Nilight 2PCS 16Inch 11 LED Red Trailer Light Bar fir Park Stop Turn Signaler Schwäif Bremslicht DOT kompatibel IP65 Waasserdicht Truck Trailer Marker ID Bar, 2 Joer Garantie

Brand:Nilight

3.6/5

€
40.39

Nilight 2PCS 16" 11 LED Red Trailer Light Bar Ideal Applikatioun fir all breet oder schmuel Overland Gefier, déi Qualitéit erfuerdert DOT konform Beliichtung Dimensiounen 15 6 x 1 2 x 0 5 Center Hole Gréisst 14mm x 14mm Aarbechtsspannung 12V LED Typ 11PCS 2835 SMD LED fir all Liicht Drot Lead 22 Jauge 10 Zoll Längt Material Polycarbonate Lens a Wunneng IP65 waasserdicht Taux DOT konform Package Enthält 2 x 16 Zoll 11 LED Trailer Marker ID Bar 2 x Hardware Pack.

Keng Unitéiten verfügbar

EAN: 0767912577203

Kategorien Automotive, Aussen- Accessoiren, Trailer Accessoiren, Beliichtung,

Breet Applikatioun Kann perfekt op déi meescht 12V Heavy Duty Camionen, Semitrailer, Cargo Trailer, Boot Trailer, Rees Trailer, Päerd Unhänger, RV Camper Aarbecht Gefierer, etc.. Package Enthält 2PCS Trailer Marker ID Bar mat 2 Hardware Pack. Light Bar Montage Fir d'Liicht opzebauen, ass eng Optioun en zentrale Lach ze bueren oder dat existent Lach ze benotzen fir duerch d'Réckdrahtleitung ze goen an dann déi zwee Enden ze fixéieren andeems Dir an déi zwou geliwwert Schrauwen buert. wann Dir déi zwee Enden fixéiert oder e Klammer benotzt fir d'Luucht ze montéieren fir Lächer fir d'Réckdrot ze vermeiden. Einfach Drot Verbindung Fir Drot Verbindung wäiss Drot fir Buedem schwaarz Drot fir niddereg Hellegkeet Schwäif Liichtjoer a roude Drot fir héich Hellegkeet Brems- Liichtjoer. Héich versiegelt & haltbar Déi viischt Polycarbonat-Objektiv ass sonesch an d'Gehäuse geschweest an de Réck Drotleit gëtt op Klebstoff bäigefüügt fir sécherzestellen datt d'Liicht komplett versiegelt ass Waasserdicht genuch fir all Wiedermëssbrauch ze widderstoen. Multi-Funktiounen All Luucht huet 11 héichwäerteg LED-Output héich Hellegkeet an niddreg Hellegkeet Kann funktionéiert perfekt als Parklicht Stop Liicht Tour Signal Luucht Schwäif Luucht an Brems- Luucht.

Brand	Nilight
Brand	‎Nilight
Color	Red
Color	‎Red
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 3,851 ratings 4.6 out of 5 stars
Item model number	‎TL-10
Item Weight	‎9.2 ounces
Lens Color	Red
Lens Color	‎Red
Lens Material	Polycarbonate
Lens Material	‎Polycarbonate
Light Source Type	LED
Light Source Type	‎LED
Manufacturer	‎Nilight
Manufacturer Part Number	‎TL-10
Model	‎TL-10
Package Dimensions	‎16.54 x 2.09 x 1.65 inches
Position	Rear
Position	‎Rear
Special Feature	Waterproof
Special Feature	‎Waterproof
Special Features	‎Waterproof
Specific Uses For Product	Rear Lights
Specific Uses For Product	‎Rear Lights
Vehicle Service Type	Truck, Trailer
Vehicle Service Type	‎Truck, Trailer
Voltage	12 Volts
Voltage	‎12 Volts

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: RedRanger

Look good and they are bright in the stop mode !

I wired up these lights parallel and with a three flash stop light module on the bench using a power supply. They are bright, perfect for brake lighting, and respond instantly, no delay. Once installed on the truck I will post ease of install, wiring, and if they are waterproof. So far... good light !

