NEIKO 11142A 10 Pack Zirconia Klappe Discs 4-1/2 fir Wénkelschleifer, 40 Grit Flapper Rad, Wénkel T29 Schleifrad 4.5 Zoll Klappe Disc, 7/8 Arbor Schleif Disc, Klappe Rad fir Holz & Metall Schleifen 40 GRIT Flap Disc

Brand:Neiko

3.7/5

47.62

NEIKO 11142A Premium Zirconia Flap Discs kënne bis zu enger maximaler Geschwindegkeet vun 13.300 RPM funktionnéieren. All 40-Grit Klappe Disc an dësem 10-Stéck Set ass mat engem 7/8-Zoll Arbor ausgestatt. Dës abrasiv Klappescheiwen kënnen op de meeschte Wénkelschleifer an op den härteste Metallschleifapplikatiounen benotzt ginn.

SPECIFIKATIOUNEN: All Disc moosst mat engem 4-1/2 Zoll Duerchmiesser mat enger 7/8 Zoll Arbor Gréisst, sou datt et kompatibel ass mat de meeschte Wénkelschleifer mat enger Geschwindegkeet vu bis zu 13,300 RPM. Entworf fir Schleifen, Vermëschen, Schleifen a Finishen op eng breet Palette vu Materialien. FIBERGLASS BACKING PLATE: D'Harzfaserkonstruktioun ergänzt duerch d'Glasfaser-Réckplack absorbéiert Schwéngungen ouni ze schmieren an hëlleft ze vermeiden datt d'Aarbechtsstéck während der Benotzung kontaminéiert gëtt. ANGLED T29: Beveled Type 29 Discs sinn am Beschten an engem Wénkel benotzt a si effektiv fir Kanteformen, Entburren, Schleifen Konturen, a Radiusschleifen op Stol, Blech, Schweißen, Bearbechtung, schwéier Ausrüstung an industriell Ënnerhalt. STOCK EMOVAL: All Wénkelschleifer Schleifscheif ass mat grober 40 Grit Zirkoniumoxid gemaach, sou datt dës abrasiv Klappescheif ideal ass fir aggressiv Schleifen op schwéier ze schleifen Materialien wéi Metall, Gummi, Plastik, Glasfaser an Holz. PREMIUM QUALITÉIT: Dës Wénkelklappe Discs, och bekannt als ofgeschniddene Rieder 4 1/2 Zoll, si mat industrielle Grad Premium Zirkonium-Schleifstoff gebaut fir Stäerkt, Haltbarkeet a verlängert Disc-Liewen, well et héich Temperaturen an Drock hält.
Assembled Diameter 4.5 Inches
Assembled Diameter ‎4.5 Inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand Neiko
Brand ‎Neiko
Color ‎Bevel Type 29
Compatible Devices Angle Grinder
Compatible Devices ‎Angle Grinder
Construction Type ‎Cut-off Wheels
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 2,273 ratings 4.7 out of 5 stars
Cutting Diameter ‎4.5 Inches
Grit Material Zirconia Alumina
Grit Material ‎Zirconia Alumina
Grit Number ‎40
Grit Type Coarse
Grit Type ‎Coarse
Included Components ‎Flap Disc
Item model number ‎11142A
Item Package Quantity ‎1
Item Weight ‎0.01 ounces
Manufacturer ‎Neiko
Material ‎Ceramic
Maximum Rotational Speed ‎13300 RPM
Package Dimensions ‎4.84 x 4.8 x 3.94 inches
Part Number ‎11142A
Pattern ‎Flap Disc
Power Source ‎Air Powered
Product Dimensions ‎4.5"L x 4.5"W
Size ‎40 Grit
Style ‎40 GRIT

3.7

13 Review
5 Star
76
4 Star
17
3 Star
4
2 Star
1
1 Star
1

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: John D. Rogers
As great as flap discs at the big store
I am a woodcarver and sometimes go thru 2-3 of these a day. The similar quality ones at the store are $12-$15 each. I was able to get 10 of these for the price of 1. I will continue to buy this exact brand, as long as the quality continues
Scritto da: Ryan
Great discs!
Lasts a long time and does the job well! These are far better than the ones sold at the big box stores and far cheaper!
Scritto da: EC
A litte more agressive
I had been buying Forney discs at the local hardware store. They are more expensive and the store was out. These discs work well but are a more cource grit. I'm ok with that for my application but just an observation if you are used to another brand. I am using 80 grit.
Scritto da: JNKAmazon
Flap disk
Great price
Scritto da: RonDon Volante
My go to
Go to at my fab shop. They get it done and are inexpensive
Scritto da: Donald S.
Wear faster than quality brands.
I've only used one, but notice it is wearing faster than the name brands I've used. Still I think the price is good enough to make this a good deal.
Scritto da: Mark Gandulla
Good value for what you pay
I wasn't expecting much of these since they only cost $2 each but they worked well for what I needed. They do wear out quite quickly though. I was sanding rust spots off of my utility trailer so I could repaint it. Initially they worked well, taking the rust down to bare metal. But after sanding for about 5 minutes you could see that they were starting to wear out. If you want something that's going to last a long time, these aren't it. But like I said, it's a good value at only $2 each and they do work well.
Scritto da: DC_Turtle
Great Value. Better than big box store
Used the 40 grit for removing surface rust for a classic car restoration. Abrasive held up well and left a smooth finish.
Scritto da: ManyMonkeysLooking
Bee’s knees
These sum bitches are better than my grinding wheels. They clean up the metal nicely for welding and also if you are a crap welder like me you can fix your mistakes. I need to hide my mistakes because my husband is so judgmental on my welding.....but here’s a fun fact....it’s a good think he isn’t welding for a living because we’d starve!!!! Totes would recommend these things unless you’re name is Frank....if your name is Frank then keep using your awesome grinding wheels.....you know who you are....eye rolls!!!!
Scritto da: Anaxas T.O.
Worked Well for Resurfacing Inside of Aluminum Rims
I had chromed aluminum wheels that were corroding and peeling which caused the stick on wheel weights to break free. I decided to use these flap discs to remove the loose chrome. They worked well and the 120 grit was aggressive enough to remove the chrome and not too coarse as to gouge the aluminum. Since this was on the inside of the wheel I wasn't too concerned too much about the finish, but after I painted them the surface looked very good. I used 3 discs to finish the 4 wheels because they would gum up slightly with aluminum (not a problem with the disc, but the medium I was using them for). Much more affordable than going to the local hardware store.
Scritto da: Lino Sapienza
Sharpening Mower Blades
I bought these to clean off some rust off metal plates and also sharpen my mower blades. I bought 40 grit and so far I am happy with results. when using a new disc I can say that it worked well, question is how long they last, I am not there yet. They did a great job of cleaning metal and sharpening dull blades, I recommend buying them, great buy
Scritto da: Kyle Jensen
Best Flappers on Amazon
I go through a ton of flap discs weekly, these guys seem to last longer and is priced better than any other flapper I have used. Just need to add a subscribe and save model!
Scritto da: Hm
Very good value
Bought for Christmas stocking, husband is very happy with overall quality, better then any he had purchased from the auto store etc. Would buy again.

Zesummenhang Produiten

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array