Arnold (490-325-0012) Rasenmäher Frontrad-15 Zoll Universal Fit, 15

Brand:Arnold

3.5/5

121.67

Wann Dir wëllt datt Är Outdoor Kraaftausrüstung méi laang dauert a méi mécht, wëllt Dir Arnold Deeler, Accessoiren an Uschlëss. Bitt Iech eng breet Varietéit vun ouni Problem, Topqualitéit Produkter, Arnold Deeler halen all Är Ausrüstung an déi bescht méiglech Form. Kompatibel mat Tonne vu grousse Marken, 50+ Joer bewisen Leeschtung huet den Arnold e Ruff vun opzedeelen Produktinnovatiounen an extensiv Ingenieursexpertise gelant. Vu Basis Ënnerhalt bis grouss Innovatiounen, Arnold huet alles wat Dir braucht fir d'Ausrüstung ze halen sou wéi et Saison no Saison soll. Mat Arnold kënnt Dir zouversiichtlech sinn op en zouverléissege Produkt mat enger korrekter Passung, Design, Material a Konstruktioun. Zousätzlech zu zouverléissege Deeler an Accessoiren, dem Arnold seng einfach ze verfollegen Instruktiounen an extra Tipps erliichteren Ären Ausrüstungshaltung a garantéieren datt Dir d'Aarbecht richteg gemaach hutt.

Keng Unitéiten verfügbar
INKLUDERT: Inhalter enthalen ee virun Rad mat Rimm Assemblée, an 3/4 Zoll Duerchmiesser Achs. Fir detailléiert Installatiounsinstruktiounen, kuckt w.e.g. op Är Instruktiounshandbuch. INFLATE PROPERLY: Richteg opgeblosen Pneuen daueren méi laang, bidden eng besser Traktioun an Hëllef beim Niveauofschneiden Ersetzen Äre Pneu wann et Schued a sichtbare Pneuenverschleiß ass oder wann de Pneu den Loftdrock verléiert. Ersatz: Ersetzt all Saison flaach oder verschleeft Rasenmäher Rieder fir Är Maschinn richteg ze halen. Turf Saver Tread bitt exzellent Traktioun op Gras a Gras. VERSATILE: Passt MÉI awer net all Ariens, Handwierker, Cub Cadet, Husqvarna, John Deere, Poulan, Poulan Pro, Troy-Bilt an déi meescht Rasentraktoren mat engem 15 Zoll x 6 Zoll Frontrad mat 3/4 Zoll Achs. Pneuen huet eng 300 lb. Belaaschtung Bewäertung, Turf Saver Tread, Nylonlager an 2-Ply Bewäertung. KOMPATIBILITET: Universal 15 Zoll x 6 Zoll Front Wheel Assemblée fir Troy-Bilt, Handwierker an John Deere Lawn Tractors mat 3/4 Zoll Achs, Ersetzt M123810, GY20638, 634-05067. Universal Deel fir Rieder ugefaange mat 532106108, 532122073, M123810, GY20638, 634-05067, 734-0731 an 634-05066.
Brand Arnold
Country of Origin USA
Customer Reviews 4.5 4.5 out of 5 stars 1,485 ratings 4.5 out of 5 stars
Exterior Finish Machined
Is Discontinued By Manufacturer No
Item Diameter 15 Inches
Item Weight 7.85 Pounds
Manufacturer Arnold
Material Nylon
Product Dimensions 15 x 15 x 6.5 inches
Rim Size 15 Inches
Rim Width 6 Inches
Size 15"
Vehicle Service Type Mower
Wheel Backspacing 3.5 Inches
Wheel Size 15 Inches

