0
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister

Minelab Pro-Swing 45 Gäert fir Gaart Metal Detektor Black

Brand:MINELAB

3.4/5

€
194.86

Pooline Produkter Ultra Deep Leaf Skimmer Grouss Lose Polyester Écran Geformt Net an Polypropylene Frame. Frame Gréisst ass 8 Héicht a 17 Breet.

Keng Unitéiten verfügbar

EAN: 811493014326

Kategorien Patio, Rasen a Gaart, Outdoor Power Tools, Ersatzdeeler & Accessoiren, Metalldetektor Deeler & Accessoiren,

Villsäitegkeet fir d'Garness un all Minelab Detektor mat der universeller S-Manschett ze befestigen. Lénks a riets-Hänn Fäegkeet mat engem einfachen Klick an J-Strut. Déi einfach Bungy Upassung déi e optimale Schwenkpotenzial a korrekt Haltung garantéiert a mam Quick Release R-Clip kënnt Dir Detektor ofhuelen. 8 Upassungspunkte fir e wierklech personaliséierte Passform an 8 Befestigungspunkte fir all Är Erkennungsaccessoiren ze droen. Den ergonomesche Gürteldesign verdeelt d'Gewiicht vun Ärer Schëller gläichméisseg iwwer de J-Strut, wat Äert Detectiounsschwong méi hell mécht.
Adjustable Length Yes
Batteries Required? No
Brand MINELAB
Country of Origin China
Customer Reviews 4.4 4.4 out of 5 stars 132 ratings 4.4 out of 5 stars
International Protection Rating IP65
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 12 x 11 x 5.25 inches
Item model number 3011-0245
Item Weight 2.25 Pounds
Manufacturer MineLab
Material Metal
Product Dimensions 12 x 11 x 5.25 inches

