Zenna Home NeverRust Barre de douche en aluminium antirouille en forme de L, 68 x 28, nickel satiné

Name: Zenna Home NeverRust Barre de douche en aluminium antirouille en forme de L, 68 x 28, nickel satiné
Brand: Zenna Home
SKU: 0043197151179
Price: 144.83 EUR
Availability: InStock

Brand:Zenna Home

3.3/5

€
144.83

La tringle de douche d'angle en forme de L en aluminium NeverRust de Zenna Home offre une excellente solution pour toute salle de bain avec une baignoire ou une douche partiellement fermée. Cette tringle de douche en aluminium légère mais solide est garantie à vie contre la rouille. Contrairement à l'acier ou même à l'acier inoxydable, l'aluminium ne rouillera jamais. La tige de 1 pouce de diamètre contient tous les anneaux ou crochets de douche standard et est solidement fixée sur deux murs avec quatre vis dans chaque support de montage. Avec ses embouts, la tige en forme de L s'adapte dans une zone allant jusqu'à 68 pouces de long et 28 pouces de large. La tige peut être facilement coupée pour les petits espaces. (La tige réelle mesure 66 pouces sur 28 pouces.) Des instructions faciles à suivre avec des illustrations sont incluses.

Montant

Ajouter au panier Acheter maintenant

EAN: 0043197151179

Catégories Maison et cuisine, Salle de bain, Autocollants pour fenêtres, Rideaux de douche, Crochets et doublures, Tiges de rideaux de douche,

GARANTI À VIE CONTRE LA ROUILLE : La tringle de douche ne rouillera jamais. Fonctionne avec n'importe quel crochet ou anneau de douche : utilisez cette tige en nickel satiné avec des crochets ou anneaux de douche standard pour accrocher votre rideau de douche ou doublure préféré. FACILE À MONTER SUR LES MURS AVEC LE MATÉRIEL INCLUS : La tige se fixe au mur aux deux extrémités ; comprend des vis et des supports de montage pour une installation permanente sécurisée. Des instructions illustrées vous montrent comment couper la tige pour s'adapter à votre douche : pour des longueurs et/ou des profondeurs plus courtes, des instructions illustrées sont incluses montrant comment couper facilement (avec une scie à métaux ou un outil similaire) une ou deux des extrémités pour un ajustement personnalisé. TIGE DE DOUCHE IDÉALE POUR LES ESPACES DE BAIN OÙ UNE TIGE RÉGULIÈRE DROITE OU COURBÉE NE FONCTIONNERA PAS : la tige antirouille en forme de L s'adapte à la plupart des baignoires et douches standard (jusqu'à 68 pouces de long et 28 pouces de profondeur). Importé. Fabriqué en aluminium.

Assembly required	Yes
Batteries required	No
Brand	Zenna Home
Color	Satin Nickel
Country of Origin	China
Customer Reviews	4.3 4.3 out of 5 stars 795 ratings 4.3 out of 5 stars
Fabric Type	Made of Aluminum
Finish types	satin nickel
Import	Imported
Included Components	Shower Rod
Is Discontinued By Manufacturer	No
Item model number	33941BN
Item Weight	1 Pounds
Manufacturer	Zenith Products Corporation
Material	Aluminum
Maximum recommended load	25 Pounds
Mounting Type	Wall Mounted
Number of pieces	1
Product Dimensions	68 x 28 x 5 inches
Product Dimensions	68"L x 28"W

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Shannon C.

It was fine, I just didn’t need it

Ordered by mistake

Scritto da: Dewey c.

Looks good we’ll packaged all pieces there

Looks good haven’t put it up will be awhile it will go in a cabin I think it will work good

Scritto da: Marley L

Works well enough, looks okay.

This looks decent after installation, I've had it up for about two months now and its doing well without a ceiling support. I do try to be very careful about tugging on the curtain or putting anything heavy on the rod. We are using a thin, clear shower curtain. I had to trim down the rod to fit my space which was 57 inches. I used a jig saw to trim the pieces as it was all I had and really needed two people while attaching the bar to the brackets. My biggest complaint is that the screw that hold that two pieces of bar together is stripped out, im probably going to have to glue it so that it will stay in. Overall, i would buy this again, but you get what you pay for. Updated 12/31/18: It’s been about seven months and I have added photos, this is holding up really well, I am upgrading my review from a 3 to a 4 because it still feels pretty solid. Updated 06/08/2019: My shower curtain rod is still in good condition. I haven’t had any problems and still haven’t glued or done anything with the stripped screw. It looks the same as in the photos. Update 9/18/2021: rod is still going strong and working perfectly

