Enbrighten Z-Wave Plus Light Dimmer mat QuickFit & SimpleWire, kompatibel mat Alexa, Google Assistant, Zwave Hub erfuerderlech, Repeater / Range Extender, 3-Way, White & Light Mandel, Smart Switch, 52252 700S Paddle Dimmer White & Light Mandel

Name: Enbrighten Z-Wave Plus Light Dimmer mat QuickFit & SimpleWire, kompatibel mat Alexa, Google Assistant, Zwave Hub erfuerderlech, Repeater / Range Extender, 3-Way, White & Light Mandel, Smart Switch, 52252 700S Paddle Dimmer White & Light Mandel
Brand: Enbrighten
SKU: 0030878522526
Price: 99.44 EUR
Availability: InStock

Brand:Enbrighten

3.5/5

€
99.44

Erhéije Är Automatisatiounsoptioune mam Enbrighten Z-Wave No-Neutral Smart Dimmer mat QuickFit an SimpleWire. Wann mat engem kompatiblen Hub gepaart, bedreift den hardwired Smart Dimmer Mauer, Plafong an Akzentbeleuchtung duerch individuell Kommandoen a programméiert Astellungen ouni en neutralen Drot ze erfuerderen. Wireless Kontrollen a plangen Indoor oder Outdoor Ariichtungen fir ouni Ustrengung vun Ärem Heem. Automatisatiounsméiglechkeeten si scheinbar onendlech wann se mat Hubs vu Ring, Wink, SmartThings, HomeSeer, Vera, Nexia a méi verbonne sinn.

Betrag

An de Weenche leeën Kaaf elo

EAN: 0030878522526

Kategorien Tools & Home Verbesserung, Elektresch, Schalter & Dimmer, Wandschalter, Dimmer Schalter,

Range Extender - Den Z-Wave Dimmer widderhëlt d'Signal vun Ärem Hub oder engem aneren Z-Wave Apparat fir de drahtlose Range bis zu 150ft ze verlängeren. Multi-Switch kompatibel - De Smart Apparat funktionnéiert perfekt eleng oder integréiert nahtlos a Multi-Switch Setups wann se mat bis zu véier kompatiblen Add-on Schalter gepaart ginn (Modell 46199). Verännerbar Paddelen - Wäiss a liicht Mandel Rocker-Stil Paddelen sinn abegraff fir Är existent Schalter ze passen. Schwaarz, brong an Elfebeen Optiounen sinn och verfügbar. Schalter Upgrade - Einfach all Standard In-Wall Schalter ersetzen fir ON / OFF op afstand ze schalten, d'Hellegkeet vun der Beliichtung unzepassen an Zäitplang fir eng breet Palette vun Armaturen ze kreéieren. Stëmmkontrolle - Genéisst d'Bequemlechkeet vun der Stëmmkontrolle mam Google Assistant oder Amazon Alexa wann Dir mat engem kompatiblen Z-Wave Hub verbonne sidd. SimpleWire - Patentéiert Auto-Detektiounslinn / Lastterminaler ënnerstëtzen eng séier Installatioun andeems d'Linn- a Laaschtleitungen identifizéiert ginn an den Dimmer deementspriechend konfiguréieren. Dual, Offset Buedemhäfen vermeiden Schaltkëschtmontageschrauwen an ënnerstëtzen Daisy-Chaining a Multi-Switch Setups. QuickFit - Verbesserte Komponenten reduzéiert d'Hausdéift mat bis zu 20% am Verglach zu fréiere Z-Wave Modeller an eliminéiert d'Bedierfnes fir Hëtzttabs. QuickFit Verbesserunge sinn déi ideal Smart Léisung fir eelere Stil Schaltboxen, Multi-Gang Konfiguratiounen oder all aner Applikatioun mat limitéierter Plaz. Revolutionär, patent-pendend Design - QuickFit an SimpleWire Technologien bidden banebriechend Heemautomatiséierungsfunktiounen. Eenzegaarteg Fortschrëtter maachen déi intelligent Kontrollen méi einfach ze installéieren a méi zouverlässeg wéi jee. Nee-neutral Dimmung - Zertifizéiert fir richteg mat enger gerénger Minimum Watt ze funktionéieren - sou niddereg wéi 2W getest - den Dimmer kontrolléiert déi meescht Armaturen komplett ouni en neutralen Drot ze erfuerderen. D'Ajustéierung vun der Hellegkeet vun dimmbaren LEDs an CFLs souwéi Glühwäin an Halogen Luuchten vun 0-100% reduzéiert d'Energiekäschte a verbessert d'Liewe vun der Glühbir.

