0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

Youngstown Glove Gants de travail synthétiques d'usage général résistants aux coupures pour hommes - doublés de Kevlar - gris moyen (paquet de 1)

Brand:Youngstown Glove Company

3.4/5

€
66.30

YOUNGSTOWN GLOVE COMPANY Depuis plus de 20 ans, nous créons des gants de travail de qualité supérieure conçus pour être le meilleur ami des monteurs de lignes, des travailleurs des services publics, des ouvriers du bâtiment, des mécaniciens, des soudeurs et d'un éventail toujours croissant d'emplois. LES SEULS GANTS POUR LE TRAVAIL ; Ces gants en kevlar sont disponibles dans les tailles petites à 3x grandes. Ils sont parfaits pour une grande variété de chantiers. Parfait pour le fil de fer barbelé, l'aménagement paysager, la construction et le recyclage. MEILLEURE PROTECTION ; Notre conception 3D robuste offre à vos doigts, articulations et paumes une protection qui couvre toute la main. Nous vous donnons plus de matériel et de protection là où vous en avez besoin. Nos gants de travail en kevlar sont conçus pour la sécurité avec une coupe seconde peau. SÉCURITÉ ÉVALUÉE ; Les gants de travail polyvalents gris utilisent une manchette ajustable à boucles et à crochets et une protection complète en Kevlar. Ils sont résistants aux perforations et aux coupures. Certifié résistant aux coupures ANSI/ISEA 105 niveau A4 et résistant aux perforations ANSI/ISEA niveau 4. CONFORT ET PRÉCISION ; La construction 3D unique de Youngstown donne à vos doigts une meilleure dextérité, adhérence et mobilité. Nous combinons une grande mobilité avec une coupe ergonomique confortable qui vous garde au frais et prêt à affronter tout ce que la journée vous réserve. Lavage en machine à l'eau froide, à l'air libre ou séchage en machine léger. Fermeture crochet et boucle. Importé. Nylon 30% / Polyester 25% / PVC 15% / Polyuréthane 10% / Kevlar® 9% / Coton 8% / Caoutchouc 2% / Velcro 1%.

Montant
Ajouter au panierAcheter maintenant

EAN: 0757894603007

Catégories Outils et amélioration de la maison, Sécurité, Équipement de protection individuelle, Protection des mains et des bras, Gants de laboratoire, de sécurité et de travail Gants de sécurité et de travail, Gants de travail de sécurité,

YOUNGSTOWN GLOVE COMPANY Depuis plus de 20 ans, nous créons des gants de travail de qualité supérieure conçus pour être le meilleur ami des monteurs de lignes, des travailleurs des services publics, des ouvriers du bâtiment, des mécaniciens, des soudeurs et d'un éventail toujours croissant d'emplois. LES SEULS GANTS POUR LE TRAVAIL ; Ces gants en kevlar sont disponibles dans les tailles petites à 3x grandes. Ils sont parfaits pour une grande variété de chantiers. Parfait pour le fil de fer barbelé, l'aménagement paysager, la construction et le recyclage. MEILLEURE PROTECTION ; Notre conception 3D robuste offre à vos doigts, articulations et paumes une protection qui couvre toute la main. Nous vous donnons plus de matériel et de protection là où vous en avez besoin. Nos gants de travail en kevlar sont conçus pour la sécurité avec une coupe seconde peau. SÉCURITÉ ÉVALUÉE ; Les gants de travail polyvalents gris utilisent une manchette ajustable à boucles et à crochets et une protection complète en Kevlar. Ils sont résistants aux perforations et aux coupures. Certifié résistant aux coupures ANSI/ISEA 105 niveau A4 et résistant aux perforations ANSI/ISEA niveau 4. CONFORT ET PRÉCISION ; La construction 3D unique de Youngstown donne à vos doigts une meilleure dextérité, adhérence et mobilité. Nous combinons une grande mobilité avec une coupe ergonomique confortable qui vous garde au frais et prêt à affronter tout ce que la journée vous réserve. Lavage en machine à l'eau froide, à l'air libre ou séchage en machine léger. Fermeture crochet et boucle. Importé. Nylon 30% / Polyester 25% / PVC 15% / Polyuréthane 10% / Kevlar® 9% / Coton 8% / Caoutchouc 2% / Velcro 1%.
Brand Youngstown Glove Company
Color Gray
Manufacturer Youngstown Glove Company
Material Synthetic Leather, Stretch Nylon, Kevlar
Size Medium
Size Medium (Pack of 1)
Special Feature Adjustable,Cut Resistant,Puncture Resistant

