Cordinate Cord-Wrap Duplex Wallplate with Device Regal, Outlet Regal, Cord Winder, Cord Holder, Kitchen Appliance Cord Winder, Cord Organizer Fir Apparater, Outlet Covers, White, 2pk, 58301 2 Pack Duplex Device Regal

Name: Cordinate Cord-Wrap Duplex Wallplate with Device Regal, Outlet Regal, Cord Winder, Cord Holder, Kitchen Appliance Cord Winder, Cord Organizer Fir Apparater, Outlet Covers, White, 2pk, 58301 2 Pack Duplex Device Regal
Brand: Cordinate
SKU: 0030878583015
Price: 47.24 EUR
Availability: InStock

Brand:Cordinate

3.5/5

€
47.24

Organiséiert Äert Heem, Büro oder Ënnerhalungszenter mat der Cordinate™ Cord-Wrap Duplex Wallplate mat Geräterregal. De wäisse Finish vun dëser Wandplack passt perfekt op déi entspriechend Outlets fir e glatten a professionnelle Look fir Ären Interieur ze kreéieren. Dës Wandplacke sinn de perfekte Finishing Touch fir Neibau oder en einfache Wee fir en existente Outlet opzebauen oder ze reparéieren. De Cord-Wrap Design huet en eenzegaartegt integréierte Kabelmanagementsystem fir Schnouer a Kabelen ordentlech gebündelt ze halen. Dir kënnt och Ären mobilen Apparat op de prakteschen, eraushuelbare Regal setzen wärend et gelueden ass. Dës userfrëndlech, intuitiv entworf Duplex Behälter Wandplack mécht en direkten Impakt op Ären Heemdekor. Gebaut no den héchste Standarde vu Sécherheet a Leeschtung, dës Wandplack ass kompatibel mat de meeschte Duplex Outlets. All Wandplack gëtt vun enger ETL Oplëschtung ënnerstëtzt, déi laangfristeg Notzung an Haltbarkeet garantéiert. Montage Hardware ass abegraff fir d'Installatioun eng Loft ze maachen. Heiansdo kann déi klengst Investitioun de gréissten Impakt op Är Immobilie maachen. Upgrade haut op d'Cordinate Cord-Wrap Duplex Wallplate mat Apparat Regal.

Keng Unitéiten verfügbar

EAN: 0030878583015

Kategorien Elektronik, Accessoiren & Ëmgeréits, Cord Management, Kabel Raceways,

PEACE OF MIND - Gebaut no den héchste Standarde vu Sécherheet a Leeschtung, ënnerstëtzt vun enger ETL Oplëschtung a kompatibel mat de meeschte Duplex Wandoutlets. EINFACH DIY PROJECT - Enthält Schrauwen fir op entspriechend Wandbehälter ze montéieren, perfekt fir do-et-selwer Projeten Renovatiounen oder Reparaturen. STANDARD WHITE - De wäisse Finish passt op existente Schalter oder Outlets a passt gutt an den Interieur. DEVICE SHELF - Plaz Äre Smartphone oder en aneren mobilen Apparat am agebaute Regal wärend et gelueden ass. CABLE MANAGEMENT - De Cord-Wrap Kabelmanagement System erlaabt Schnouer a Kabelen ordentlech ronderëm den Duplex Behälter Wandplack gebündelt ze ginn.

Batteries Required?	‎No
Brand	Cordinate
Brand	‎Cordinate
Color	White
Color	‎White
Configuration	‎Double
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 23 ratings 4.5 out of 5 stars
Finish	‎White Finish
Finish Type	White Finish
Finish Type	‎White Finish
Included Components	‎Wall plate
Installation Method	‎Screw In
Item Dimensions LxWxH	2.55 x 5.05 x 7.5 inches
Item Dimensions LxWxH	‎2.55 x 5.05 x 7.5 inches
Item model number	‎58301
Item Package Quantity	‎1
Item Weight	‎3.7 pounds
Manufacturer	‎JASCO Products Company
Part Number	‎58301
Product Dimensions	‎2.55 x 5.05 x 7.5 inches
Size	‎2 Pack
Style	‎Duplex Device Shelf
Switch Style	Decorator, Toggle
Switch Style	‎Decorator, Toggle

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Dana~

Be careful with extra large charging adapters!

