Danco 10062 Universal Bumper, fir Gebrauch mat Toilette Sëtzer, Gummi, 1 Pak, wäiss

Name: Danco 10062 Universal Bumper, fir Gebrauch mat Toilette Sëtzer, Gummi, 1 Pak, wäiss
Brand: Danco
SKU: 082901273509
Price: 21.40 EUR
Availability: InStock

Brand:Danco

2.8/5

€
21.40

PRODUITBESCHREIWUNG Dës Stick op Toilette Sëtz Bumpers bidden eng einfach Alternativ fir e ganzen Toilette Sëtz ze ersetzen. Abegraff sinn (2) Ronn Toilette Sëtz Bumpers an (2) länglëche Toilette Sëtz Bumpers. Si hunn eng robust Gummikonstruktioun déi Kraaft an Haltbarkeet ubitt, déi hëllefen Äert Toilette Sëtz ze schützen an ze schützen. Dës Bumper Ersatzpads kënnen d'Toilettesitzdeckel Snap-In, Schrauwen an Tack Bumpers ersetzen. Dës universell Toilette Sëtz Bumpers schaffen mat de meeschte Marken a Modeller vun Toilette Sëtzer, awer funktionnéiert am Beschten mat enger Toilette Sëtz déi eng glat Uewerfläch huet. Dës Ersatzstécker si perfekt fir Är Toilette Sëtz Reparatur. Bestellt Är haut! VUM Produzent Danco ass ee vun de gréisste Sanitär Reparatur, Ersatz an Remodel Fournisseuren an der Heemverbesserungsindustrie. Mir konzentréieren eis haaptsächlech op d'Ermächtegung vun Do It Yourself Konsumenten mat bezuelbare Sanitärprodukter a Léisungen déi nei an erfrëschend Dekore fir Buedzëmmer a Kichen kreéieren.

Betrag

An de Weenche leeën Kaaf elo

EAN: 082901273509

Kategorien Tools & Home Verbesserung, Kichen a Bad Ariichtungen, Buedzëmmer Ariichtungen, Toiletten & Toiletten Deeler, Toilette Sëtzer,

Einfach ze installéieren. Enthält 2 Sëtz Bumpers. Befestegt op Toilette Sëtz mat personaliséierte Klebstoffpads. Passt op all Mark a Modell vun Toilette Sëtz. Benotzt fir Toilette Sëtz Reparatur. EINFACH ZE BENOTZEN: Botzen d'Toilettesitzringen grëndlech an haalt se propper an dréchen, schielen de selbstklebend Réck op den Toilette Sëtz Bumper of a setzt se op d'Toilettesitzringen, dréckt schwéier fir sécher ze stellen datt et fest festhält (net benotzen fir 10 Minutten no der Installatioun). UNIVERSAL DESIGN: Universal Design fir déi meescht Marken a Modeller vun Toilette Sëtzer ze passen (schafft am beschten mat engem Toilette Sëtz deen eng glat Uewerfläch huet). INKLUDERT: (2) Ronn Toilette Sëtz Bumpers (2-1/4 Zoll laang an 3/4 Zoll breet mat enger Dicke/Héicht vun 1/2 Zoll) an (2) länglëg Bumper Toilette Sëtz Bumpers (3/4 Zoll baussenzegen Duerchmiesser) mat enger Dicke / Héicht vun 1/2 Zoll). EXTRA CUSHIONING: Ersetzt Snap-in, Schrauber- an Tack-on Typ Toilette Sëtz Bumpers an de Stick op Gummi Konstruktioun mat wäissem Finish vermëscht mat de meescht existent Toiletten a Buedzëmmer Ariichtungen. CUSTOM-FIT ADHESIVE PADS: Befestegt un d'Toilettesitz mat haltbaren personaliséierte Klebstoffpads, déi hëllefen Ären Toilette Sëtz ze schützen an ze schützen.