Batteries Required?	‎No
Brand	Enbrighten
Brand	‎Enbrighten
Circuit Type	3-way
Circuit Type	‎3-way
Color	‎White & Light Almond
Connectivity Protocol	‎Z-Wave
Control Method	Voice
Control Method	‎Voice
Controller Type	nexia, Google Assistant, vera, Amazon Alexa, SmartThings
Controller Type	‎nexia, Google Assistant, vera, Amazon Alexa, SmartThings
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 1,087 ratings 4.4 out of 5 stars
Included Components	‎Smart Dimmer
International Protection Rating	IP54
International Protection Rating	‎IP54
Item Dimensions LxWxH	2.6 x 3.1 x 6.1 inches
Item Dimensions LxWxH	‎2.6 x 3.1 x 6.1 inches
Item model number	‎52252
Item Package Quantity	‎1
Item Weight	‎6.1 ounces
Manufacturer	‎Jasco Products Company, LLC
Mounting Type	Wall Mount
Mounting Type	‎Wall Mount
Number of Items	‎1
Operating Voltage	120 Volts
Operating Voltage	‎120 Volts
Operation Mode	ON-OFF-ON
Operation Mode	‎ON-OFF-ON
Part Number	‎52252
Power Source	‎Ac/Dc
Product Dimensions	‎2.6 x 3.1 x 6.1 inches
Style	‎700S Paddle Dimmer
Switch Style	Rocker
Switch Style	‎Rocker
Unit Count	‎1.0 Count
Usage	‎Dimming LED Lights, Dimming Incandescent Lights, Dimming CFL Lights, Control and Schedule Wall and Ceiling Lights, Dimming Halogen Lights
Warranty Description	‎5-Year Limited Warranty
Wattage	‎2 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Lars Inge Bremnes

Easy to install , flawless functionality

Have installed 50+ of these switches in various configurations throughout my house , all work great . Not sure why the non neutral is so much more expensive , but great that it’s an option where needed . Love z wave

Scritto da: N. Lee

If you want the smart home aspect, find another brand

UPDATE: So while these don't sync up to Alexa the way I wanted, they do function as desired. Really, the problem is with Amazon/Alexa. I can't even really explain what's going on with it because it's so confusing. In summary, in my office there is a Dot that is "assigned" to my Amazon "account". In my account I had to add Alarm.com as a skill. Since I did, I can be in my office and tell Alexa to turn on the Kitchen light. But if I'm in the kitchen, where the kitchen Alexa Show is - which is connected to my wife's "account", who has NOT added Alarm.com as a skill, if I say Alexa turn on the Kitchen light, she says it doesn't have that functionality. We're on a household Amazon account, but for some reason, not everything gets shared. Every other light I have of these enbrighten, works with Alexa, except the 4-way switch in the kitchen, which ONLY works with MY account - assuming because my wife has not yet added Alarm.com as a skill. You see, it's just unnecessarily convoluted. I need to just get my wife to add the skill and see if that fixes it. Just a heads up though, if you do have multiple Alexa devices, make sure they're all on the same account, and take care of the setup all on the same account. I'm knees deep in these switches, since I ordered and installed probably 6 of them - from motion sensor lights to dimmers and even a 4-way dimmer switch. They plug into your existing wiring pretty easily and they function manually just fine. It's the app and smart home capabilities, like trying to connect it to Alexa that are horrible. You'll find yourself in a loop of confusion. If you go to the Alexa app and try to add the light as a device, it'll tell you to get the enbrighten app and first add it there. However, the enbrighten app can't find any devices. It'll tell you to put the switch in discovery mode, but doesn't tell you how to do that. When you sift through pages that supposedly try to tell you how to turn discovery mode on, it describes a method that doesn't exist. Specifically, for dimmer switches, It says to take the cover off and press the program button for 5 seconds. Well, there isn't a program button, it does not exist. So there's no way to make it discoverable, therefore it can't connect with the enbrighten app and of course, it can't connect to Alexa. The whole point of why I got these were to be able to control lights by voice, and that's not working. I called enbrighten tech's support and it went to voicemail saying that EVERYONE is apparently in a team meeting...I kid you not. Stay away from these. Buy another brand and check to see if there are youtube videos of people installing them and running them on Alexa. There's not a whole lot of enbrighten info out there and I think this is why.

