Krowne Wandkran Montage Kit (21-190L)

Brand:Krowne

3.4/5

60.01

Wandkran Montage Kit (21-190l). entworf fir einfach Installatioun. Erlaabt Installatioun vu Wandmontage Faucets a Wandmontage Pre-Spull am Standard Backsplash Raum. Enthält zwee all: 1/2 Naps Nippel, 1/2 Net & 1/2 Net Schweess ellen, Wäschmaschinnen a Spermutter. Niddereg Lead konform.

D'Package Héicht vum Produkt ass 4,0 Zoll. D'Package Breet vum Produkt ass 4,0 Zoll. D'Packagelängt vum Produkt ass 6,86 Zoll. Krowne Mauer Krunn Montéierung Kit (21-190L).
Brand Krowne
Color Bronze
Finish Type Polished
Handle Type Lever
Included Components Faucet Mounting Kit
Installation Type Single Hole
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 4 x 4 x 6 inches
Item model number 21-190-1
Manufacturer Krowne
Model Name Faucet Mounting Kit
Mounting Type Wall Mount
Number of Pieces 1
Product Dimensions 4 x 4 x 6 inches; 11.2 Ounces

3.4

13 Review
5 Star
68
4 Star
13
3 Star
10
2 Star
2
1 Star
7

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: asdfghjkl555
Fixed the leaking problem
This elbow is actually two pieces. The treaded end with washer needs to be removed with a vice. Teflon tape applied and screwed back together and tighten with channel locks and a rag to keep from damaging the treads. Mine had some dings but the tape took care of that. So far no leaks.
Scritto da: Skeeter
very solid
bought because of "people who bought this also bought this...." I think there was a conflict with the faucet we bought from the same manufacturer. NPT to NPS not good. Better to read all the descriptions before making a purchase. Changed the nipple out and had better results. Still have a drip after half a dozen tries. Will learn to live with it.
Scritto da: Taunya C.
You will likely need to wrap the threads with teflon tape (heavily wrap them) in order to get a good seal on the threads
Worked for what we needed. You will likely need to wrap the threads with teflon tape (heavily wrap them) in order to get a good seal on the threads, but that's part of dealing with NPT threaded fittings.
Scritto da: Amazon Customer
Mounting kit
Fit my commercial faucet perfectly. Exactly what we needed to put everything together to use it.
Scritto da: Alpha L Moore
No restriction
I needed this type of fitting, knowing the threads are loose I used RTV silicone instead of Teflon tape and have not had any leaks.
Scritto da: Dennison
Four Stars
A must if you buy the wall mount faucet
Scritto da: Customer
amen!
used on a very old 3 bay stainless sink faucet and worked perfectly
Scritto da: Adam
Solid product
Works great for what I need
Scritto da: Isaac
2 PIECE 90°
(TEFLON BEFORE INSTALLATION.) Didn't realize these where 2 piece part 90° . Use an INTERNAL PIPE WRENCH to avoid damaging the threads.
Scritto da: Amazon Customer
Easy to install
Glad I purchased this with my new taps, need these to install properly.
Scritto da: Harper
Works great.
The mounting kit was used retrofit older faucets in a commercial sink. Kit worked out perfectly!
Scritto da: Amazon Customer
Satisfied
Good quality
Scritto da: Amazon Customer
Waste of money.
Completely useless, you can buy better connections to attach your faucet to the water lines than this. I didn’t use any of these in the end. The threaded portion is only long enough to go through the drywall and that is not a good way to mount a faucet as it is soft and will eventually get loose over time. These faucets need to be mounted in something solid like a 2x4. This means longer connector. Waste of money, just pick up these parts at a good hardware store.

Zesummenhang Produiten

hot
0.1/5

€ 2639.15

0.1/5

€ 2639.15

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array