0
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister

Freud 04-107: 1/4 (dia.) Double Flute Straight Bit mat 1/4 Shank, 7/8 Carbide Héicht 1/4 Zoll Duerchmiesser vun 7/8 Zoll Double Flute Straight Router Bit mat 1/4 Zoll Schank

Brand:Freud

3.7/5

€
37.85

Keng aner Firma kann dem Sea Gull Lighting säi Rekord passen fir dekorativ a funktionell Beliichtung a Plafongsfan Produkter ze produzéieren déi de Maart beaflossen. Hir Marke gi mam Numm gefrot, bekannt fir hir Qualitéit a vertraut vu professionnelle Elektriker, Hausbaueren, Architekten, Spezifizéierer a Konsumenten fir déi Bescht ze sinn. Hir Firmenziler sinn einfach: Si zielen d'Marken vun der Wiel fir den Endbenotzer vun eise Produkter ze sinn; de Liwwerant vun der Wiel fir hiren Distributeur an Utility Clienten; an de Patron vun der Wiel fir hir Mataarbechter.

Betrag
An de Weenche leeënKaaf elo

EAN: 0008925382355

Kategorien Power & Handwierksgeschir, Power Tool Parts & Accessoiren, Router Deeler & Accessoiren, Router Bits, Riichtaus, Spiral & Trim Bits, Riichtaus,

Black I.C.E. + Freud TiCo Hi-Density Carbide = 2X erhéicht Liewen a Leeschtung vs Standard onbeschichtete Bits. Black I.C.E. Beschichtung fir cool Schneidkante a super Chip Evakuéierung. Spezifikatioune: Zuel vun Cutters 2, Allgemeng Dia. 1/4, Gesamtlängt 2-1/4, Shank Dia. 1/4, Carbide Héicht 7/8.
Batteries Required? ‎No
Brand Freud
Color ‎Multi
Customer Reviews 4.6 4.6 out of 5 stars 418 ratings 4.6 out of 5 stars
Finish ‎Uncoated
Included Components ‎Double Flute Straight Router Bit
Item model number ‎04-107
Item Package Quantity ‎1
Item Weight 0.1 Pounds
Item Weight ‎1.6 ounces
Manufacturer ‎Freud
Material Carbide
Material ‎Carbide
Number of Flutes 2
Part Number ‎04-107
Product Dimensions ‎1 x 1 x 1 inches
Size One Size
Size ‎One Size
Style ‎1/4-Inch Diameter by 7/8-Inch Double Flute Straight Router Bit with 1/4-Inch Shank
Warranty Description ‎Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4188

3.7

13 Review
5 Star
78
4 Star
14
3 Star
4
2 Star
1
1 Star
3

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: Laptop
Worked as expected.
Used bit in pine for dovetail work. Needed the longer shank for the dovetail jig. Clean cuts. Little to no splintering. Went slow. No concern about breaking. Cut 8 corners, did not overheat.
Scritto da: vininger
Slightly smaller than 1/4"
I purchased this for a CNC router. I measure all my endmills prior to using them and this one came in just shy of the stated 1/4." To me this is not an issue because I always enter the real diameter of the endmill into my CAM software. I have never found an endmill that has been exactly to specifications advertised, but I do not purchase $100+ endmills because for what I do, the software corrects for inaccuracies in the diameter. This endmill works great on hardwoods and plywood. I prefer the straight flute type for wood because I do not get any tear-out and this one leaves a nice clean finish. It also works great at cutting HDPE plastic.
Scritto da: rhlogie
Smooth
Doing research, I saw that all the various Freud bits have great reviews. This is my first purchase of the brand and I can now understand why the company has such high ratings on its products. I haven't done much routing, but this produces the smoothest/easiest cuts while using the router that I can remember.
Scritto da: Kdub
This bit kicks butt!
I used this bit in a trim router and moving it at a steady rate, it worked from beginning to end of the job with no problems ????
Scritto da: Amazon Customer
Quality of product + packing and safe to remove it from.
Execellent piece of tool. Good quality and packing it is the best packing rigid plexiglass, so you can storage in the original packing , no chances to get cut with the sharp edges. Will buy again.
Scritto da: Kirk Arizona
Loyal to Freud
I do use other bits here and there. But freud has an awesome website to help the cnc user. They take the extra time to put out helpful information on their website. Their feed and speed calculator is awesome. I appreciate what they do for all of us. This is a great freud bit for your cnc use.
Scritto da: Ian Abercrombie
Nice finish, ultra sharp.
In my opinion you just can't beat Freud. This bit is so much better than the craftsman bit I was using until it broke the other day. I wish the old bit had broken ages ago!
Scritto da: Judi Munro
Like a hot knife through butter.
I used this bit to cut channels for plexiglass windows I’m installing in a four door barn style bypass closet DIY. The channels were cut in two passes at three consecutive depths and needed absolutely no sanding whatsoever! I’m looking forward to seeing what other kind of trouble I can get myself into with this nice bit after my remodel is complete.
Scritto da: Ryan Reid
Crumbled
I bought these twice. Didn't have a problem with first bits. 2nd order was very different. The bit disintegrated inside the collet- literally powdered and chunks of metal that ruined the collet opening.
Scritto da: Amazon Customer
Lots of chatter
Relief angle to steep, ridicules amount of chatter.
Scritto da: Jalp
My Go to bit
I use this bit in my router for cutting circles often. It’s durable and gives nice straight edges
Scritto da: Skyler
It’s Freud, it’s good.
It’s Freud, it’s good.
Scritto da: Jordan Pinder
Good quality and fair price
Exactly what I was wanting. Good quality. Fair price