Scritto da: Irakli

????

????

Scritto da: AZshopper

Works as advertised but didn't fit my trailer

I bought this to replace a broken tail light on my Everlite cargo trailer. My old light has a part # TL-16020-R on it and I thought this would work in its place. My old light has a little flange where the wires protrude from that is offset a little and this light has the flange in the middle of the light so it doesn't work for my application. Light works as advertised so I'm not going to mark it down, had to return it.

Scritto da: Dave

Intensity difference between parking and brake lights is too small

This are nice low profile lights. They are nice and bright, but there is such a small change from parking to brake/signal intensities that it is hard to see. A custom hole must be drilled for the wires.

Scritto da: SgtCop

Bright Lights

Lights were easy to install assuming you have a drill and bits that are specifically for metal. The information provided by others in these reviews were most helpful in taking the guess work out of what size bit for the raised area in the rear of the lights in order for the lights to mount flush on the ramp. I found a 5/8” bit worked great with no filing to increase hole size. I agree with others as well as the wires could stand to be thicker. The 22 gauge is fairly delicate. I had to use butt connectors that were different sizes on each end due to the current wires on my trailer are 16 gauge. Once on, as you can see, the lights are very bright and a nice addition for increasing the visibility of the rear ramp, especially at night versus just the 2 small round tail lights. Construction of lights seems to be very well made. Cost wise, the price is every bit worth the product. No disappointment on my end.

Scritto da: Cyrus Fakhari

Cars see your turning and let you in with the bright light

this is the only way people know your turning they are are so rude when they see a trailer they speed on by you have to hit them in the face to wake them up so this light is the only answer to have it up on the the back side I put electricals tape in the middle because its a little blinding during the night only in bumper to bumper traffic but nothing like the Cadillac Vegas style break lights that come stock there SUV Must have you own any trailer now they are coming stock on cargo ones but you need it for Dump trailers the little light at the bottom is lost to drivers they need a translator

Scritto da: Mary

Couldn't make the wiring any smaller and it's not copper...

While it seems like the light itself may hold up to the elements, I have to say that the maybe 24 gauge non-copper wiring disappoints. It remains to be seen, but it is so thin as to bring to question whether the Chinese made wiring manufacturers realize that it's going to be outside on a trailer. I mean, they couldn't put literally 12 cents worth of copper into it?! It's almost as small as they use for Christmas lights. I do like the thin bar feature of it, which is why I bought the pair.

Scritto da: Amazon Customer

Cheap wires

These tail lights seamed like decent quality for the price. The are easy to wire and the LEDs are bright. After a couple of months the wires have become brittle and break off flush at the epoxy behind the light. This happened to both tail lights. The running light on one and the blinker/brake light on the other. There’s no way to splice the wires and thus making the lights garbage. The lights worked great until they didn’t.

Scritto da: Richard

Arrived on time and good price.

Arrived on time, easy too install, brightness is great at night or day. The only complaint I have was the wire was very thin to work with. Wish it was a little thicked and the light should have been flush mount on the back for easier installation.

Scritto da: bcook

Works well for a motorcycle carrier.

Lights are well made and work well. They are more than adequate for my use. Install on a "motortote" motorcycle carrier. They needed to be installed with a beacket due to the protrusion at the back (9/16" dia ). For the miney they are a good value. I would highly recommend them when the profile is warranted.

Scritto da: ryan

They totally work awesome

IT'S ALIVE !!! HEHEHEHE!! My brake lights stopped working because my twilight harness is garbage but I really didn't want to buy a new one, because they are like $300 for one! So I cut the brake, and running light wires and attached the Nilight bar into it. It works! It works great! Hahahahaha. So happy !!! So easy to do !! So glad I don't have to buy new taillight harnesses for my my crappy van. ????

Scritto da: Kandyce

Easy to install

Good product! Nice and cheap and easy to install!

Scritto da: Amazon Customer

Works as advertised.

Easy to install. Nice and bright.