصلب الصلب الصلب الصلب الصلب الصلب الصلب لها جميع أدوات الع مل للحصول على زاوية مقعد قوية للغاية وذات سعة كبيرة. ente e ferro fundido tem todo o equipamento de trabalho para um torno de bancada muito forte e de grande capacité.工作硬件,可以提供非常堅固、大容量的長凳对于那些建造自己的橱柜制造台的人来说,这款重型钢和铸铁前虎具有所有工作硬件,可打造非常坚固的大容量长凳遮阳板자체 캐비닛 메이커의 벤치를 만드는 사람들을 위해 이 튼튼한 스틸 및 주 철 프론트 바이스는 매우 강력하고 대용량 벤치 바이스를 위한 모든 작업 하드웨어를 갖추고 있습니다.

Convient aux plans de travail de 1-1/2 d'épaisseur. Grande capacité de rétention. Construction robuste en acier et fonte. Taille de vis : 1 diamètre x 11-1/2 de long. La mâchoire en bouleau massif mesure 13 de long x 3-1/2 de large x 2 d'épaisseur.
Batteries Required? ‎No
Brand Woodstock
Color Beige, Black
Color ‎Beige, Black
Customer Reviews 4.5 4.5 out of 5 stars 169 ratings 4.5 out of 5 stars
Included Components ‎Front Vise
Item Dimensions LxWxH 15.2 x 16.7 x 3.7 inches
Item model number ‎D4648
Item Package Quantity ‎1
Item Weight 14 Pounds
Item Weight ‎14 pounds
Manufacturer ‎Woodstock International
Material Cast Iron
Material ‎Cast Iron
Measurement System ‎Metric
Part Number ‎D4648
Pattern ‎Front Vise
Power Source ‎Hand Powered
Product Dimensions ‎15.2 x 16.7 x 3.7 inches
Style Modern
Style ‎Modern

3.5

11 Review
5 Star
67
4 Star
23
3 Star
4
2 Star
2
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Amazon Customer
Good value, sturdy, but …
My work bench top is 1-3/4” thick so I chose to route the bottom of my bench top to 1-1/2” where it was to be installed. I used two 1/4” lag screws at the back end of the mounting plate. The holes on the front of the mounting plate don’t let you use a lag screw or a screw with a washer. I have several issues: the front mounting holes don’t let you use lag screws or washers - the holes should provide more clearance; the phillips screws provided to mount the wood jaw are cheap and easily strip out the phillips slots; but worst is the wood handle - it’s not threaded so you have to glue it on (the instructions ignore this fact & I hope I don’t have to take it off).
Scritto da: Brad
Good solid vise that’s pretty easy to install
Overall, I’m happy with this vise and it meets my needs. I installed it on a new work bench and the installation was very easy - drill 3 holes in your bench face for the guide rails and screw, secure with 6 screws. You do have to disassemble the vise but it’s very simple. It takes less than an hour. The jaw throat in this vise is about 4 1/2 inches, so take that into consideration when drilling dog holes into your bench top. I spaced mine 4 inches apart and that works fine. You do get some racking when clamping on just one side (this happens with round guide bar vises vs square). You can use a block in the other side of the vise to minimize this issue. At first, I was a little concerned that the mounting screws seemed a bit undersized. Once you install all of the screws though, the vise is very solid. I don’t expect any issues. Remember this is made to clamp wood, not steel. Overall I believe this vise is a very good value and meets my needs. Please note the blue bench dogs in the vise and not included.
Scritto da: Abelardo Perez
Good for a workbench
Easy to install.
Scritto da: Eric Balazich
Good first vice
Good basic vice for beginner woodworker. It does rack easily when holding a piece on just one side of the clamp. To be expected from a single screw vice at this price point though. Just put a piece of scrap that is slightly smaller on the other end of the jaw to counter balance the pressure and your good to go.
Scritto da: Peter Colgan
Really nice unit
This thing works great. I installed it Per Ron paulk on my total station. With the 20mm connector dogs. It’s a nice addition.
Scritto da: Kindle Customer
Poor mounting options
The vise works well if you can get it mounted. It is designed for a 1.5 inch solid wood benchtop with a significant overhang and no bracing underneath. The description mentions this, so my bad. However, the mounting holes on the vise plate are poorly placed. Only two of the six mounting holes are accessible from underneath. I had to bolt it through the top and file down the nuts and washers to mount it. Only four fasteners, not six like it should have. It works well enough, but be sure to evaluate your mounting surface and location before purchasing.
Scritto da: lungunie
Nice
Works great nice addition to my work area
Scritto da: Doug Bowker
Great, solidly made Bench-Vice
This vice is a very solid value for the price they are asking and should well last a lifetime from what I can tell. All the parts are very heavy duty, the wood is nice and solid, and the screw-thread is precision cut. Installing it might be tricky upside down, but I was building my bench at the time so I just had the bench top flipped over anyway.
Scritto da: Amazon Customer
Very good quality
Very good qualiy
Scritto da: Janus
Not a fan.
It twists when you put something in one side.
Scritto da: Amazon Customer
Buen producto
Taller de casa

Produits connexes

hot
Yost Étaux 445 Étau combiné
3.8/5

€ 171.33

Yost Étaux 445 Étau combiné
3.8/5

€ 171.33

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array