3.4

13 Review
5 Star
69
4 Star
16
3 Star
5
2 Star
4
1 Star
6

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: M. Irving
Not razor blade resistant
Beware of razor bladed box cutters. Not fully puncture resistant either- I’m glad I wasn’t wearing them when I conducted a scissors poke test. Fit is accurate.
Scritto da: Tdoggnasty
THESE GLOVES SAVED MY FINGER!
I don't usually write reviews on products, probably because none have had such an impact on my life as this one. This pair of gloves saved my pinky finger on my right hand. I originally purchased them because I had to cut down an Oak Tree with probably 30-40 cords of wood that had to be cut up and split. I researched cut resistant gloves on Amazon and came upon these gloves. I am no stranger to gloves and was originally underwhelmed with this pair. I thought they lacked some things, such as real tactile grip. I realize now that this was probably because they were brand new and needed to be scuffed up a little. The situation came when they saved my finger was not when I was using a chainsaw or anything having to do with a tree. I also farm, and the disc I use to plow the fields has several 375lb concrete weights attached to it to keep it deep in the ground. Occasionally one of these weights will become dislodged. One of these weights did in fact dislodge and was stuck between the set of discs. I happened to have these pair of gloves on me and decided with a friend we could move the weight and continue on with our plowing of the field. While trying to move the 375lb weight one of the discs moved, rotated the weight and the disc, then lodged my finger between both the disc and weight. I tugged my right hand out quickly and my finger sliced between the weight and the disc and was almost sure that my finger was gone. What was left was a surprise to everyone, especially me. My glove did not have a mark on it. I pulled my glove off and my hand was visibly traumatized. There was a slice in my finger just above the knuckle where it had been pinned between the 375lb weight and the disc, yet there was no slice in the glove, it was completely intact. I believe had it not been for this pair of gloves my pinky finger would have been lost. Instead, I was left with all use of my fingers and I am extremely grateful for this company for not taking any shortcuts and lining 100% of the glove with tear and cut resistant Kevlar. Obviously they are not tear-proof, or cut-proof, nothing is. However, these are definitely cut and tear RESISTANT and they saved my finger. Don't be cheap or too tough, buy a pair.
Scritto da: Ron Erese
A go-to for my family
Like the CQR pants I just reviewed, these have been an essential purchase for my family while doing forestry work. We've found them effective in protecting our hands from thorny brush, stopping thorns from getting through like on other gloves. Something extra for me, the extra padding around the rest is vital because it has protected the back of my wrist from repeated pressure while I would depress the guard on a chainsaw. )461's guards are firm and the padding helps from getting a bruise.) One criticism I have is that I have to watch the inside base of my fingers on this glove because if I don't, it is easily to overlook I'm pinching the skin there and at the end of the day, realize it can lead to substantial blisters, which I don't feel are developing. I'll update this review as needed. Thanks for reading!
Scritto da: C. Simmons
Work great for barbed wire.
I bought these gloves for working around rusty barbed wire and gaucho wire. I have used these pretty heavily to remove brush and later to remove and roll up the old wire. These gloves have preformed amazingly. After removing and rolling up about 5000' of wire, not a single pricked or cut finger. The outside cover of the gloves had many snags from the sharp wire but nothing penetrated. They stay on the hands well and continue to protect even after over a year of use. I have also used them for chain saw work.
Scritto da: Combat Vet OZ
Great for Barbed Wire handling!
Bought two pairs of these for my wife and I to take down barbed wire fencing over 5 acres of our land, including coiling it up for disposal. These worked great! They protected our hands PERFECTLY! Never felt anything from the barbed wire; not one bit. Highly recommend!
Scritto da: P. Lopresto
Quality general utility glove
I've been known to go through work gloves quite frequently and was looking for something different to try. I found these on Amazon and decided to give them a try. I purchased the medium (per the manufacturer's suggestion) since my hand measured almost 9 inches around the knuckles. The fit is a little snug in the webbing area of my thumb, but work gloves usually loosen up after a few uses. Surprisingly, the index finger is a little too long for my finger, so delicate work may be an issue. However, I love the build of the gloves with the padded knuckles and back of hand. And the palm and fingers are reinforced and have an abrasive finsh that will help with gripping. The only draw back I have so far is that these gloves seem to make my hands sweat a little more than other gloves I've had. I can't comment on durability yet since I've only had them a few days, but I'll try to update as time goes on.
Scritto da: Burney Cain
TOUGH GLOVES
The wife works for an arborist and had finally wore out a pair of the same gloves. For all the logs, twigs, branches needing to be moved after cutting, these lasted the longest for her. Nothing would do but get another pair of the exact same glove! Comfortable and saves her hands and fingernails!
Scritto da: JSSt
Best Gloves I Could Find
I ordered size medium for my small hands with room so they wouldn't be too snug while working. Used them once before using them for my intended chainsaw tasks. I like the adjustable wrist strips with Velcro attachment. My only complaint is the itchy tag on the inside, which I cut out, but part of it still remains in the seam area.
Scritto da: Ralphael
Reminds me of my Motorcycle gloves
I got two left hand gloves in my order and will be getting a replacement, but during the time I tried them on they reminded me of my motorcycle gloves. I'll be using them with my Dremel Motosaw and my Dremel rotary tools, of which most of the internet is against wearing gloves when operating anything that spins and will catch your gloves and entangle your whole hand within. However the gloves are snug fitting and unlike other cut-proof gloves that are woven, the outside of this glove seems to be leather thus I would think it would offer a good protection from a slight brush up against the moot-saw without catching. In addition you are protected by another layer of kevlar. Although I won't be testing the gloves by placing my hand directly against any cutting tools, I would wear them as I would wear safety glasses where I won't be sticking my head closer just because I feel safe wearing safety glasses; they are worn for that extra layer of protection just in case. I like the material and at this point in time, I would recommend these gloves if you work with cutting tools.
Scritto da: cody kopp
Gloves can’t handle regular use more for show
I got false advertised to believe I was getting two pair needed a pair of gloves so I didn’t return them used them for work and they just couldn’t hold up despite Kevlar simple sparks grinder still burnt through gloves Kevlar and your getting polyester melting your skin, should’ve bought leather because there ain’t no Kevlar in these gloves and sub stained a good burn. Can’t return them and I can’t use them so I guess I got a pair of gardening gloves.
Scritto da: Jack
Worse gloves
Only 5 months! Palm side is open. And middle finger also have a big hole. How could I expect it to cut resist???
Scritto da: Jetsue
Fits like a Glove
This glove is very comfortable to wear. The fingers are flexible therefore, making it easier to work and feel what you are doing. The velcro attachment around the wrist gives it a secure feeling on your hand and wrist. This is much better than wearing Garden gloves.
Scritto da: Aniie
Very stiff but work well
Was expecting better softer to wear gloves for the price. Do the job and hard wearing but not great value for money overall