3.4

12 Review
5 Star
67
4 Star
18
3 Star
6
2 Star
3
1 Star
6

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: Jon Almada
Works beautifully
I ordered this harness with more than a little trepidation. I have a somewhat bad back and I decided to try to do something to extend my hunting time for metal detecting to more than a couple of hours. On receiving the well packed harness, I assembled the unit and went out for my first expedition. To say it was an experience in completely re-learning all my moves was an understatement. I had to adjust everything and come up with a completely new set of movements for digging targets. And the harness did require some adjustment throughout the dig to accommodate my personal comfort. So... I ended the first hunt with the jury still out on my hunting with this harness. The next day, I went out and tried again and had a much more comfortable hunt. The harness really does work well and my Minelab Explorer SE Pro detector "floats" above the ground and is much nicer to hunt with. The secret is in adjusting the plastic weight-bearing rods to match your body height and it pays to watch the Minelab video that covers all the adjustments. What I really liked was the ability to put my finds bag on the lower belt and to be able to put my large Pistol Probe pinpointer on the other side for easy grabbing (something I had never found a good way to do before!) - The harness makes adding accessories easy and I'm sold on it - I'll never hunt without it again! Suggestions for new users - Get used to clipping the detector on and off when digging a target. At first it was hard to do, but I have it down now to a routine and it works well. And take your time fitting the harness to your body needs - work on comfort first and consider your first hunt as a "get to know the harness" exercise over and above being a serious hunt! A couple of suggestions for the good folks at Minelab: 1. For the lower-belt, consider some sort of clipping system for holding finds bags or other unwieldy accessories in one place. I'm going to come up with my own solution of this sort, but it is somewhat maddening to have to keep it from sliding around - a clip or two to hold a bag tight to the belt would be really helpful. 2. The other suggestion is to add more Velcro EVERYWHERE possible so more accessories can be hung off of the harness. One final suggestion for users - The rod arrangement for the load-bearing part of the harness comes in two pieces that assemble either for right or left handed users. The issue I ran into early on was that the rods can come apart once you are taking the harness on or off. I use a short length of electrical tape to hold the rods together and it works just fine. These two rods plug together with a really neat marking system that is pretty intuitive, but I do wish that the Left and Right indicators were painted to allow 50+ year-old eyes to better see the rod connections so it is simpler to get the plugins right. Another item I'm going to try adding is a hydration system for the back - seems like a natural for desert and hot-weather hunting. Final point for the folks at Minelab - I own a Excalibur 2 model for water hunting - How about you guys come up with an aquatic version of this to help with water hunts? I'd love to try this in water, but I think the materials need to be changed to be more tolerant of fresh and salt water. Bottom line: This is the best tool I ever run into for getting my accessories managed and extending my hunt time dramatically. I'm very impressed! A very worthwhile purchase and it is now part of my regular hunting regimen.
Scritto da: Bob
Would have lost my Minelab CTX3030 without it. proswing 45 harness acessory
Coupled with the proswing accessory to have a bungy cord to take the weight off of my arm. I got just that extra two steps in the surf and a wave hit me, that knocked me off my feet, splasing face first. I actually let go of my detector. Thank goodness I had this harness it was connected to, or I would have lost it to Davey Jones Locker. I spent 6 hard days beach hunting, I never got fatigued swinging the detector.
Scritto da: Gary R. Benfield, Jr.
Adjustment on J strut and the crossbar addition
This is for those who use the pro swing 45 harness. When you kneel down or take off the harness and the J strut comes apart each time than you don’t have it adjusted correctly for your height and waist. You shouldn’t have to tape it together at all. It works very well. Also for more comfort, I highly recommend getting another J strut so you have one on the left and right side. Also get the crossbar that goes across your chest. With doing this , the harness will stay center on your body and not pull to one side and rub your neck. Doing this will make the harness very comfortable to wear.
Scritto da: David N. Nighteagle
Fairly well made. Poor put together instructions.
The unit is fairly well made. I haven't been able to use it for an extended period but believe it will work well.
Scritto da: Art K
Works great with minelab 800
It works perfect with my mind lab 800 takes a while to set up and adjust, I had to put it on several times use it to fit me perfect but it was worth it. Now I can metal detect all day and not even feel the metal detector, fyi watch YouTube videos to help you with setting it up , enjoy
Scritto da: RC
Adapt this to E-trac with a Husky Hang All and it's awesome for all day big-coil hunts.
When used with the Minelab E-trac, it enables all-day use of very large coils (such as the excellent NEL Big Coil 13x17) without excess soreness in your back and shoulders. However, the small velcro hook that comes with the harness works poorly with the E-trac. So, when you buy this, also buy the 24" Husky Hang All product. The Hang-all forms a cradle in which you "hang" the E-trac. Then you can take back control of the handle and buttons. Amazon doesn't seem to have any Hang-Alls, but you can get them at Home Depot. Attached an image of the connection setup that works well for me. Don't try to give ALL the weight to the harness - just give it ~3/4 of the weight and you'll be blown away by how well it swings. Add theQuick Belt System QBS37 10"x9" 2-pocket "Boxed" Covered Bag for Tools, Materials, Accessories, Hiking-Camping-Fishing-Hunting-Dog Walking-Dog Training andQuick Belt System QBS7 2-buckle Nylon Modular REVERSIBLE "Add-A-System" Sleeve for Tool Belts, Utility Belts and Most Other Belts for Men-Women-Children-Hiking-Walking-Camping-Fishing-Hunting-Dog Walking and you'll have a finds bag you can hang from this system also. In photo: A) Pro Swing 45 Harness (this product) B)Nite Ize Size-5 S-Biner Dual Spring Gate Carabiner, Stainless C) Husky Hang All (24") D) Husky Hang All "hugging" the E-trac
Scritto da: Matthew J.
All Day Long
This harness came standard with my GPZ 7000, which is a big detector to swing around all day. At first the harness was uncomfortable and awkward. So I kept playing with it, BINGO! figured out how to tune and SEAT the support rodes properly(I had messed it up). spent a bit more time after that adjusting the harness itself for my torso. After that this thing was a game changer for me. I bought a second one for use with my CTX3030. FYI...also purchased a second support rod and installed it on the left side of harness, that way I can change hands and still have the support for terran changes. This harness and support system would work with any detector I have ever used, it's about as universal as you can get. It is still a bit bulky, but great support and padding, not really a down side when your in the field all day. Thank Minelab!
Scritto da: Blanca M.
Perfect for people with carpal tunnel and shoulder problems.
I like to do gardening and go with my husband to the beach to do metal detector, but my carpal tunnel and my shoulders were a big problem until I got this Harness. It works Great! for me, I don’t feel my metal detector machine nor my Line and grass Trimmer. Wow...what an invention. Highly recommend it, plus Minelab products and customer service are great, you never waste your money with them.
Scritto da: Bonnie Lembke
Harness works well when set up properly. Watched online video on how
The harness is generally built very well except for problem where the j arms connect together in the center They fit nice and tight together but still would come apart when in use somehow? A quick fix was to wrap joint with electrical tape. Problem solved. Very surprised at a problem like that being the product is Minelab??
Scritto da: Verena S.
Für Frauen eher ungeeignet
Tolles Geschirr, meinen Mann passt es perfekt. Für mich, trotz vieler Einstellungen keine optimal Passform
Scritto da: Alan R.
Well made
The harness works well and is comfortable , but I wish You could attach a day pack to it Instructions for assembly and adjustments are not that great, watch some YouTube videos for that It does take the weight of the detector so I can swing longer
Scritto da: Theodore Anderson
Would buy again
Best thing I have ever got for metal detecting works amazing

