Cen-Tec Systemer 94434 Antistatesch naass / dréchen Vakuum Schlauch fir Shop Vacs mat Universal Power Tool Adapter Set, 16 Ft, Blue 16 Ft. Schlauch

Brand:Cen-Tec Systems

3.4/5

€
177.54

Cen-Tec's 94434 ass konstruéiert fir eng komplett elektrostatesch dissipativ Staubsammelschlauchléisung ze bidden déi all gréisser Marken vu Kraaftwierker mat Vakuum verbënnt fir e gegrënnte Schockfräi Aarbechtsëmfeld ze garantéieren. Den 94434 huet dräi verschidden an eenzegaarteg Schnellverännerungsinstrumentverbindungen zur Verfügung gestallt. Dës Stecker sinn entwéckelt fir 360-Grad Schwenkverbindungen am Tool ze bidden fir Spannungen aus dem Schlauch ze reduzéieren, déi d'fräi Bewegung vum Kraaftwierk iwwer d'Aarbechtsfläche verhënneren. Déi zwee Bajonett-Tool-Adapter hunn eng agebaute Loftrelief, déi d'Upassung vum Vakuum erlaabt fir d'Versiegelung op d'Aarbechtsfläch ze verhënneren an genuch Loftfloss zum Vakuum ze garantéieren fir d'Liewen vum Motor ze schützen. Den 16 Fouss konesche Schlauch huet e glat Interieur fir d'Vakuumleistung ze verbesseren. Tapering vun 1-1 / 4" um Tool Enn fir maximal Flexibilitéit ze maximéieren, de Schlauch gleichméisseg verspéit wéi et an de Vakuum bis zu engem 1-1 / 2" bannenzegen Dimeter verlängert. Déi konesch Form erhéicht de Loftfloss a gëtt ergänzt vum Cen-Tec sengem propriétaire Schlauchend entworf fir den bannenzegen Duerchmiesser an de Vakuum ze vermeiden Verstoppt. D'94434 Adapter sinn fir Kompatibilitéit mat all gréisser Marken vun Power Tools entwéckelt, dorënner Bosch, Festool, Milwaukee, Hitachi; Fein; Kobalt; Porter Kabel; Black an Decker; Dewalt, Ryobi a vill private Label Marken vun Tools a Stëbs Sammelstécker. Den 94434 ass kompatibel mat grousse Tool Mark Staubsauger an ass och kompatibel mat grousse Marken vun Heemgeschäft Staubsauger wéi Shop Vac, Ridgid, Craftsman, Vacmaster, Dustless, Fein, Cobalt, Dewalt, a Festool.

Betrag

An de Weenche leeën Kaaf elo

EAN: 0810178031566

Kategorien Tools & Home Verbesserung, Power & Handwierksgeschir, Power Tool Parts & Accessoiren, Vakuum & Stëbs Collector Accessoiren, Schlauch,

Kompatibel mat grousse Tool Mark Staubsauger an ass och kompatibel mat grousse Marken vun Heemgeschäft Staubsauger wéi Shop Vac, Ridgid, Craftsman, Vacmaster, Dustless, Fein, Cobalt, Dewalt, a Festool. D'Adapter si fir d'Kompatibilitéit mat all de grousse Marken vun Power Tools entwéckelt, dorënner Bosch, Festool, Milwaukee, Hitachi; Fein; Kobalt; Porter Kabel; Black an Decker; Dewalt, Ryobi a vill private Label Marken vun Tools a Stëbs Sammelstécker. De propriétaire elektrostatesche konduktiven 2-1/4 "Tank Enn ass entwéckelt fir d'Ouverture an Ärem Vakuum ze maximéieren, d'Vakuumleistung ze verbesseren an de Risiko vu Verstopptung vu méi groussen Dreck ze reduzéieren. Dem Cen-Tec säi Bajonettsystem bitt 360 Grad Rotatioun fir Spannungen aus dem Schlauch ze reduzéieren an d'fräi Bewegung vun Ärem Kraaftwierk ze erlaben. Den haltbaren Acetal Clip erlaabt e séieren Änneren vun den Enden, eliminéiert verluer Zäit an hëlleft Iech séier vun Tool zu Tool ze bewegen, wat Iech hëlleft Äert Buttek Ëmfeld sécher a propper ze halen. Déi zweet konduktiv Schnellwechselbajonett mat engem konduktiven 1-1 / 2 "mëllen TPE-Adapter ausgestatt fir mat Kraaftwierksgeschir entworf mat enger 1-1 / 2" männlech Verbindung. Dësen zweeten Adapter ass mat dräi konzentresche Réng um bannenzegen Duerchmiesser entworf fir ze garantéieren datt et op der Plaz bleift an Uwendungen mat schwéierem Dreckfluss ënner héije Vakuum wéi fonnt mat Mitersägen. Fonctiounen eng elektrostatesch konduktiv (ESD) 1 "Soft TPE baséiert Outil Adapter fir mat all gréisser Marken vun Muecht Handwierksgeschir an shrouds mat engem 1" männlech Verbindung oder 1. 425 "weiblech Verbindung ausgestatt. Den Adapter ass mat véier konzentresche Réng um bannenzegen Duerchmiesser entworf fir eng positiv Leckbeständeg Verbindung ze garantéieren déi op der Plaz bleift wann d'Tool am Gebrauch ass. Den 1 "Adapter ass op en elektrostatesche konduktiven Schnellwechselbajonett ausgestatt mat a Loftrelief fir d'Kontroll vum Vakuum z'erméiglechen fir fräi Bewegung vum Kraaftinstrument ze garantéieren. De Schlauch kombinéiert e glat Interieur, exzellent mechanesch Eegeschaften, mat permanente antistatesche Charakteristiken ouni schwaarz Flecken oder Markéierung. De Schlauch ass 1-1 / 4 "wou et mat dem Kraaftwierk verbënnt fir eng verbessert Flexibilitéit an eenheetlech am Duerchmiesser op 1-1 / 2" um Vakuum Enn ze verlängeren fir e super Loftfloss ze bidden an d'Verstoppung ze reduzéieren. 16 Fouss konesch kommerziell Schouljoer Enn bis Enn elektrostatesch dissipative Stëbs Sammelen Schlauch Léisung fir grouss Mark Muecht Handwierksgeschir ze Buedem Vakuums oder Vakuums ze verbannen, déi geännert goufen eng Buedem Léisung fir dissipation vun statesch Käschten ze schafen.

