Arnold 490-241-0028 16-Zoll x 4.8-Zoll Snow Thrower Pneu Ketten

Name: Arnold 490-241-0028 16-Zoll x 4.8-Zoll Snow Thrower Pneu Ketten
Brand: Arnold
SKU: 0037049946938
Price: 103.30 EUR
Availability: InStock

Brand:Arnold

3.3/5

€
103.30

Wann Dir wëllt datt Är Outdoor Kraaftausrüstung méi laang dauert a méi mécht, wëllt Dir Arnold Deeler, Accessoiren an Uschlëss. Bitt Iech eng grouss Varietéit vun Topqualitéit, Schnéi-frëndlech Produkter, Arnold Wanterdeeler an Accessoiren kréien Är Ausrüstung duerch déi kal, schneeweeg Méint. Kompatibel mat Tonne vu grousse Marken, 50+ Joer bewisen Leeschtung huet den Arnold e Ruff vun opzedeelen Produktinnovatiounen an Ingenieursexpertise gelant. Passt an de populäre Modeller (awer net limitéiert op) 31AE5KLF795, 31AE5KLF801, 31AE6FHF552, 31AE640F206, 31AE660F129, 31AH6LKH722, 31AH6ZFH529, 31AH6ZFH529, 31AH, 4CG1, 31AH, 4CG1, 31AH, 4CG1, 31AH, 31AH, 31AH, 4CG1 3678, 317E633E401, 31AE5E3G643, 31AE6GKF500, 31AE6LLG791, 31AE640F088, 31AE640F678, 31AH5F3F100. 131 , 31A-5E3F643, 31AE6C0F300, 31AE640F161, 31AE660G500, 31AE660G678, 31AH6ZFH700, 31AH6ZLG704, 31AY64S34B01, 31AY64S34B01, 31AY64S34601 , 31BY5FT3678, 317E640F700, 31A-640F678, 31AE6FKF500, 31AE640F131, 31AE644F205, 31AE653F100, 31AE660F100, 31A660F105F1, 31A660F1062 1AH6ZHG500, 31AH64KF515, 31AS6LCG552 , 31AS640F352, 31BE5MLG729, 31AE5MLG729, 31AE6C0F022, 31AE6C3G515, 31AE6LLG790, 31AE640F138, 31AE640F149,1321, 31AE640F149, 1321 AH5F3F190, 31AY54T3650, 31BH5Q3G401, 316E640F352, 31AE5E3F190, 31AE5E3F643, 31AE5KG513, 31AE558F099, 31AE558F099, 31AE558F099, 51AEG H529, 31AE640F000, 31AE653F401, 31AE653F643, 31AE664F352 , 31AE664G352, 31AH5C3F100, 31A-6LEF500, 31AE5E3F101, 31AE5KLG801, 31AE553F401, 31AE6C0F033, 31AE6FG1AE700, 31AE60LFG700, 31AE60LFG700, 400 1AH5C3F190, 31AH64FF529, 31AH65CG500, 31AS6LEF500, 31AS6ZCG500, 31AV66KN614, 31CE660F129, 317E640F000, 317E640F000. F382, 31AE6C0F503, 31AE6LLG722 , 31AE640F382, 31AE664G500, 31AY5RKG643, 317E640F088, 31AD5L3F190, 31AE6Q0F034, 31AE640F500, 31AE653F1010, 31AE653F1010, 31AE653F1010, 31AE653F1015 31AT640F678, 31AV6FHN614, 31AV6FKN614, 31AY54T3678, 31BE640F206, 317E640F382, 31AE6B0H515. 4EG701, 31AV6WKN614, 31AY6WKN614, 31BE640F131

Betrag

An de Weenche leeën Kaaf elo

EAN: 0037049946938

Kategorien Patio, Rasen a Gaart, Outdoor Power Tools, Ersatzdeeler & Accessoiren,

Enthält zwee Pneuenketten. Bitt zousätzlech Traktioun bei schlechtem Wieder. Nëmme fir knobby Pneuen. Passt 16 x 4.8 Schnéiwerfer Pneuen. Ersatz Schneewerfer Pneuenketten. Nëmme fir knobby Pneuen. Installatioun Uweisungen mat Produit abegraff. Enthält zwee Pneuenketten. Bitt zousätzlech Traktioun bei schlechtem Wieder. Passt 16 x 4.8 Schnéiwerfer Pneuen.

Country of Origin	China
Customer Reviews	4.2 4.2 out of 5 stars 356 ratings 4.2 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	No
Item model number	490-241-0028
Item Weight	2.85 pounds
Manufacturer	Arnold Corporation
Product Dimensions	6.75 x 6.75 x 5.25 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Sue

Excellent chains!

