Legrand - OnQ Universal Montageplack 10 Zoll, Séchert Geräter a Strukturéiert Mediengehäuse Montageplack, Montageplack mat 4 FT Velcro Roll, Recessed Wall Plate fir Kabel z'organiséieren, Wäiss, AC1040 Plastik Universal - 10 Zoll

Name: Legrand - OnQ Universal Montageplack 10 Zoll, Séchert Geräter a Strukturéiert Mediengehäuse Montageplack, Montageplack mat 4 FT Velcro Roll, Recessed Wall Plate fir Kabel z'organiséieren, Wäiss, AC1040 Plastik Universal - 10 Zoll
Brand: On-Q
SKU: 0804428432722
Price: 64.83 EUR
Availability: InStock

Brand:On-Q

3.5/5

€
64.83

D'Universal Montageplack ass aus haltbaren ABS Plastik konstruéiert an entwéckelt fir sécher eng Vielfalt vun Drëtt Partei Geräter an den On-Q Plastik oder Metal Strukturéiert Wiring Enclosures ze montéieren. Et enthält (4) Plunger a Grommets an 8 Féiss Velcro Strapp. D'Universal Montageplack enthält vertikalen an horizontale Lanzplazen fir grouss Apparater sécher ze bannen. Schrauwen Lächer si strategesch op engem 1 Quadratmuster plazéiert a kënne benotzt ginn fir Apparater wéi en ONU, Cable Splitter oder Cable Amplifiers ze befestigen.

Betrag

An de Weenche leeën Kaaf elo

EAN: 0804428432722

Kategorien Tools & Home Verbesserung, Elektresch, Elektresch Këschte, Leitungen & Armaturen, Elektresch Këschte,

Ëmfaasst (4) Plunger a Grommets a 4 Féiss Velco Strapp. Universal Montage Lächer akzeptéieren Drëtt Partei Moduler fir maximal Kompatibilitéit ze maximéieren. Strategesch plazéiert Schraube Lächer erlaben Apparater sécher an der Uschloss ze befestigen. VARIETY VUN MONTAGEOPTIONEN: Bitt vertikal an horizontal Lanceplazen. ACCEPTÉIERT 3RD PARTY DEVICES: liicht geséchert kabellos a drahtlose Geräter am strukturéierte Kabelgehäuse.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	On-Q
Brand	‎On-Q
Color	White
Color	‎White
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 764 ratings 4.5 out of 5 stars
Finish	‎Abs,Metal,Plastic
Finish Type	‎Abs,Metal,Plastic
Included Components	‎
Installation Method	‎Screw In
Item Dimensions LxWxH	0.5 x 13.2 x 10 inches
Item Dimensions LxWxH	‎0.5 x 13.2 x 10 inches
Item model number	‎AC1040
Item Package Quantity	‎1
Item Weight	‎13.7 ounces
Manufacturer	‎Legrand
Material	Nylon, Acrylonitrile Butadiene Styrene
Material	Nylon, Acrylonitrile Butadiene Styrene (ABS)
Material	‎Nylon, Acrylonitrile Butadiene Styrene
Number Of Pieces	‎6
Part Number	‎AC1040
Product Dimensions	‎0.5 x 13.2 x 10 inches
Size	‎Plastic Universal - 10 inch
Style	‎Plastic Universal - 10 inch
Switch Style	Decorator
Switch Style	‎Decorator

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: John

Good Versatility, but

The AC1040 Mounting Plate provides good versatility for attaching things. I mounted 2 items and have room for more. The "but" has to do with the black 8 piece mounting system. When I tried to get one fully inserted, it shattered. I simply switched to using screws and drilled little holes in the back of the enclosure slightly offset from the attachment holes.

Scritto da: Scott

Must have if you want and organized cabinet

The picture says it all.

Scritto da: Brad Christiansen

Not well for Switches

I can see the idea, but this did not work well with my new 16 port TP Link switch. 1) As others have mentioned, the velcro is almost too wide to fit through the openings. This may be on purpose to ensure a tight fit, but it makes the "install" relatively difficult. 2) Using two velcro straps to go across the switch width-wise, the straps end up blocking some of the ports. 3) Using one velcro strap to go across the switch length-wise, I was unable to get the strap tight enough to hold the switch in place. 4) Regardless of velcro orientation, I was struggling to find a good area to run the power cord to allow it to plug into the switch. This may work better for other components or people smarter than I am, but I've returned this for now as I could not get it to work for me.

Scritto da: Baxter

The On-Q shelf you are looking for . . .

Don’t buy the plastic one! This is slim and strong and can hold a lot of different devices. A must if you have an On-Q wall unit.

Scritto da: Justin Leonard

Bit awkward for freestanding devices

Bought this to organize my at-home OnQ panel with a 16-port switch and AT&T modem. Unfortunately the full width plate doesn't leave enough room on either side for the switch to sit flat, so rather than cut it to size I opted to strap it sitting off angle. The reuseable velcro straps are a nice touch. Ultimately if you have devices big enough to require the full-width plate, you might be better off just running cables into a small rack.

Scritto da: six7one

Does what I need, but not perfect

This was exactly what I needed for my structured wiring enclosure. However, I can't give it 5 stars for a couple of reasons. First, the mounting holes lined up perfectly in my 42" Legrand enclosure. The problem was with the mounting pins and grommets included with the kit. They do not provide any stability to the plate and anything mounted on it would cause the entire plate with equipment to sag. I ended up using zip ties at the top to support the weight. Secondly, the plate itself has a useful design for mounting options. However, it can also be a limitation. I could not mount my equipment the way I originally planned. I ended up mounting my firewall in the upper left quadrant and my cable modem in the lower right quadrant just to get all the cabling to work out and line up. Other than those two issues, it's a useful addition that I needed to clean up my enclosure.

Scritto da: David J. L.

Supplied Velcro straps too wide to go through the horizontal loops on the full-width plate

Both the half and full width fit my 2005 OnQ enclosure perfectly. The Velcro supplied with the half width works in both sets and loops, however that supplied with the full width only work well for running vertically. They are too wide to go through the loops to hold an item wrapped around "at the waist". For example, I want my network switch ports to be on the top and run the Velcro horizontally around the body so that it doesn't get in the way of the ports. I had narrower Velcro on hand, but otherwise you'll need to get the scissors out.

Scritto da: Scott K

Can Fit Leviton Enclosure With Drilling

Two of the four corners didn't line up with Leviton 47605-28N SMC 28-Inch Series Enclosure. Required marking and drilling two 1/4 inch holes in the cabinet. In the photo the two holes on the left line up. The two holes on the right worked after marking and drilling through the cabinet. Look closely you can see two holes in the plastic now patched with caulk. Drilling holes in the mounting plate doesn't work.

Scritto da: RS

A must for structured wiring boxes

Did the job and now my router and switches are tucked in my structured wiring box. Flexible velcro options are great for orientation and weildy devices.