Assembly required	No
Batteries required	No
Brand	Cen-Tec Systems
Color	Blue
Customer Reviews	4.4 4.4 out of 5 stars 112 ratings 4.4 out of 5 stars
Item model number	94434
Item Weight	3.09 Pounds
Manufacturer	Cen-Tec Systems
Material	Thermoplastic Elastomer
Material	Thermoplastic Elastomer (TPE)
Package Dimensions	17.38 x 17.22 x 7.41 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: faron sturtz

Great customer service and product by Cen-Tec

Hose was delivered by Amazon very quickly. The box had old shipping paper holders and torn off shipping stickers so right away I figured I had got someone else's return. Fittings for the hose were loose in the box along with the torn open plastic bag that they should have been in. Nothing had been used so I figured I got lucky. Then I noticed the hose end that connects to the shop vac was missing. I assume someone ordered it and kept that part and sent it back. I was going to start a return but decided to message Cen-Tec and give them a chance to correct the issue. Penny with Cen-Tec emailed me back the following morning and got the part right out to me. Great customer service and I will definitely be buying from them again. The hose itself works great. It is very flexible and the anti static feature is awesome. Also love the quick change adapters for different tools in the shop. Great product and customer service!

Scritto da: Roger

Good quality hose but frustrating unavailability of parts and accessories

I wanted to update my hose on my 6.5 HP Shop Vac (see photo). I purchased this understanding that it was for (tool) dust collection but I thought that I could also make it work to use my 1.25 inch Shop Vac accessories. The shop vac end fit perfectly (about 2.25-inch OD). The nut from the old hose is no longer needed and it also will not fit the new hose (nut I.D. is too small - see photo). I spent hours researching a way to add a 1.25-inch end on the quick connect end that's designed for dust collection. I gave up. That's okay. I knew this wasn't really designed for that but it would be a great accessory to just be able to quick-connect the 1.25 nozzle. And then I wouldn't need two (or three) expensive hoses. It just seems that an accessory like that should be available. But... Cen-Tec does offer at least 3 hoses that will work for my Shop Vac and have 1.25 ends (92707, 90342, and 94148) and all 3 were available on Amazon - they just aren't quick connect. So - all I need is the screw-on end from one of those hoses. Surely Cen-Tec must supply those as a spare part. Nope. It would easily thread onto the hose but I couldn't find it anywhere. Not on the Cen-Tec website either. So then I thought okay - I will just get another 2.25 (vacuum end, also referred to as the 2.5-inch end in other Cen-Tec hose descriptions) because my Ryobi Table Saw dust-collection port uses the exact same size as the vacuum end of the hoses. The vac end plugs right into my table saw port - just like it was made for it. The table saw port I.D. is about 2.3". Nope. That's not available either. I researched the Cen-Tec website but that website has less information than Amazon. So I was unable to purchase any accessory - screw-on or click connect in any brand - that would allow me to use this dust collection hose on the dust collection port of my table saw. I didn't really want two expensive hoses but I was willing to keep this one if I could just make it work on my table saw. One thing that is really frustrating is that very few adapters and accessories (Cen-Tec and others) give the outside diameter and/or the inside diameter(s). And it's not just me. I spent hours looking through reviews - trying to find information that I cannot find in item descriptions. And while I was doing that I saw lots of persons that ordered something that did not fit their application. Sometimes if dimensions are listed it doesn't say if it's I.D. or O.D. Or - when it does - it's not clear if they are referring to the accessory or the device that it attaches to. Amazon reviews were helpful for that but I still didn't find anything. Cen-Tec uses different terms for the same item in some cases. Sometimes they refer to the common-size vacuum end as 2.5-inch and in this ad they refer to it as 2.25-inch. The 2.5 description probably comes from the 2.5-inch hose-size if the reducer was not used. I even tried to find a 2.5 inch