Zesummenhang Produiten

hot
Bounty Hunter 4 Zoll Gold Nugget Sich Coil
3.5/5

€ 61.76

Bounty Hunter 4 Zoll Gold Nugget Sich Coil
3.5/5

€ 61.76

hot
Fisher 12 Zoll DD Coil F75, Trianguléiert Bi-Axial
0.1/5

€ 360.30

Fisher 12 Zoll DD Coil F75, Trianguléiert Bi-Axial
0.1/5

€ 360.30

hot
Bounty Hunter Coil Cover, 4 Zoll 4 Zoll
3/5

€ 42.16

Bounty Hunter Coil Cover, 4 Zoll 4 Zoll
3/5

€ 42.16

hot
Minelab Ëmwelt E-Trac Cover Gaart Accessoire
3.5/5

€ 39.45

Minelab Ëmwelt E-Trac Cover Gaart Accessoire
3.5/5

€ 39.45

hot
BOUNTY HUNTER Bounty Carry Bag schwaarz
3.7/5

€ 66.82

BOUNTY HUNTER Bounty Carry Bag schwaarz
3.7/5

€ 66.82

hot
Minelab CTX 3030 Waasserdicht Kopfhörer Gaart Accessoire
3.4/5

€ 213.97

Minelab CTX 3030 Waasserdicht Kopfhörer Gaart Accessoire
3.4/5

€ 213.97

hot
Minelab Ëmwelt FBS Cover Gaart Accessoire
2/5

€ 60.65

Minelab Ëmwelt FBS Cover Gaart Accessoire
2/5

€ 60.65

hot
BARSKA BE12970 Winbest Pro-300 Intermediate Prospector Metalldetektor fir Erwuessener mat waasserdichte Coil an LCD Indikator, Multi, One Size
4.1/5

€ 241.05

BARSKA BE12970 Winbest Pro-300 Intermediate Prospector Metalldetektor fir Erwuessener mat waasserdichte Coil an LCD Indikator, Multi, One Size
4.1/5

€ 241.05

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen

Kategorien

All d'Kategorien
Menu Kategorien Noper Weenchen

Menu