3.5

12 Review
5 Star
73
4 Star
13
3 Star
7
2 Star
2
1 Star
6

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: B R
Changed my life!!!
This tire changed my life. Previously, I’ve been dragging my riding lawnmower around with a rope. Then somebody pointed out I could put tires on it! I didn’t believe this to be so, but I ordered tires from Amazon and it was incredible! I highly recommend these tires.
Scritto da: mcg 79
Fit cub cadet lt1046
Seems like this was just what I needed
Scritto da: Philip Byrd
Easy to mount.
It was the right fit.Easy to mount.
Scritto da: CoolBoomer
Nice Wheels & Tires Took 10 Minutes to Change
These came with a set of bushings and a spacer for each wheel so that they fit the two common different size spindles. The bushings are some sort of man-made material (nylon?) and the inboard ones have a grease fitting built into them. Another review mentioned putting the grease fitting on the outboard side--*no way*--the directions show the fitting side facing the mower not the outside. You still need to put on your outer washers, C-clip and dust cap. These came pre-inflated and look like good tires, every bit as good as the ones that came on my Murray tractor. Why mess with getting the inner tubes replaced and all when you can just pop these out of the box, swap them and be done with it. Hope this review was helpful.
Scritto da: J. Fox
Look good, but not a fit for all mowers mentioned
The tire arrived fully inflated and looks good. The install was relatively painless. However, these wheels are not to OEM spec for my mower, a 2012 LTX 4200 Cub Cadet, even though the description stated they are. The original Cub Cadet wheels have a deeper cylinder for the grease fittings and bushings. The result with the new wheel is that it cannot hold the grease fitting in place for long, even after I've hammered it in with a rubber mallet and added the C-clip. The grease fitting will come out of the cylinder in the middle of the wheel after driving about 50 feet. The result after the grease fitting comes out is a constant, annoying swealing. It also does not stay inflated for a reason I have yet to discover. MAKE SURE THIS WHEEL IS AN EXACT MATCH TO YOUR MOWER AND OEM NUMBER.
Scritto da: Franky Lynn
Very good "high flotation" wheel and tire update.
Very good "high flotation" wheel and tire. I honestly think this wheel and tire combo is almost overbuilt for anything a person might use it for. The tire is big and soft, yet holds air indefinitely. I need something to hoist a standby motor generator that weighs over 200 pounds, as well as other heavy items, so I am building an all electric "mobile derrick" which will have a tiltable A-frame, a tiltable boom on top of that, and a winch with 1800 pound rated cable for lifting things. This "mobile derrick" will be using the three Arnold 15-inch Lawnmower wheels that I have purchased. The tires are big enough to give my "mobile derrick" the ability to traverse soft ground. This wheel/tire combo does not come with any ball bearings, just cheap plastic bushings, one of which has a grease zerk molded into it for pumping grease inside the wheel hub. The Arnold wheel/tire combo is very heavy duty and well built, so if your wheel uses 3/4" O.D. bearings and they are still serviceable, then this wheel will probably work. In my application mentioned above, I am going to permanently mount the wheel onto 3/4" axles, and the axles will rotate on pillow bearings.
Scritto da: MnW
bushings wear out too fast
the bushings wear out very fast on these but our local people stopped selling them. they're more expensive than they should be but install fairly easily.
Scritto da: Draco76123
Perfect fit
Just bought a used Craftsman YT3000. Previous owner replaced one of the wheels with one that was a little thinner and not fitting the axle well so it wiggled around alot. This was a near perfect replacement. It matched the original perfectly and fit snug on the axle with the included spacers. The axle inserts are plastic with built in plastic grease fitting, took me a minute to figure out it was a grease fitting since I've never seen a plastic one before, but I won't remove a star for it. It took me less than 5 minutes to swap it out with the old one. Only time will tell regarding durability, I'm guessing the axle inserts aren't going to last nearly as long as metal ones, but we'll see, it could surprise me.
Scritto da: Shawn R
Very Impressed!
Was pleasantly surprised that the tires on these were the same as the originals on my garden tractor., Carlisle Turf- Saver. These come with plastic bushings instead of the original metal ones, so I am a little concerned about their longevity, but we'll see what they look like after a full season. The outside diameter of the hub is smaller than the original, so my original dust covers were too big. I was able to make the old ones work, at least temporarily, but will probably have to get proper ones at some point.
Scritto da: MJB Ontario
Good Quality
Just need to check the axel size will not work on 5/8 inch axel and does not include an adapter for that size.
Scritto da: Rod
Works
cannot grease it and cannot install cap.
Scritto da: Cam
poor quality
These wheels have cheap plastic bushings instead of bearings. I don't recommend.

Zesummenhang Produiten

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array