Zesummenhang Produiten

hot
BOSCH 85611M 1/4 Zoll. Solid Carbide Double Flute Acryl Router Bit
3.3/5

€ 49.58

BOSCH 85611M 1/4 Zoll. Solid Carbide Double Flute Acryl Router Bit
3.3/5

€ 49.58

hot
WEN RB104FF 5/16 Zoll Straight 2-Flute Carbide-Tipped Router Bit with 1/4 Zoll Shank
0.1/5

€ 33.86

WEN RB104FF 5/16 Zoll Straight 2-Flute Carbide-Tipped Router Bit with 1/4 Zoll Shank
0.1/5

€ 33.86

hot
WEN RB001SF 1/8 Zoll Straight 1-Flute Carbide-Tipped Router Bit with 1/4 Zoll Shank
3.6/5

€ 26.84

WEN RB001SF 1/8 Zoll Straight 1-Flute Carbide-Tipped Router Bit with 1/4 Zoll Shank
3.6/5

€ 26.84

hot
Freud 04-512: 5 (Dia.) Double Flute Straight Bit with 1/4 Shank
3.5/5

€ 37.77

Freud 04-512: 5 (Dia.) Double Flute Straight Bit with 1/4 Shank
3.5/5

€ 37.77

hot
BOSCH 85187 1/2-Zoll Pilot Panel Down Spiralbit
0.1/5

€ 49.42

BOSCH 85187 1/2-Zoll Pilot Panel Down Spiralbit
0.1/5

€ 49.42

hot
BOSCH 85260M 11/16 Zoll. x 1-1/4 Zoll. Carbide Tipped 2-Flute riichtaus Bit
3.7/5

€ 56.98

BOSCH 85260M 11/16 Zoll. x 1-1/4 Zoll. Carbide Tipped 2-Flute riichtaus Bit
3.7/5

€ 56.98

hot
BOSCH 85146 1/4-Zoll Héichgeschwindeg Stahl Pilot Panel Bit mat Drill-through Point-Single Flute
3.4/5

€ 41.31

BOSCH 85146 1/4-Zoll Héichgeschwindeg Stahl Pilot Panel Bit mat Drill-through Point-Single Flute
3.4/5

€ 41.31

hot
Freud 04-102: 3/16 (dia.) Double Flute Straight Bit with 1/4 shank, 1/2 Carbide Héicht, Pack of 1, Perma-Shield Coating Red
3.7/5

€ 41.10

Freud 04-102: 3/16 (dia.) Double Flute Straight Bit with 1/4 shank, 1/2 Carbide Héicht, Pack of 1, Perma-Shield Coating Red
3.7/5

€ 41.10

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen

Kategorien

All d'Kategorien
Menu Kategorien Noper Weenchen

Menu