Scritto da: Zaq Thompson

New firmware may cause your lights to flicker

These are fantastic switches. You can hold up or down to dim. If you run into a wicked flickering issue I'd reccomend downgrading the firmware from the jasco github. Do this before getting any kind of load resistors. They typically don't help unless you got like a single .5w load.

Scritto da: CG

Died after 8 months :(

I bought 4 of these. They worked fine with my dimmable LEDs and with SmartThings. However one of the four just died after 8 months of use, so not too happy about that.

Scritto da: Allan

Works great with SmartThings. Wiring is eay too

Needed to add a smart controlled light recently and went with this model as I already have multiple GE/Embrighten Z-Wave switches from the old standard Z-Wave to the newer Z-Wave plus. This is one of the newest models and they have definitely made improvements. As far as installation goes the switch is physically smaller then the older models which makes it easier to fit into the electric box. Plus you can now swap the hot and load wires and it figures it out. I didn't as I knew which was which but that would be real handy if you didn't know as you wouldn't have to trace out wires. Plus it was discovered by SmartThings with no issues on the first try. Overall great product.

Scritto da: Lola

Had to battle it out - Samsung Smart Things tech support VS Enbrighten tech support

I have about 40 or 50 GE smart switches in my house over the last 4 to 5 years so I’m very accustomed to installing and configuring these. So imagine my surprise when I order the newest model from Enbrighten it doesn’t work with the Samsung smart things - Even though it absolutely says that is supported on its box and marketing materials. So after making six or seven individuals support calls to both tech-support team I finally put three of us on a conference call. It was absolutely ridiculous to hear each company pointing the finger at each other. Regardless to make a very long and frustrating story short I was very disappointed with the Samsung smart home team. These guys have been calm increasingly difficult to deal with over the last three or four years - not just these switches but all other Samsung products in my house. I will never buy any additional Samsung gear for my house because of their horrible support and changing things without any consideration for the customer but that’s another story. However the Enbrighten tech-support team was just AMAZING to find and work with me to find work arounds to get it to work with Samsung Smarthome. They stayed on the phone with me to get it working - while the Samsung team decided to leave the call to take other calls because it wasn’t in their troubleshooting guide. GREAT customer service Enbrighten - you have a lifelong customer here now!! Samsung - you should take notes from these guys.

Scritto da: Larry Leung

Works well!

I donno what other people have as LED light bulbs I installed this GE Smart Dimmer switch and pair it with Smart Things, and it even dim my non-dimming LED spot lights No flickering! Excellent

Scritto da: Tricky Ricky

Easy to install

What I really wanted was a Z-wave switch that works without a neutral wire, but I could only find it in a dimmer option. It works well, but I would prefer a simple on-off for the application I needed the switch for. If it ever comes in a No-neutral on-off switch I would exchange out the switch where I have it. It does work well as far as No-neutral required

Scritto da: Ammar J. Ammar

Dimmable LED light flickering after 30mins of use

Bad quality product! I had the earlier version, that still works. This one only works for 30mins then LED lights start to flicker (I guess it heats up!) I’m using it for 9W x 6 LED lights, way within product limit! Still not working as it suppose! Going back for sure

Scritto da: Saboor

Good Product

Great Product... Timely delivery...

Scritto da: Callum

Not compatible with dimmable LED lightbulbs. Causes flickering.

These switches cause flickering with dimmable LEDs. I've used the first generation GE Enbrighten dimmers and they had no such problems. These switches also lack features from the first generation switches, such as the light turn on / turn off time is no longer adjustable. Avoid these dimmers.