0
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister

Cen-Tec Systems 95237 Quick Click Expanded Multi-Brand Power Tool Adapter Set fir Stëbs Collection, Black Expanded Adapter Set

Brand:Cen-Tec Systems

3.5/5

€
69.23

Cen-Tec Systems 'erweidert Multi-Mark Stroumadapter Set ass konstruéiert fir eng breet Palette vu grousse Power Tool Marken an Ärem Heemgeschäft Vakuum ze verbannen fir d'Erhuelung vum Schutt a Stëbs generéiert während der Benotzung vum Power Tool, fir Iech an Äre Buttek ze halen propper wärend Dir Iech vu Loftpartikelen schützt, déi Är Gesondheet schuede kënnen. D'Adapter sinn entwéckelt fir villsäiteg ze sinn mat de meescht eenzegaartegen an Toolindustrie typesch Verbindungen. Den banneschten Halsband mat haltbaren Acetal Clip verbënnt direkt mat de meeschte Marken vun Trockenmauerschleifer an aner Tools déi grouss Stëbsvolumen generéieren oder grouss Offallprofiler hunn. E Bajonettfitting mat 1 mëllen TPE geformte Fitting ass perfekt fir kleng Kraaftwierkverbindungen. Déi glat 360-Grad Schwenkrotatioun vum Bajonett verhënnert datt de Schlauch vu Kinking oder géint fräi Bewegung vum Kraaftwierk widderstoen. Änneren vun der 1 Fitting op en 1 ½ "Soft TPE Fitting populär op ville Chop Seeën a Router dauert nëmmen eng Sekonn mam Schnell Clip System. Weider Adapter, déi an dësem erweiderten Set abegraff sinn, sinn ¾ "an 1-1 / 4, passend fir zousätzlech Marken vun Tools a Schëlleren. Schlussendlech ass e Loftrelief an de Bajonettfitting entworf fir d'Ajustéierung vum Loftstroum am Tool z'erméiglechen wéi néideg fir Tools ze verhënneren, déi op d'Aarbechtsfläche versiegelen. Déi lescht abegraff Adapter ass en zousätzlechen 2 ½ Standard naass / dréchen Vakuum Adapter an de Schnellverbindungsadapter. Dëst erlaabt eng 2 ½ Manschett am ganze System fir mat Stëbs Sammelen Aarbechtsstatiounen ze schaffen déi dacks mat Dësch Seeën benotzt ginn.

Betrag
An de Weenche leeënKaaf elo

EAN: 0810178032327

Kategorien Tools & Home Verbesserung, Power & Handwierksgeschir,

De mëllen TPE vum Fitting erlaabt de Fitting sech an d'Form vum Auspuffhafen aus dem gewielte Power Tool ze bilden. Adapter Set ass nëmme kompatibel mat 1-1/4 threaded crushproof Schlauch ass net kompatibel mat abegraff Schlag geformt Schlauch datt Standard mat meescht Marken vun Buttek Vakuums Schëffer. Kompatibel mat de folgende Cen-Tec Adapter a Schlauch 94511, 94522, 94434, 95193, 95204, 95215. De Set ass antistatesch, bitt e Schockfräi Ëmfeld fir Buedem Staubsauger a Schlauch. Entworf fir déi meescht grouss Marken vu Kraaftwierksgeschir an Aarbechtskleeder ze passen, dorënner Skill Bosch, Ryobi, Makita, Dewalt, Festool, Fein, Cobalt, Porter Cable, Hitachi, a Milwaukee Electric. Kommt mat Schnellklicksystem fir mat den Auspuffhafen op all gréisser Marken vun handgehalen a stationäre Kraaftwierker ze verbannen. E Halsband mat Clipring a Bajonettfittings mat ¾" 1" 1-1/4" 1-½" Soft TPE Fitting sinn entwéckelt fir Auspuffhäfen ze akzeptéieren an ze halen entworf fir de Schlauch intern oder extern ze passen wéi gefuerdert vum Power Tools Design Changing vun engem Enn passend op den aneren dauert e puer Sekonnen a bitt eng glat 360-Grad Schwenkverbindung fir ze verhënneren datt de Schlauch kinkéiert oder d'Bewegung vum Strouminstrument beschränkt. Erweidert Adapter-Set enthält 3/4 1 1-1/4 1-1/2 Power Tool-Shroud Armature.
Batteries required No
Brand Cen-Tec Systems
Color Black
Country of Origin USA
Customer Reviews 4.5 4.5 out of 5 stars 2,758 ratings 4.5 out of 5 stars
Included Components adapter set
Item Dimensions LxWxH 8 x 6 x 4 inches
Item model number 95237
Item Weight 15.5 ounces
Manufacturer Cen-Tec Systems
Material Thermoplastic Elastomer
Material Thermoplastic Elastomer (TPE)
Product Dimensions 8 x 6 x 4 inches

