CURT 45007 Trailer Hitch Ball Mount Zong Hülse, Passt 2-1/2 Zoll Zong Breet, 1 Zoll Lach

Name: CURT 45007 Trailer Hitch Ball Mount Zong Hülse, Passt 2-1/2 Zoll Zong Breet, 1 Zoll Lach
Brand: CURT
SKU: 0612314450077
Price: 42.36 EUR
Availability: InStock

Brand:CURT

3.3/5

€
42.36

CURT bitt e puer verschidden Zorte vu Kugelmontage, vum Standarddesign bis schwéier-Pflicht op eis Spezialitéit Kugelmontéiert. Fir all Zort bidde mir Optiounen fir Shank Gréisst, Längt, Drop, Rise a méi. Mee do stoppen mir net. D'CURT Ball Mount Accessoire Linn ass eng virsiichteg Sammlung vu spezielle Produkter déi entwéckelt sinn fir d'Funktioun vun Ärem Ball Mount ze ergänzen an ze verbesseren. Installéieren an Dréimoment engem Trailer Ball op Är Ball Mount kann e groussen Nodeel ginn, wann Dir sicht op Är Rees ze kréien. Amplaz ze probéieren zwee Schlësselen gläichzäiteg ze handhaben an den Trailerkugel op der Plaz ze halen, während Dir et festgehalen hutt, mécht d'CURT Ball Mount Zong Hülse Saachen méi einfach. D'Kugelmontage Zonghülse erlaabt d'Single-Wrench Spannung an Dréimoment vun engem Trailerkugel. Dëse Ball Mount Installatioun Accessoire passt einfach iwwer d'Montageplattform vun Ärem Kugelmontage an akzeptéiert en Trailerkugel, hält se op der Plaz an hält se aus ze dréinen wéi Dir d'Mutter festhält. Loosst de Ball Mount einfach d'Aarbecht maachen! D'CURT Kugelmontage Zonghülse ass fir 2 Kugelmontage mat 2-1/2 Kugelmontéiert Zong entworf a passt nëmmen op Schlësselflaach Trailerbäll.

Betrag

An de Weenche leeën Kaaf elo

EAN: 0612314450077

Kategorien Automotive, Aussen- Accessoiren, Ofschleefdéngscht Produkter & Winches, Ball Mounts,

Einfach ze installéieren. Fir en Trailerkugel mat dëser Kugelmontagehülse z'installéieren, setzt se einfach iwwer d'Zong vum Kugelmontage. Da setzt den Trailerkugel an d'1-Zoll Kugelloch. CORROSION-RESISTENT. Fir laang dauerhafte Schutz géint d'Elementer, kënnt dësen Hitch Ball Accessoire mat engem haltbare schwaarze Pulverlackfinish. STANDARD FIT. Dës Kugelmontage Zonghülse ass fäeg fir quasi all Trailer Hitch Ball Mount mat enger 2-1/2 Zoll breet Zong ze passen. VILLSÄITEG. Dëse Kugelmontage-Installatiounstool passt op déi meescht CURT Trailerbäll, wéi och aner Schlësselflaach Seelbäll. EEN-WRENCH SCHLECHT. Dësen Trailer Kugel Installatioun Accessoire erlaabt Iech en Trailer Kugel op engem Kugelmontage ze installéieren an ze dréinen andeems Dir just ee Schlëssel benotzt - net méi fumbling mat zwee Schlësselen!

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.2 4.2 out of 5 stars 62 ratings 4.2 out of 5 stars
Exterior	‎Painted
Finish Type	GLOSS BLACK POWDER COAT
Is Discontinued By Manufacturer	‎No
Item model number	‎45007
Item Weight	0.58 Pounds
Item Weight	‎9.3 ounces
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎45007
Model	‎Ball Mount Sleeve
OEM Part Number	‎BKDK45007
Product Dimensions	‎8 x 7 x 5 inches
Vehicle Service Type	Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: .

Not compatible with Curt Switch Ball Set (42225) shank

I purchased this for use with the Curt Switch Ball Set (42225) so that I could torque the shank without counterholding it with a wrench. Unfortunately, it doesn't fit, as it's meant for smaller wrench flats, seemingly 1-5/8". This information about the product should be included. It does appear to fit the tongue of a Curt 2" drawbar (45030) well, and is also said to be compatible with those having a locating pin.

Scritto da: Leonard

Looks like a good idea

Didn't fit because my drawbar was too wide. That's my fault for not checking.

Scritto da: Gus

Good fit on hitch

Sold with trailer build materials before I had a chance to use it.

Scritto da: Christopher T Barbour

Wish I had bought this sooner

I purchased this with the Curt 24178 1" shank switch ball set and Curt 45901 channel style adjustable ball mount. I had been having a problem with the ball shank spinning while trying to tighten the nut. This tongue sleeve solved the problem perfectly. This sleeve eliminates the need to carry two wrenches to flip the ball around on the mount. It's also cheaper than buying a 2nd wrench. I had no issues using this sleeve with those parts, unlike what other reviews suggested. Installing the sleeve spaces the ball up slightly, but the shank of my ball still had enough room to install a cotter pin for a bit of extra security. Minor complaints: The grove is wider than the base of my ball. Doesn't affect the functionality any, but it might provide a spot for grime to pool.

Scritto da: NJ.W

Well.....

I purchased and returned this item for two reasons. 1. This item will not allow the Curt Switch Ball with 1" shank to fit in its grove to be tightened. 2. I have always been impressed with look of Curt products....However, When I received this item, they were many manufacturing blemishies in the metal. (small nicks, cuts,) I know this was a manufacturing issue b/c the nicks and cuts were still painted in there groves. I could overlook the nicks and cuts, but they need to update the description about what actually fits as far as the ball itself.

Scritto da: Papa RC

It does not look nice but odds

I got this for a new CURT 45000 Class 2 Ball Mount. I contacted Curt directly if this would fit since it stated was for larger mounts. It did fit but was really little too big in my option but was able to make it work. It does not look nice but odds. See pictures .

Scritto da: cowboy7381

Great option to make taking the ball hitch on and off very easy.

Makes putting the ball on and off much easier. Now I can do it when it's on the vehicle instead of taking it off and putting it in a vice or trying to find the right tools for both sides.

Scritto da: waltbobjr

Now You Only Need One Wrench When Installing the Ball

Bought to use with CURT 45090 Hitch and Curt 40002 and 40004 Balls. Worked perfectly. The flats keep the ball from rotating as the hitch does not have any recess/tab to keep ball captive. Without the 45007 you will need two wrenches. Used on the 45090 in the "rise" position. Picked up the Curt 20001 ball wrench to make the tightening job straightforward and simple.

Scritto da: dido

dididodido

It is much needed as most hitches are pre-installed as a drop. But I needed a rise and they are not commonly found. This in combination with the Curt ball mount will allow for quick and secure installation of the hitch ball. Put your full body into tightening and that will be enough for it to be torque to the right amount.

Scritto da: Frederic Bergeron

Five Stars

Great.