Produits connexes

hot
Mechanix Wear : Gant de travail FastFit avec manchette élastique pour un ajustement sûr, gants de performance pour une utilisation polyvalente, gants de sécurité compatibles avec écran tactile pour homme (noir, grand) Grands gants noirs
3.7/5

€ 39.30

Mechanix Wear : Gant de travail FastFit avec manchette élastique pour un ajustement sûr, gants de performance pour une utilisation polyvalente, gants de sécurité compatibles avec écran tactile pour homme (noir, grand) Grands gants noirs
3.7/5

€ 39.30

hot
Grease Monkey Bone Series Gants de mécanicien en mousse de nitrile avec grip moyen (lot de 1)
3.6/5

€ 23.14

Grease Monkey Bone Series Gants de mécanicien en mousse de nitrile avec grip moyen (lot de 1)
3.6/5

€ 23.14

hot
Carhartt pour homme en cuir de grain isolé avec manchette de sécurité Gants pour temps froid, marron, grand US
3.6/5

€ 61.26

Carhartt pour homme en cuir de grain isolé avec manchette de sécurité Gants pour temps froid, marron, grand US
3.6/5

€ 61.26

hot
Ironclad KONG SDX2-HAD-05-XL Gants d'impact de sécurité pour le pétrole et le gaz à haute dextérité à l'abrasion, X-Large X-Large (Lot de 1)
3.4/5

€ 53.40

Ironclad KONG SDX2-HAD-05-XL Gants d'impact de sécurité pour le pétrole et le gaz à haute dextérité à l'abrasion, X-Large X-Large (Lot de 1)
3.4/5

€ 53.40

hot
MAGID Gants de travail de protection électrique Lineman en cuir, 1 paire, taille 11, 1250111, à utiliser avec des gants isolés en caoutchouc, perle 11/XXL 1 paire
2.8/5

€ 42.41

MAGID Gants de travail de protection électrique Lineman en cuir, 1 paire, taille 11, 1250111, à utiliser avec des gants isolés en caoutchouc, perle 11/XXL 1 paire
2.8/5

€ 42.41

hot
MCR Safety MU3624GFRM Gant de conducteur utilitaire Mustang, grain de chèvre double paume non doublé, dos en Nomex®, cousu en Kevlar®, pouce ailé, protection des mains, utilitaire, construction, 1 paire, moyen
0.1/5

€ 87.16

MCR Safety MU3624GFRM Gant de conducteur utilitaire Mustang, grain de chèvre double paume non doublé, dos en Nomex®, cousu en Kevlar®, pouce ailé, protection des mains, utilitaire, construction, 1 paire, moyen
0.1/5

€ 87.16

hot
Mechanix Wear : Gants de travail en cuir synthétique Material4X M-Pact, gants de sécurité avec protection contre les chocs et absorption des vibrations, résistance à l'abrasion, gants de travail pour homme (marron, grand)
3.7/5

€ 55.40

Mechanix Wear : Gants de travail en cuir synthétique Material4X M-Pact, gants de sécurité avec protection contre les chocs et absorption des vibrations, résistance à l'abrasion, gants de travail pour homme (marron, grand)
3.7/5

€ 55.40

hot
National Safety Apparel G51TCVB11514 Gant Thermobest avec écusson supplémentaire en Nomex sur la paume, grand, jaune
0.1/5

€ 135.44

National Safety Apparel G51TCVB11514 Gant Thermobest avec écusson supplémentaire en Nomex sur la paume, grand, jaune
0.1/5

€ 135.44

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu