0
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister

FOOTMASTER GD-80S-BLK-1/2 Nylonrad an NBR Pad Nivellering Caster, 1100 lbs, Stamm montéiert mat 0,5 Montageloch Duerchmiesser, Schwaarz Finish

Brand:FOOTMASTER

1.8/5

€
84.56

FOOT MASTER Ingenieuren erfannen den ORIGINAL Nivellering Caster am Joer 1989, a setzen de Standard fir Leeschtung an Haltbarkeet. Dëst genial Produkt kombinéiert d'Mobilitéit vun engem Caster, d'Héicht Upassbarkeet vun engem Niveaumontage, an d'Stabilitéit vun engem Fousspad. Den GD-Serie Leveling Caster Profil ass integral zu senger Funktioun. En décke Aluminiumrahmen gëtt benotzt fir d'Kombinatioun z'erreechen vu staark a kompakt ze sinn. GD-80-S-NYN-1/2-FBL gëtt op 550 kg mat enger Gesamthéicht vun 103 mm bewäert. Bis zu 15 mm Héicht Upassungsfäegkeet ass verfügbar fir e genee Niveau Set. GD-80-S-NYN-1/2-FBL ass mat enger 1/2-13 threaded Stellschraube montéiert (INKLUDERT). De Schwenk Sektioun enthält 2 Sätz vu Kugellager fir einfach Manöverbarkeet. Lager Raceway Ärmelen aus gehärtem Stahl verhënnert d'Schurfen op den Aluminiumrahmen, wat zu héijer Leeschtung an zouverlässeg Zouverlässegkeet féiert. D'Bewegung ass einfach dank engem 63 mm Duerchmiesser Rad mat engem Achswelle aus kale geschmiedete Stol. A wann se positionéiert sinn, bitt de Caster Säit Zougang zu engem ABS thermoplastesche Daumenrad dat benotzt gëtt fir de Fousspad ze senken. Wéi d'Rad vum Buedem opgehuewe gëtt, iwwerhëlt de Fousspad fir d'Applikatioun komplett stationär ze maachen. Déi fein Upassunge maachen fir de perfekte Niveau-Set z'erreechen, och ënner schwéiere Laascht, ass liicht Aarbecht fir dës weltbekannt Niveléierungscaster. Wann et Zäit ass fir erëm ze beweegen, erhéicht einfach de Fousspad fir d'Mobilitéitsfräiheet ze restauréieren.

Betrag
An de Weenche leeënKaaf elo

EAN: 0840955100789

Kategorien Industriell & Wëssenschaftlech, Material Ëmgank Produiten, Casters, Stem Casters,

Nylon 66 (D70) Rad huet enestaende dimensional Stabilitéit an tensile Kraaft. ABS thermoplastescht Daumenrad ass steif, haart a schlagbeständeg. Gehärtem Stahl Lagerhülsen verhënnert Schrauwen. Zwee Sätz vu Kugellager an der Schwenksektioun fir einfach Manöverbarkeet. Patentéiert Goss Aluminiumrahmen erreecht eng generéis Gewiichtskapazitéit.
Brand FOOTMASTER
Color Flat Black
Country of Origin Korea, Republic of
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Item model number GD-80-S-NYN-1/2-FBL
Manufacturer G-DOK Industries
Material Nylon, Aluminum, Plastic, Steel, Rubber
Mounting Type Recessed Mount
Product Dimensions 4.86 x 4.75 x 4.06 inches; 2.4 Pounds
Unit Count 1.0 Count

1.8

8 Review
5 Star
26
4 Star
17
3 Star
0
2 Star
16
1 Star
41

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: Alysia
Excellent solution for mobilizing heavy machinery.
Overall very good. Seem heavy and well made, although I share some other concerns I read about the ball bearings in the raceway being unsealed. I have not had any problems, but I could imagine that there might be an issue in a dirty or dusty environment over the long term -- just something to consider. These require the use of a wrench to raise or lower, although it is only truly necessary when there is weight on the rubber pad. Still, if you are going to stick these back in the corner where it is tough to get to, keep that in mind. They make a version with a built in ratcheting handle that might work better in those situations. My only real issue for my application (~1000lb metalworking lathe) is that the socket headed mounting bolts supplied are too short. I wanted to run it through a flat and split ring washer and I just ran out of available threads -- this was even backing it out a few turns from the caster already. I'll probably end up tracking down and buying longer bolts online, but it seems to have held up well so far with just the supplied nuts. I'm sure if they supplied longer bolts, someone would be writing a review saying they were too long, so it is just something to be aware of.
Scritto da: Volkhard Neumann
Solid performance
Just what I needed. To be able to move my 5' x 7' CNC machine out of the way in my garage I was looking for some solid casters. The way these casters are designed the wheels are just a "side-effect" to roll the machine around when needed. When in place the solid rubber feet are turned down by means of the red turning wheel first and with a wrench as soon as there is some load on the feet. Using 4 of these devises I was able to level my machine perfectly (while the garagefloor is slightly sloped) and it sits rocksolid on the floor. No other type of casters with breaks could give this type of performance and would wiggle due to the inertia of the moving gantry of the CNC machine. My machine weighs in at about 1200lbs and is way lighter than the maximum load 4 of these casters could take. IMHO oversizing has been right approach for solid results.
Scritto da: Amazon Customer
Junk
These are not worth the money. I bought them and sent them back. The wheel itself and the frame are nice but the way the leveling foot is made is ridiculous. The leveling stem screws into a plastic sleeve and that plastic sleeve is held in with a tiny sheet metal screw. The leveling foot wobbles everywhere. I bought an off brand that is made way nicer, and only cost 65.00 for the set
Scritto da: Franko
Not stable
I'm very disappointed with the Footmaster 500 lb casters I ordered. The foot has side to side movement in the housing and is not rigid, so my machine stand shakes and wiggles. The total weight of my machine and stand is about 600 pounds. These should have been plenty strong for the job. I put a similar set of casters (Carrymaster) on my lathe stand and they are rock solid. I'm very disappointed with the Footmaster casters. I would not recommend them to anyone who wants a solid base for their stand or table.
Scritto da: Jeremy
Great!
Excellent on concrete. I used 4 of these on a 450 lb Fab Table. They have just the right amount of firmness to the wheel that when on concrete the table and contents do not bash and rattle, Yet it rolls easily. They are an investment, but a must for serious fab tables. Note, I would not use these for precision metal cutting machines. Yes they are firm and sturdy when on the leveling pad, but you can "wiggle" the table a little. Not enough to matter, but definitely several thousands of an inch.
Scritto da: George S.
They work great, no complaints on this product
I bought three of these and currently have 1600 lbs sitting on them (three legs to my machine). They work great, no complaints on this product.
Scritto da: Polobbie
I am very disappointed with the fact they are not stable once the ...
I invested quite a bit in these specific casters. While they are very well built, the design is not thought through for the end user. I am very disappointed with the fact they are not stable once the casters are raised and my 1000 LB equipment is resting on the caster feet. My obvious assumption would be to expect a rock stable condition once the equipment is in position and the casters are raised. On the contrary, the rubber feet shake all over the place.
Scritto da: Gill Curry
would fail immediately
I order 4 for my spinning lathe. These are a joke. There is easily 1/4" slop lateral movement on the stem with small either #6 or 8 machine screws used to keep the wheel plum. I didnt even bother to install and returned immediately. I have used carrymaster in the past and expected the same tolerance and quality. Footmaster wasn't anywhere close to being in the same class. The 1100# rating wouldnt even keep a 3 drawer file cabinet secure. Junk

Zesummenhang Produiten

hot
Graham-Field Patient Liften Hënneschten Schwenkroller fir LF1030, LF1030CH an LF1040, Mobilitéitshëllef Deeler an Accessoiren, LF1030CL
4.1/5

€ 107.08

Graham-Field Patient Liften Hënneschten Schwenkroller fir LF1030, LF1030CH an LF1040, Mobilitéitshëllef Deeler an Accessoiren, LF1030CL
4.1/5

€ 107.08

hot
Schioppa L12 Serie, GLEEF 312 UPE G, 3 x 1-1/4 Schwenkwiel mat Total Lock Brems, net markéierend Polyurethan Präzisiounskugellagerrad, 175 lbs, 3/8 Duerchmiesser x 1-1/2 Längt Threaded Stamm, Orange
3.1/5

€ 39.36

Schioppa L12 Serie, GLEEF 312 UPE G, 3 x 1-1/4 Schwenkwiel mat Total Lock Brems, net markéierend Polyurethan Präzisiounskugellagerrad, 175 lbs, 3/8 Duerchmiesser x 1-1/2 Längt Threaded Stamm, Orange
3.1/5

€ 39.36

hot
J.W. Winco 500GBBG/FI Caster, Rad: Grey Thermoplastic Gummistécker, Glat Rolling, Net markéierend Reifen, 85 Grad Shore A Hardness, verbonne mat Polypropylene Rad Center
0.1/5

€ 26.13

J.W. Winco 500GBBG/FI Caster, Rad: Grey Thermoplastic Gummistécker, Glat Rolling, Net markéierend Reifen, 85 Grad Shore A Hardness, verbonne mat Polypropylene Rad Center
0.1/5

€ 26.13

hot
Slipstick CB681 2 Zoll Floor Protector Gummi Caster Wheels (Set vu 4) 5/16 Zoll Stamm oder Top Plack Montage Optiounen - Schwaarz / Grey Green
3.4/5

€ 39.58

Slipstick CB681 2 Zoll Floor Protector Gummi Caster Wheels (Set vu 4) 5/16 Zoll Stamm oder Top Plack Montage Optiounen - Schwaarz / Grey Green
3.4/5

€ 39.58

hot
Traulsen CK21 Caster Kit, sechs 6 Stämm
0.1/5

€ 456.77

Traulsen CK21 Caster Kit, sechs 6 Stämm
0.1/5

€ 456.77

hot
Shepherd Hardware 9496 3-Zoll Soft Gummi-Threaded Stamm Caster mat Side Brems, 3/8-Zoll Stamm Duerchmiesser, 150-lb Laaschtkapazitéit, Schwaarz
3.5/5

€ 29.63

Shepherd Hardware 9496 3-Zoll Soft Gummi-Threaded Stamm Caster mat Side Brems, 3/8-Zoll Stamm Duerchmiesser, 150-lb Laaschtkapazitéit, Schwaarz
3.5/5

€ 29.63

hot
Atosa B0604007 5 Watt Brems M14 Stem Caster
4.1/5

€ 133.10

Atosa B0604007 5 Watt Brems M14 Stem Caster
4.1/5

€ 133.10

hot
J.W. Winco 500KRC8/FIFK Caster, Rad: Grey Thermoplastic Gummistécker, glat Rolling, Net-Markéierung Reifen, 85 Grad Shore A Hardness, verbonne mat Polypropylene Rad Center
0.1/5

€ 27.07

J.W. Winco 500KRC8/FIFK Caster, Rad: Grey Thermoplastic Gummistécker, glat Rolling, Net-Markéierung Reifen, 85 Grad Shore A Hardness, verbonne mat Polypropylene Rad Center
0.1/5

€ 27.07

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen

Kategorien

All d'Kategorien
Menu Kategorien Noper Weenchen

Menu