3.5

13 Review
5 Star
70
4 Star
16
3 Star
7
2 Star
3
1 Star
3

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: Jeff D.
Works great, but if you use this for woodworking buy the antistatic one
I bought this to help me clean out home air ducts and for woodworking dust collection. I did an hour of sanding and the air around the hose is crackling with static electricity. I didn't get shocked, I was just surprised. It didn't seem unsafe, it was uncomfortable. This same brand sells antistatic versions of these hoses. The quick connection is compatible with my Bosch vacuum attachments. There isn't a rubber gasket on the hose end like my Bosch hose so it leaks more vacuum pressure but it works fine for my uses.
Scritto da: Linda
Nice quality
We really like this long hose however in order for it to fit the ends we had to order an extra piece from the company
Scritto da: 2 Logical
Works w/ Makita tracksaw and Rigid vacuum
I didn't include a pic of the hose attached to the tracksaw but other users have shown that. Without batteries Makita's XPS01z and Centec's 16' hose fit in the Makpac XL case with room for other typical small items for tracksaws. i.e. Bench dogs, a square + a couple clamps etc. However, if you can get by with 10' of hose that would make this much easier. The hose is nice and soft but does not like to twist(rotate) so it can whip around a bit when you spin your tools. Since the hose itself is light and supple this hasn't been a problem. So far it's doing its job.
Scritto da: Scotty Gregersen
Perfect fit for Bosch GCM miter saws
I am exceptionally pleased with how this fits up to my miter saw. It's like it was specifically made for it. AND it was cheaper than the Ridgid hose/adapter combo that I was going to use. I had bought multiple adapters and hoses from Home Depot and Lowes to try and find a dust collection solution for my miter saw. The hose side of the dust extractors on the Bosch GCM saws only allow male hose attachments due to the rivet tabs on the outside. I had come up with a couple solutions using an adapter and 2.5inch hose (too bulky and got in the way), or the Ridgid pro-grade 1-7/8" hose (just the slightest bit loose in the saw). I decided to come on Amazon and see if there were better adapters which would work with my 1-1/4" hose I already have. I came across this Cen-Tec hose with multiple adapters and figured I'd give it a try since it was cheaper than the Ridgid pro-grade. I wasn't expecting much, but when I pulled it out of the box and saw the blue ring which was similar to the one on the dust bag I got excited which quickly turned to elation when it fit perfect on the saw. The other end of the hose connects well enough to the duststopper. It will only go in as far as you can see in the photo, but it is tight and won't come out. Update: I tried the two adapters that came with the hose on all the tools I have with dust collection. The following is what the adapters work with, and what they don't. Also, I included measurements of the adapters. Adapter 1: I.D. ≈25.5mm / O.D. ≈35.5mm at end tapers up to ≈ 37mm; ≈ 40mm at raised rib. (see photos) Adapter 2: I.D. ≈ 38mm / O.D. ≈ 48.5mm Tools that at least one of the adapters will work with: Dewalt DWE6423 sander (most likely all Dewalt palm sanders) Dewalt DW6182 plunger router base for the DW618 router. Ridgid random orbit sander Model# R8606B Ridgid palm router Model# R860443B Makita SP6000J plunge saw Tools that these adapters won't work with: Ridgid belt sander Model# R86065B Rigid Jig Saw Model# R8832B Dewalt DWS779 Miter saw (the smaller adapter can be forced in, but only a small portion will fit. You would need to tape it to prevent it from falling out)
Scritto da: CrazyGeorge
Fit exactly as described
Fit exactly as described on Bosch miter saw
Scritto da: Michael C.
Great hose, almost great adapters
The hose itself is great. It looks nice, it is sturdy, and has a nice quick-disconnect clip end. The shop-vac end fit just fine. Neither adapter fit either of my palm sanders, though, which have 35mm exhaust pipes. I should have measured, instead of assuming "industry standard" would work for me. The adapters are also a little bit long and straight, which can be awkward hanging off the back of a sander. (especially if duct-taped to the end of the pipe on the tool) The upside is that the adapters swivel and latch on the hose, so the hose won't pop off, and won't coil up as hand-held tools move around. I 3D printed my own adapters, which turned out really nice. Creating a mating clip-end for the hose is really easy. Open your favorite CAD software, draw a cylinder with diameter 50.5mm and height 28mm, then cut out a cylinder 45.5mm dia / 26mm high, then cut out a horizontal oval cylinder 8.2mm from the opening with dimensions 5.6mm x 10.9mm. (the clips fall into these, to latch) For bonus points, cut the ovals further back for better finger access to release the clip. Then cut a hole 28mm dia in the back wall (air passage) and model the rest of the part that connects to your tool.
Scritto da: Woodhead
You need it, I sure did! Save your lungs from all the fine dust you make.
I really liked that the hose does not shorten-up when the suction end is blocked! I have another (Rockler) stretchable dust hose that trys to shrink way up when the nozzle is blocked (even if only for a moment) - it pulls the tool out of position and knocks anything in its way over. This does not shrink or whip around. On the other hand, since this hose does not shrink-up, it takes more space to store (well worth it for me). The quick detach ends work well, making it easy to switch from tool to tool - if you leave the rubber adapter ends on your tools. I also bought the optional set of more rubber adapter ends - this gives me all the sizes I need for all my tools. I’m really glad I bought it! I used it on my belt sander, 3 orbital Sanders, a drill press and a track saw. I would like to find some plain nozzles for general cleanup too
Scritto da: Brad
A little cheap but it works
It's a little cheap in build but it works fine.
Scritto da: Don or Betty
Vacuum hose
Well built vacuum hose, works perfect on my hand sander
Scritto da: Robin
Great Suction
I was surprised to find that upgrading my hose made such a difference in the functionality of my shop vac. This is a great hose. Like other reviewers, the fittings don't fit all of the tools in my shop but that is to be expected with every brand having their own proprietary fittings. I am very pleased with this purchase. And I would buy it again.
Scritto da: spinedr
Flexible material
Love the flexibility when cleaning my 20 foot dryer vent.
Scritto da: Amazon Customer
Streamlined dust extraction and cleaning
I'm the type to avoid setting up the shop vac because I don't want to put the effort in. Bought a couple sets of these so all my tools are 1 click to set up, and my 30-foot vacuum hose is now 1x 10 and 1x 20 feet so I'm not wrestling with coiling and uncoiling it all the time. Swivel action is a lifesaver here!!
Scritto da: Ryan
Required some modifications
I bought this to connect my existing ridgid vac setup to my new makita track saw. One of the included connectors fit the saw just fine but the included vacuum hose end did not fit the ridgid hose at all and all the connectors are useless without it. In the end I tried pulling just the runner piece off the connector that fit the saw, and the other end just happened to fit my existing hose end. I was going to initiate a return but it worked out in the end.