hose with a 2.5 (2.25) fitting on each end. I couldn't find that either - in any brand. I ordered the Cen-Tec 94148 hose for my shop vac but had to return this hose. I was willing to keep it but just couldn't find a way to make it work as a table saw dust collection hose. I'm sure there is a way to do it but I was not willing to invest any more hours in it. I've probably spent 6 to 8 hours on it already. It just seems silly that I cannot get the 2.25 end on each end of the hose - unless I purchase and additional Cen-Tec hose and remove that end and attach it to the other hose. That seems wasteful and I didn't want to spend $35 for just that end and have to discard the hose. I guess I'll have to drive around to hardware and plumbing stores and try to find a Fernco rubber plumbing adapter that works with some other accessory that I don't have yet - to make it fit my table saw. That was the recommendation of several reviewers. The dimension for the vac end of this hose 2.28" O.D (distal end of fitting). - measured with calipers. It's slightly tapered and an interference fit, and compresses a little bit when you insert it into the standard 2.5 (2.25 I.D.) vacuum port.

Scritto da: I. Gonzalez

Great Antistatic hose, a refreshing change from cheaper factory hoses

Great Antistatic hose, a refreshing change from cheaper factory hoses that attract all kinds of dust or sawdust and then spread it all over. Functions as described and recommend a buy, also cheaper than a brand antistatic hose and works great on my FEIN vac.

Scritto da: TimMan

Nice and long with antistatic

Before I Bought this hose I was continually getting shocked while sanding my woodworking projects. Additionally, I was dragging my shop vac around wherever I needed to sand. With this new longer hose I can put my vac in a central location and just move the hose to the spot that I need to sand. Also I have found that with the grounding built into this cable the static build up has gone away as it is pulled off to ground as the hose lays on the floor. I can’t believe it took me so long to realize they even made a grounded hose AND that it too so long for me to buy it. The hose couplings that came with the hose generally work well. It is still likely you will use any vendor specific fittings that you might have. But the ones that come with the hose aren’t bad. Overall, this set is Highly recommend.

Scritto da: Dog Guy

Good quality shop vac hose

Seems all the shop vacs these days for sale at the retail level have gone super cheap on the hose they provide. They may be great vacuums but the hoses are very poor quality. My last shop vac I literally threw away the hose it came with and kept using the old hose, from my previous shop vac (which was actually my father's shop vac)... so this was a 40 year old hose, it finially gave up. I boutght the Cen-Tech hose as that old hose was failing and I was suctioning large amounts of dust from drywall sanding process. After one sanding session getting static shocks about once every 10 seconds or so I quit for the day and ordered this hose. Works great. The 16 foot length is nice and long without being too long, Hose is super flexible, but plenty strong. Nice set of adapters and the swivel connections are a good feature. The anti-static properties definitely help. I still get the occasional static shock with large jobs but its reduced by about 80 to 90%.

Scritto da: James S.

dust collection must

If you have a power tool that has the capability to capture the dust it makes, this hose comes with adaptors to your vacuum cleaner. I am still trying to attach my dust collector and try it there. Use this with belt sander (Bosch) and domino cutter (Fesstool). Works pretty good.

Scritto da: Spencer

Good quality for a great price

I was worried about the quality of this hose but it looks very durable and the two different ends plus suction control make it a great deal. For Fein vacuums, which I have, the attachment point is a little tight. Fein is standard 2 1/4" ID; this hoses fitting is 2 9/32"-11/32" OD tapered. With a little floor wax it will fit in and stay in snugly. Eventually I'll make a proper adapter using PVC. Anti-static works great too.

Scritto da: Lee M.

No more static shocks !!

Completely solved my static shock problem with my sander attached to my shopvac !! This means I get to do more sanding !! Live it !!