C.S. Unitec Elektresch Paint Stripper - Paint Stripper - Beton / Hard Material Kit - EOF 100 PCD Paint Remover Maschinn Entfernt: Dréchent Lack, Lack, Latex, Méi haart Material Disc abegraff - Made in Germany C) EOF 100 Beton / Hard Material Kit

Brand:CS Unitec

2.6/5

1132.68

CS Unitec's EOF 100 PaintStripper läscht effizient an effektiv bis zu 5x méi séier wéi Sander Tools op verschiddene Materialien aus Holz, Putz, Beton, Metall a méi. Den EOF 100 Entfernungsinstrument enthält: elektronesch Softstart, ergonomesch Soft-Griff / rutschlos Handle, an aktualiséiert justierbar Staubschutz, déi et erlaabt stabil direkt op de Rand vun enger Uewerfläch ze strippen. Genau Déift Upassung op 1,0 mm fir Materialentfernung ouni Fräsen an de Substrat. 2 Zorte vun Ersatz Carbide milling discs verfügbar (Holz / Soft Material P / N 37124000 Fir Beton / härter Material P / N 37125000). Dëse Lackstripper läscht Lack, Faarwen, Graffiti, Harz, Beschichtungen, Feststoffer, Spraydousen a fettegen Dreck aus Holz, Putz, Beton an aner Flächen ouni ongesonde Geroch oder Belaaschtung vu geféierleche Chemikalien. Spezifikatioune: Gewiicht: 7lbs Load Speed: 10.000 rpm Spindelverbindung: M14 männlech Komponenten abegraff: 1x EOF 100 Paint Peeler, 1x Case, 1x Assemblée Tools.

Milling Head Duerchmiesser 4, Déift Upassung 0,1 mm ze 1,0 mm, 7lbs, Ersatzbar PCD Milling Discs Fir Gebrauch op Beton / haart Material (P / N 37125000) Scheif fir Holz / mëll Materialien (P / N 37124000). Stëbsextraktiounsport fir d'Beliichtung un ongesonde Geroch a geféierleche Chemikalien ze reduzéieren (wann se mat Staub Extraktioun Vakuum benotzt ginn). Tool Fir ze benotzen op Holz, Beton, Metall, Fligeren, Schëffer, Decken, Siding, Maueren a méi. Niddereg Clearance - Mill Right To The Edge. Dëse Liichtgewiicht, Heavy-Duty Professionelle Planer läscht Lack, Lack, Graffiti, Latex, Harzen, Beschichtungen, Feststoffer, fettegen Dreck, Spraydousen a méi. Den EOF 100 elektresche Lackschrapper ass bis zu 5x méi séier wéi traditionell Power Sanders mat manner Schwéngungen, Soft Start, an ergonomesch Handle fir e verstäerkten Bedreiwerkomfort.
Country of Origin Germany
Is Discontinued By Manufacturer No
Item model number EOF 100 CT
Manufacturer CS Unitec
Package Dimensions 23 x 12.4 x 11.75 inches; 15.85 Pounds

2.6

8 Review
5 Star
51
4 Star
9
3 Star
8
2 Star
8
1 Star
23

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: TwoHerbs Workshop
Heavy, but really works
I used this to strip the side of my house that hadn't had the paint really touched (they just painted over cracked paint and such) for 60 years and it worked very well. It is heavy, thus one has to get used to the weight and take a break occasionally (I was working on a 2 story ladder.). It's expensive and there is a learning curve. One reviewer complained about the stop in the depth adjuster, it is supposed to be there to limit how deep one can go. If you have to, you can get around it, but if it's too deep, you are going to have problems. The first one I ordered (I bought the kit) did not have the blade or the nut for holding the blade on, Amazon was very helpful and sent a new unit right away that had all the parts. That blade is expensive, but it should last a long time if one doesn't use it to take out nails (:>), which I did a couple of times, but still works great. I also used it to remove 100-year-old paint and coatings off of some very nice old wood (oak and southern pine) and it worked well for that also. BTW, that blade can hurt DAMHIKT.
Scritto da: jeff edick
UPDATE
comes with no blades incredibly expensive. well I've been using this shaver for weeks now, and once i got it "zeroed" then added one or two clicks down it works great. It's explained in the instructions. I complained earlier about not receiving any blades with the machine. I had to order them separately. Oh well. Once I practiced on some old boards with lots of built up paint I moved to my cedar siding and SYP trim. Quickly removes all the paint it can reach, I set it very shallow and leave it there and move back and forth several times and 5 layers of old paint gone nicely. I follow up with 60 and 80 grit random orbital sander, 1/4 sheet and mouse sanders for the corners. This product is heavy and appears rugged and well made. I hit several nails the blade did chip but I have done an area 12 X 12 including deep soffits, so far the blade cuts well, I even cut the tip off my pinky (skin), I learned to shut the thing off before adjusting. I hook the thing up to my dry vac, works great. All in all a real time saver, just set the blade so it barely cuts and the wood will have minimal damage for re-sanding.
Scritto da: iloveamazon
False Advertisement
Why would you advertise 13 amps when the motor itself only runs max at 9.6 amps? Yes those extra amp makes a difference, its one reason I went with the EOF 100 over the Paint Shaver Pro. Thought I was getting a stronger motor for less money. I'll be sending it back to Amazon to get the Paint Shaver Pro instead. Update: 5/9/21 Besides the false advertisement of the 13amp motor. The machine does bog down a little but it does what they say it will. I just finally got a chance to use it and on my attemp to adjust the depth of the disc didn't go well, it is now stuck and the shroud no longer turns back freely. Amazon agreed to send another one while I send this back.. Hoping this is just a lemon and the next one will work. If it does I'll definitely raise this up to 4 stars regardless of the 13 amp motor being a 9.6 amp because it still saves time and money. Also just realized they updated their stock photo to 9.6 Amps instead of 13 amps. Thank you! Update 5/11/21 My replacement unit came and its defective!! One of the notch that the depth adjustment pin goes in has something in it that won't allow full adjustment. I'm honestly starting to think they are the harbor freight of german tools. Downgrade from 2 stars to 1!!!!
Scritto da: duc tran
Speed control needed
It works very well for wooden surfaces ( paint and wood floor coatings). It will get 5 stars from me if it has variable speeds such as festool sanders or bosch sanders .
Scritto da: Fernando Montado
The paint shaver .
The paint shaver works perfectly well... I strip the whole house in 4 days .. My workers do light sanding in Whether boards and its looks great , ready to primer and paint . Thank you very much for this product.. Montado painting and decorating Ltd .
Scritto da: Amazon Customer
Found damaged upon opening
Will update on how it is resolved
Scritto da: Kathy
Used and broken
The item was used and it doesn’t work. They need to stop doing it to waste people time. Stop listing used and defected items for sell. Now it put my work behind because I have to order another one.
Scritto da: Ranch Fence
pretty good!
We used it hard and it held up. DON'T HIT NAILS! every nail you hit costs about 20 buck worth of the blade / wheel. on off button sticks now and then and the height adjustment doesn't work that great after the motor got hot and distorted the housing a bit. buy it, it works well. we rode it hard and put it away wet.

Zesummenhang Produiten

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array