Zesummenhang Produiten

hot
Leeschtung Tool W3939 Hammer Tough 2-1/2 Drill Press Vise
3.3/5

€ 59.34

Leeschtung Tool W3939 Hammer Tough 2-1/2 Drill Press Vise
3.3/5

€ 59.34

hot
DEWALT DNP617 Centering Cone fir Fixed Base Compact Router, Sëlwer
3.7/5

€ 36.33

DEWALT DNP617 Centering Cone fir Fixed Base Compact Router, Sëlwer
3.7/5

€ 36.33

hot
IVY Classic 01546 Nr.
3.2/5

€ 19.29

IVY Classic 01546 Nr.
3.2/5

€ 19.29

hot
Mishimoto MMTL-HCR-9 Schlauchklemmtang Set, 9 Stéck, Schwaarz
2.9/5

€ 91.06

Mishimoto MMTL-HCR-9 Schlauchklemmtang Set, 9 Stéck, Schwaarz
2.9/5

€ 91.06

hot
PSI Woodworking CSC3000C Barracuda Wood Dréibänk Key Chuck System
3.7/5

€ 340.13

PSI Woodworking CSC3000C Barracuda Wood Dréibänk Key Chuck System
3.7/5

€ 340.13

hot
Bon Tool 11-858 Tuckpoint Trowel - Rad 1/2 Holz Handle
0.1/5

€ 35.33

Bon Tool 11-858 Tuckpoint Trowel - Rad 1/2 Holz Handle
0.1/5

€ 35.33

hot
Dremel 121 Rotary Tool Accessories Carving Bit - Perfekt fir Holz, Plastik a Soft Metaller
3.6/5

€ 25.64

Dremel 121 Rotary Tool Accessories Carving Bit - Perfekt fir Holz, Plastik a Soft Metaller
3.6/5

€ 25.64

hot
DE-STA-CO 810174 Hall Effekt Schalter
0.1/5

€ 25.54

DE-STA-CO 810174 Hall Effekt Schalter
0.1/5

€ 25.54

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen

Kategorien

All d'Kategorien
Menu Kategorien Noper Weenchen

Menu