These chains are a game changer on my Ariens 24" Platinum SHO with EFI. They make plowing through deep heavy snow uphill possible. Something i couldn't do before. Installation is "easy", if you take your time, and ensure that the chain is tightly applied to the tire as you go (the same way you have to tightly apply pipe thread tape to a pipe). The first chain went on effortlessly, and i struggled a little bit with the second. I had a buddy help me latch the clasp on the second chain, which made the job even easier. You must set the snowblower in the "maintenance position", to do the install otherwise it will be near impossible to wrap the chain evenly across the very knobby tire. I wish i had purchased these sooner.

Scritto da: Glenn M

Good design but lacking enough closure links

There are two links to make the final inboard connection where there should be three. I had an awful time installing them, ahd to deflate tires, multiple failed attempts with vice grips, levers and hooked tool. I ended up adding one link to the second tire. I just couldn't get the lever lock to pull the opposite chain links. My tires are luggded 4.80"

Scritto da: larry p.

Chains

Was sorta difficult to get chains real tight.it was probably just me.but different way to tighten would be nice

Scritto da: RavensRoost

Good Chains, but doesn't fit Ariens Platinum SHO 30 very well

I put these on my Ariens Platinum SHO 30" snowbeast, but unfortunately they settle into the highly grooved tread. I had read earlier similar report before buying. This snow year was brutal in UT and wanted a bit more traction. I probably ran these on the beast for about 20-30 hours so far this year. They MIGHT (might) give slight grab on the sidewalls in deep snow and slush so I left them on. I did take the wheels off and deflate to put them on which was necessary (thanks previous reviews!!!) to avoid more discouraging words uttered. I do think they are fairly good quality design and i like the design idea of the diagonal orientation of the cross chains, but they just are small enough to settle into the knobby tread. If i had a different wheel on it with less knobbiness, then these would be 5-star.

Scritto da: Toolman

Good fit

Works great for snow hog snowblower tires

Scritto da: Amazon Customer

Scritto da: JimW

Quite a battle to install

These chains fit my 28" Troy-Bilt snow thrower but they are incredibly tight. It took me over an hour to install them and most of that time was spent wiggling and adjusting the chain to get enough slack to fasten the locking clamp. Even then it was difficult to lock the pelican hook style latch. I will likely leave the chains on and never take them off. Other than the installation problem, these look like they will do the job.

Scritto da: Gary in CT. USA

They do fit, if you work at it.

These chains will fit a 16" tall 4.80x8 snowblower tire, if you work at it long enough. ( provided they sent you the right ones.) Drain the gas, put the blower up in the maintenance position, so you can spin the tires, let all the air out of the tires, ALL OF IT. Lay the chains out like the instructions say, then drape them over the tire, with the cross chain connectors facing out, ( ends not into tire.) and the S hook on the inside. Connect the inside "S" hook first. Then just keep spinning the tire, looking for slack anywhere you can get it. When I started, It was 6 inches away, keep working on it, they will fit, It may not seem like it at first, but they will fit. Fill the tires back up to about 16 PSI. ( Pray for snow. )

Scritto da: Mike

Easy to install.. Not

Just got these today. Ordered size as per my tire. Followed instructions to the letter. Could not get these tire chains on for the life of me. Supposedly the extra links help and you're are supposed to tie back or cut off these links after installation. The C hook will hook up with much groaning and labour but the locking mechanism won't reach the last link of the chain. Build is great quality, but even several views on YouTube din't even helpme get these puppies on the tire. Will try once later after I get my breath back otherwise back they go. Anyone out there have a solution?

Scritto da: Jetpilot

Snow thrower chains

These tire chains were put onto a Cub Cadet snow blower. They were a bit of a pain putting them onto the tires. I had to do some adjusting to the chains, by removing a few links. I had to cut them off with a bolt cutter. They fit perfect now and the snow blower will ready for a snow storm come Winter.

Scritto da: ParrySounds

Good, only alternative I was able to find for Cub Cadet

These are used on a Cub Cadet snowblower. A bit of a pain to install and I needed to use zip ties to secure them. They seem to be working although the hooks sometimes release and need to be reattached. A nuisance, not a problem. I was unable to find an alternative when I ordered them. They are certainly better than no chains.

Scritto da: sniperbob01

Should have bought them sooner

They fit perfectly with the knobby tires that they were made for, dont even need to deflate the tires just a little patience. Night and day difference in traction. Really should have bought them years ago.

Scritto da: Phil m.

Best way to apply chains IMO

Once I removed the tire and rim, laid out chain on workbench and deflated the tire, it was a 5 minute process per wheel, chain fits well as to what I ordered and seems to work quite well so far after one use in.