Assembled Diameter	‎1 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Danco
Color	White
Color	‎White
Country of Origin	‎China
Customer Reviews	3.8 3.8 out of 5 stars 4,773 ratings 3.8 out of 5 stars
Cutting Diameter	‎1 Inches
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Rough Plumbing;Parts and Repair;toilet-repair-kits
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	2.97 x 0.59 inches
Item model number	‎10062
Item Package Quantity	‎1
Item Weight	0.08 Pounds
Item Weight	‎1.28 ounces
Manufacturer	‎Danco, Inc.
Material	Rubber
Material	‎Rubber
Measurement System	‎Inch
Part Number	‎10062
Shape	‎Round
Size	‎1 Pack
Style	‎Modern
Warranty Description	‎Limited 1 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Linda J

Does the job!

They are working well on my very old (and blue Koehler) toilet seat. I opted to use a different adhesive instead of what came in the package, and they are holding up well. My suggestion to the manufacturer would be to include a small tube of E6000 adhesive, which does a great job.

Scritto da: Janet Prendergast

Don't last long

I had an old (about 30 yrs) wooden toilet seat and the original bumpers were cracking and falling off. The seat was in good shape and it's hard to find the good wooden ones anymore. So I saw these and figure this was the solution. Within a week they started falling off. One landed up getting flushed. I even tried to Gorilla Glue them on but that too failed. Maybe they will work better on the plastic seats but it didn't' hold on the wooden seat. I landed up replacing the seat with a plastic one.

Scritto da: Caroline Moniz

Works well

Way better then plastic bumpers that crack. These are of very good quality.

Scritto da: Tom

Just what I needed

My hard plastic toilet seat bumpers had cracked and come apart. These were just what I needed. After a couple of months they are holding up well. Very happy with them.

Scritto da: Vince Prybeck

Easy to install and work well, if they stay glued.

Easy to install, but they may fall off after a few months requiring glue to re-install afterwards. I've already done 2 of the 4 I got, but they stay after they are re-glued so far.

Scritto da: Kathleen

Not white

Says white....not, it is an off white.

Scritto da: adumas18

Doesn't stick

The tape it comes with does not stick at all to the toilet lid or even the product itself. I had to use wall hanging double sided tape I had to get these to stick. The actual product is sturdy but the tape is useless.

Scritto da: Just Joe

Did not use. Too small to match previous bumpers.

Not used.

Scritto da: Luc Labelle

They work great but, could have better adhesion from 3M.

They work great but, they could have better adhesion from the 3M double sided tape that comes with it . I had a hard time making it stick and finally they did when I installed them under the seat and sat down on it to apply pressure on them and they finally glued on correctly and are still holding great . I would have preferred screwed on than these but, the rubbers are of really good quality , it's just the double sided tape for me that's not quite the right one for the job , I think . I'm used to double sided tape for car moldings and it sticks a lot more than these ones but like I said , they did the job . Thank you .

Scritto da: Patrick

Only diamonds are forever, not these toilet seat bumpers.

Got these bumpers so that it would fill the gap between my toilet seat and rim caused by bidet installation. They really did not last long at all. They stick on for a bit then you find later they have fallen in the toilet. They don' t stay where they are supposed to. Perhaps its because I did not use crazy glue on them like some other people have suggested. Or even use crazy clue then hold in place with binder clips over night. This could help. At first I had them on the underside of the toilet seat itself. This seemed to work for a while then they would fall off. Eventually I tried sticking them to the toilet so that my weight would constantly keep them sticky and in place. I'm not sure how but they still somehow end up falling out into your toilet at some point. I would definitely agree that the stickiness that comes with these is not a long lasting method. The other side of the coin is that they are in kind of a dirty area. Eventually they are going to get dirty and you are going to want to replace them anyway. Just a thought.

Scritto da: Amazon Customer

Don't stick

These bumpers would be great but the glue pads just do not stick. The first one fell off in less than a week and after three weeks they are all gone. This was after carefully cleaning both surfaces. Won't buy these again as I literally flushed my money down the toilet.

Scritto da: Dale

Satisfied

I was unable to locate the exact size I needed (3/8”) for my toilet seat bumpers anywhere, so had to shave these half inch ones down to work correctly. They work perfectly now.