Yost Vises F10WW Étau de menuisier

Brand:Yost Tools

3.6/5

168.06

Cet étau d'ébéniste est l'outil parfait pour votre atelier à domicile. Effectuez des travaux de menuiserie ou d'assemblage d'armoires en toute sécurité et facilité. Cet étau robuste a un corps en fonte pour plus de durabilité et une vis principale en acier massif pour plus de polyvalence. Yost Vises produit des étaux et des accessoires d'étau de haute qualité depuis 1908. Nous fournissons nos produits aux grands distributeurs et aux artisans individuels du monde entier, allant des étaux de qualité industrielle, des étaux de qualité professionnelle, des étaux de qualité atelier, légers à lourds. étaux de service, étaux multifonctions, étaux de soudage, etc. Nos produits respectent ou dépassent la norme industrielle de la spécification fédérale GGG-V-410A, offrant aux consommateurs des produits de qualité qui durent des années à un prix avantageux.

GARANTIE : Livré avec une garantie limitée d'un an et un retour de 90 jours. INFORMATIONS DE SÉCURITÉ : Une mauvaise utilisation des étaux peut causer de graves blessures aux yeux, aux mains et/ou à d'autres parties du corps. Les étaux doivent être installés et utilisés correctement. Avant l'installation et l'utilisation, lisez, comprenez et suivez toutes les instructions décrites dans le manuel. Qualité Yost Vises : chaque outil Yost Vises est conçu pour avoir des normes élevées de qualité, de résistance et de durabilité. Nous privilégions la qualité à la quantité et fabriquons des produits sûrs et faciles à utiliser. Nous offrons un support technique à vie pour soutenir notre garantie de qualité. Meilleure utilisation : dans la fabrication d'armoires, en particulier pour fixer 2 pièces en bois ensemble pendant que vous percez ou sciez le bois. Peut être utilisé pour serrer et aligner vos projets de menuiserie. Caractéristiques techniques : étau 10-1/4 largeur x 19-1/4 longueur, vis 1-3/16 diamètre x 15-1/2 longueur, tiges de guidage 3/4 diamètre. ÉTAU AVANT : L'étau de menuisier Yost Vises F10WW de 10 pouces est l'outil parfait pour votre atelier à domicile. Fabriqué avec un étau robuste, il a un corps en fonte pour plus de durabilité et une vis principale en acier solide pour plus de polyvalence.
Batteries Required? ‎No
Brand Yost Tools
Color Blue
Color ‎Blue
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 470 ratings 4.5 out of 5 stars
Included Components ‎One Vise
Item model number ‎F10WW
Item Package Quantity ‎1
Item Weight 6.36 Kilograms
Item Weight ‎14 pounds
Manufacturer ‎Yost
Material Cast Iron
Material ‎Cast Iron
Measurement System ‎US
Package Dimensions ‎22.83 x 11.97 x 2.99 inches
Part Number ‎F10WW
Power Source ‎Hand Powered
Size ‎10" Front Vise
Style Modern
Style ‎Modern

3.6

11 Review
5 Star
69
4 Star
22
3 Star
6
2 Star
2
1 Star
1

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: AnthonyF
Excellent vise! Great value for your money!
I was building a Moravian workbench, but wanted to use a modern face vise instead of a leg vise. I picked this because it was light enough for me to attach to my bench top but still have the portability features of a Moravian bench. I was very pleasantly surprised by how well this vise works, and the value for quality of the parts. All the parts mate and align well. The instructions have some typos (e.g. the page with the instructions for the 10" version refers to the product with the 9" model number), but if you follow the instructions you will get a nicely installed vise with extra allowance that they recommend you have. (I was originally skeptical and added extra allowance, and ended up with double when I first did a dry fit. So the instructions where right on.)
Scritto da: GL
Take your time. Check your measurements. Install takes time.
Solid and great woodworking addition for end of my workbench. After reading reviews I knew I’d need to carefully think through the install, make mods to bench to accommodate the vise, drill holes in correct location. Don’t rush, be patient. Think every step through twice. Took me 1 1/2 - 2 hours to complete install but no regrets. Has added so much versatility to my bench. Wish I’d done this years ago. No handle provided. Used 1” dowel and had to sand to fit. Then bought round knobs from hobby store and bored to fit handle. Not a quick release but spins easily to open /close.
Scritto da: DianeH
Very Good Heavy Duty Vise
I installed this vice two weeks ago. It took some time, but most woodworkers will have the skill to mount it properly. It's much more heavy duty than my previous Rockler vise, who's threads wore out after only about ten years of hobby use, and this ones about half the cost of the Rockler. It comes with instructions that are fair, so I advise to look at some youtube videos and take your time to get it right. In use it's strong, easy to open/close, and it holds wood in place very well. I put about a two degree tilt to the closing surface so that the top engages before the bottom, this really makes it a nice vise.
Scritto da: Daniel J. Herkes Jr.
Nice large vice.
I needed a large vise to hold various objects that I repair. I am not a woodworker, but often repair furniture. This vise can be modified to almost any configuration, so take your time and plan the installation. A couple of notes: 1) The vise can be completely disassembled. There is a spring pin holing the handle in place that must be driven out and back in with 1/8" drift pin. Do not clamp it with pliers! 2) I used soft pine (2x12) for the jaws as to not damage what I will hold in place. The jaws can be easily replaced when worn. For other uses, recommend facing the jaws with maple or oak. 3) The tee handle could be a 1" dowel. I used a chunk of 3/4 water pipe and two reducers. It's a bit loose, but two cable ties keep it in place.
Scritto da: bestatchess
Good Vise for the money
I have installed two of these. Things I used: Good forstner bits with a good extender (tight fitting, doesn't wobble): allows clamping and drilling of both vise jaws at the same time, with backer board to prevent blowout 1" diameter hardwood dowel for the handle maple flagpole finials with 1" hole for the handle end caps .02" thick PETG plastic sheet, approximately 2.5" length by 3.5" circumference rolled up and inserted into the handle hole in the vise to form a bushing, secured by external circular beads of hot glue which form bump stops for the finials. Suggested improvement: A paper template for drilling the holes.
Scritto da: William E. Allcock
Works great; Great vise for the money if you can do without the quick release
90+% of the time I am working with 1" or less stock on edge, so the lack of a quick release was no big deal for me. I am an amateur, part time, wood worker, so for my needs this is great. Mounting it was pretty easy (see pic). I did have some interference problems, but that was because of my (custom) design. I have no idea if this would hold up for day in, day out usage, but if you are a part time woodworker like me and the lack of a quick release wont bother you, I highly recommend this vise.
Scritto da: ROBERT CHOW
ok
ok
Scritto da: Amazon Customer
Big and strong
With a little imagination, install to your liking. A professional vise for a professional carpenter. More than satisfied with this product
Scritto da: Papa B
Works well installed nicely.
I used this as an end vice with my ash bench build works very well, little trouble installing.
Scritto da: timethinker
Solid Vise for the money
Very nice and solid Quality Vise just add your own wood ????
Scritto da: Jean
Facile a installer
Super qualité pour le prix wow c’est parfait

Produits connexes

hot
Yost Vises Étau de propriétaire LV-4
3.6/5

€ 108.70

Yost Vises Étau de propriétaire LV-4
3.6/5

€ 108.70

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array