Scritto da: Carol R. Taylor

Economical corner rod surprisingly strong

I have actually had this rod installed for about ten years and one of the brackets broke when it started to be used frequently for family use rather than occasional guest room use. So all I really ended up using from this purchase was a new bracket, because I was too lazy to cut the new rod to the right length so I reused my old rod. That said, I examined the new rod carefully and there are a number of negative reviews here that just show no common sense! The L shaped piece has to be facing the right way for the width of the rod to be right. The person who said it was too short simply had it reversed. The screw facing up? Come on people. Drill a hole all the way through the outside pipe and insert the provided screw from the bottom so the shower curtain will slide properly. . It’s not rocket engineering! Installing is a little tricky. The way my rod was orinally installed, the long side was just a little too long for where the bracket at the end of the tub was installed, which put stress on the fitting holding up the rod. I put the new bracket up exactly where it was before, but took about 3/8 of an inch off the other end of the pipe. You don’t want a lot of torque on the rod; it should fit snugly but not have extra pressure applied to the bend. It’s surprising to me that this rod holds true and strong enough without a ceiling support at the bend, but it does. Very economical solution.

Scritto da: IAmNottheDude

Clawfoot Tub Surround

With two sets of this and the interior rod of the old shower curtain rod to join the two sets, I got the perfect fit to surround the clawfoot tub. Three sides have uninterrupted travel for the curtain rings. For the fourth side, I placed an expandable rod that I already had. It won’t hold much beyond the curtains and curtain rings, but placing it high out of reach prevents accidentally grabbing it. Affordable solution to the tub surround problems and it looks nice.

Scritto da: Scott Laverty

Consider Your Shower Layout

Cheap, durable and easy to install. The only issue I had was that my shower was reversed from the product, so I had to flip it upside down. To make this work, I had to re-drill a whole on the opposite side of where the current screw is that holds the extension so that the curtain wouldn’t catch on it when opening and closing. If the company simply makes two holes on opposite side, it will then be interchangeable. For a DIY person, it was simple and took only 30 minutes to make the adjustment and install the product.

Scritto da: William P. Dietz

Missing pieces but overall made it work

Got this for a corner tub. Size worked well. For the direction we had to use it the screws are in top and the curtain is catching a little but will get new shower rings to accommodate. Box says it comes with 8 wall anchors and screws only came with 4 which is why I rated the sturdiness so low

Scritto da: Janna B. Dean

Surprisingly sturdy and looks good

Once everything is tightened up it is sturdy enough for a basic curtain without the corner support. Although I did shorten the short leg to about 13” so that helps but it is sturdier than expected once installed and tightened up

Scritto da: Carson

Good and solved out problem. Price higher than my expectation.

This thing solved our lone time problem. It’s longer than I need but very easy to cut. I used a hand tool to cut it, cost about 5min. It’s softer than I thought. The installation took me about 15min including measurements, very easy to do. I was worrying it may fall of the wall when I place the curtain on, but it’s stable, no problem. Should be able to last for sometime. For the price, it’s higher than my expectation, but similar stuff are all at same price range, so, not too much to complain.

Scritto da: Kumar M P

US quality from US made in China.

Great product, lovely finish, if fixed well can look and work marvelously, one star less is for two things, 1 Chinese item shipped from America? Took a very long time to arrive and 2 the two joining screws with bulging heads that create Hassel to slide the shower curtains across, I am trying to get heedless screws and that should solve the problem

Scritto da: Mackenzie Crumb

Great for price, easy to install, a bit weak but does the job

Great to find a shower rod with the dimensions we needed, without spending hundreds of dollars. We have tiling around the tub and so couldn't buy a standard sized rod. However, this was a perfect length, and was just a few inches short of the width (which we knew when we bought it, and just built a short extension from the wall to drill it into.) Easy installation, not the strongest but holds the shower lining fine. Just wouldn't hold a heavier cloth curtain, but that's okay, can't complain!

Scritto da: Bala S

Uneven surface caused by the screw

The screws in yhthe joints are obstructing the free flow of moevement of curtains...very uncomfortable. Not value for money spent...

Scritto da: Tanya C

Works very well

Very happy with this. Good solid mounting brackets and can work with long or standard tubs (you might have to cut it). Due to the weight of the shower curtains we did put a decorative chain for added support from the curve in the rod to the ceiling. It's a bit expensive, but frankly worth it.