AmpFlow P40-250 Elektromotor, 250W, 12V, 24V oder 36VDC, 3400 RPM, Schwaarz

Brand:AmpFlow

3.5/5

107.45

Den AmpFlow P40-250 ass en Héichmoment Pancake-Stil Motor entwéckelt fir gutt Leeschtung an Effizienz zu engem ökonomesche Präis ze liwweren. Dëst gëtt erreecht duerch d'Benotzung vu véier Pinselen a fortgeschratt elektromagnetesche Computermodelléierung an Design. De Motor ass 4,0 Zoll Duerchmiesser an 3,2 Zoll laang. De Schaft fiert an zwee héichqualitativ Kugellager. Déi schwéier-Jauge Motor féiert sinn 14 Zoll laang. De Motor weegt 4,2 Pond, an et ass fäerdeg an engem héichqualitativen schwaarze Puddermantel. Dëse reversiblen Motor kann mat Spannungen tëscht 12V an 36Vdc benotzt ginn. Bei 24 Volt ass d'Nobelaaschtungsgeschwindegkeet 3400 RPM. D'bewäertte Stroumausgang ass 250W bei 2800 RPM bei 14 Amp. Peak Effizienz ass 78%. Dëse Motor gëtt mat engem 11-Zänn Sprocket fir #25 Roller Chain geliwwert. Sich no AmpFlow Motore fir méi Choixen.

Kuerz Pancake Motor mat 11-Zänn Sprocket fir # 25 Kette. Spëtzeffizienz bei 24V: 78%. Kontinuéierlech Muecht: 250 Watt (1/3 horsepower). No-load RPM-: 3400 bei 24 Volt; Kann mat Spannungen vun 12V bis 36VDC benotzt ginn. Miessunge 4,0 Zoll Duerchmiesser (102 mm) x 3,2 Zoll laang (81 mm).
Brand AmpFlow
Country of Origin USA
Horsepower 0.33 hp
Is Discontinued By Manufacturer No
Item model number P40-250
Manufacturer AmpFlow
Model Name P40-250
Package Dimensions 5.6 x 5.4 x 5.1 inches; 4.2 Pounds
Speed 3400 RPM
Voltage 24 Volts, 12 Volts

3.5

13 Review
5 Star
69
4 Star
19
3 Star
4
2 Star
8
1 Star
0

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: Gereth
Works great
Using as a generator with 3d printed wind turbines. Good consistent output, been running outdoors in the cold for about a month without issue (covered of course).
Scritto da: Brad
Recommended
Good little motor.
Scritto da: Anthony Yong
Nice little motor.
Low noise motor. Note that manufacturer used loctite on the nut thread, so if you want to remove the nut, use a gas/propane torch and heat for about 10 to 20 sec to soften the loctite. To loosen the nut need to turn clockwise, use a wrench to hold the sprocket as there is a slip ring between the sprocket and motor spindle. Intend to fix onto my bike later, once the other parts arrive.
Scritto da: Keith Francis
Good motor
I got this motor for a project I'm building. The motor has proven to be strong with no issues. It will run on a wide voltage range (9v to 36v). This made it a great motor for my purposes and I plan on buying more of these for other projects in the future. Shipping was ok, a little slow for my taste, but still arrived with no defect.
Scritto da: Bob
Doesn't hold up well.
With 24v after 10-15 minutes it starts smoking, barely turning with no torque at all.
Scritto da: Amazon Customer
fast
fast shipping is the most important product as described, I highly recommend it
Scritto da: Exceldkai
Better than expected.
Great motor worth its price. Easily reaches near its top rpm rating with some load. Tested w 24V nominal and it was about 3000 rpm. Don't go for cheapies. Get this one.
Scritto da: Jim
good buy
Good strong motor just as advertised. easy to mount and simple wiring. will continue to use this seller for future items
Scritto da: Christopher allan ford
awesome motor runs smoothly just the motor sprocket won't work with my setup
The media could not be loaded. I'm happy with the motor just not happy about the customer support and the sprocket option for my setup I can't run the 1/4" roller chain I need the 1/2" bicycle sprocket for the motor
Scritto da: Claude
Great motor
Great motor
Scritto da: Amazon Customer
Five Stars
Great motor, very responsive from top to bottom of the voltage range. TONS of Power!!
Scritto da: David Knight
Four Stars
Ok
Scritto da: jacques
Five Stars
bien

Zesummenhang Produiten

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array