Well, if you can turn your brick of a charger upside down, this will work for cable/cord management. Otherwise you'll end up covering both outlets. Thankfully, I was able to do so, so no wasted outlets. A better future design might have a "cut out" for charging adapters that are larger than usual. If you don't need both outlets, great. If you need both, you might want to look elsewhere.

Scritto da: Amazon Customer

Great idea.

I have a floor lamp that sits close to a column most of the time. Need to move it behind the nearby sofa on some occasions. The cord wrap option allows me to keep the cord out of the way. No tripping hazard when by the column and easy to deploy when needed by the sofa. Excellent!

Scritto da: Sage B

Very nice

This is a brilliant idea. Cleans up cords and keeps them with the plug. Great idea, great execution.

Scritto da: 4Home@Home

Nice way to organize wires but large charging adapters don't fit after putting these!

This wall plate with grooving to wrap the wires is a nice idea. Comes in a nice packaging too and great build quality. This is useful for many situation to organize wires next to the plug. Fits well on my wall outlets and was very easy to install them. These are very reasonably priced too and I would recommend this product. However, only complain I have is that this plate limits the use of large sized adapters as the protruding grooving blocks them.

Scritto da: Kindle Customer

WORKS, BUT NOT THE MOST ATTRACTIVE

This works as expected, but It's best for less visible areas. Unless the plate, cird, and walls are all the same color it doesn't look very good or neat.

Scritto da: HelpfulRealist

Does what it says it will do

I wanted it for the bathroom to wrap up the cat fountain cord but found it couldn't fit at the outlet which needed a top and bottom screw (this only has a middle). I tried the other bathroom outlet and found it was too close to the medicine cabinet to allow for winding around it. Bummer! I looked through the house to see if it could be useful anywhere else and chose the kitchen. It is really large in hand (the picture really doesn't give a sense of the size) and I was worried about it being gaudy once screwed in but it looks totally normal on the wall. Nice touch: they included two screws (for use and a spare), both with white painted tops to make a solid white front plate. That's what pushed it from a four to five star for me. Once I realized it only had a single screw, I wondered if it might wobble but it is in securely and I have no concerns about its long-term use. The toaster cord wrapped nicely and the Instant Pot can fit on top of it when in use. I would definitely buy one again, just making sure it could fit in the outlet I intended to use it on.

Scritto da: KAT

What a novel idea!

With charger cords, lamps and clocks covering any given occasional table, this is a perfect way to keep pesky cords out of the way and tidy up an area. Came with screws, simple installment, what's not to like? Use caution when removing old plates, it's easy to get zapped if you don't shut off the juice and get careless with a screwdriver. I found a great way to change the plain white to one with colors using pourable acrylic paints. Fun albeit messy way to add some personal "wall art" around your receptacles.

Scritto da: Brett

A good idea, but only works in certain circumstances

Overall, this product is a good idea and, in the right circumstances, can work just fine. But those circumstances are far more specific than you think. The ideal use case for this wall plate is a white, two plug outlet with a single central screw (sort of the US “basic” plug, not the decor models) that is in a single gang box (not next to any other plugs or switches) and where the box is relatively far from corners/windows/etc. If that’s not the case for you - you have 2 screw decor plugs, a multi-gang box or a box that is close to a window/corner/door or something else then it won’t work. Even if you have generally the right use case from a plug perspective, you also have to have the right use case from a cord standpoint. Once you install this, you can no longer use most “flush” mounted plugs or right angle plugs, nightlights, or AC adapters on the particular outlet in question as they won’t fit - it functionally recesses the plug behind the cord winding edges. Speaking of those edges, you’ll also need a cord that can wrap on a 0.62” ledge - so thicker cords like those with many common modern electronics won’t fit. Probably the ideal usage from a cord perspective is a lamp cord as they tend to be “flat” and thinner - and are not typically large “wall warts”. It’s also possible USB cords/chargers could work, but that would depend on how big the wall portion is. So if you have the right use case - say, a mid-wall plug behind a table with a lamp - this would be a great way to wind up the extra cabling. But those use cases seem so few and far between that I wouldn’t think the market for this would be very big - and even those use cases could likely be supplanted by a cable tie. But, it’s inexpensive and (fairly) easy to install if you’re handy with a screwdriver, so it could be worth a try.