0
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister

Olympia Tools 4 Zoll x 3 Zoll Turbo Clamp, C-Clamp, 38-151 4 x 3 Zoll

Brand:Olympia Tools

3.5/5

€
40.85

3 Halsdéift mëllbar Eisenrahmen mat Stol Hardware mat Quick Release Knäppchen

Betrag
An de Weenche leeënKaaf elo

EAN: 0883652381518

Kategorien Tools & Home Verbesserung, Power & Handwierksgeschir, Workholding, Handwierksgeschir, Klameren,

SUPERIOR INSTRUMENTS: Olympia Tools liwwert Qualitéit & innovativ Hand- & Spezialgeschir, Toolaccessoiren & Outdoorausrüstung fir Bau, Holzaarbecht, mechanesch Ënnerhalt & Heemreparatur. DÉI RÉCHT TOOL FIR DEN JOB: Mir konstruéieren eng Rei vu Bolzenschneider, Klameren, Meisselen, Klappkarren, Hammers, Zangen, Seeën, Schrauber, Bandmoossnamen, Utilitymesser, Viséier, Bolzenschneider, Seeën & Schlësselen. MADE TO LAST: Eis haltbar a laang dauerhaft Tools hëllefen Iech bei Haus-, Garage- an Industrieprojeten. Mat professionnelle Qualitéit, reparéieren & fixen Themen einfach mat eisem Tool Cabinet Essentials. HÉI QUALITÉIT: Ideal fir Konstruktioun an Holzaarbechten, dëse Befestigung hält Objeten enk zesummen. TURBO CLAMP: Fonctiounen 3 Halsdéift a formbar Eisenrahmen mat Stol Hardware. Quick Release Knäppchen.
Batteries Required? ‎No
Brand Olympia Tools
Color Silver
Color ‎Silver
Country of Origin ‎China
Customer Reviews 4.4 4.4 out of 5 stars 22 ratings 4.4 out of 5 stars
Included Components ‎4in x 3in Turbo Clamp
Item model number ‎38-151
Item Package Quantity ‎1
Item Weight ‎2.83 pounds
Manufacturer ‎Olympia Tools
Material Iron
Material ‎Iron
Package Dimensions ‎9.25 x 4.96 x 1.46 inches
Part Number ‎38-151
Size ‎4 x 3 In
Style Industrial
Style ‎Industrial

3.5

5 Review
5 Star
67
4 Star
20
3 Star
8
2 Star
0
1 Star
5

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: Zephyr Meyers
Great for brake calipers
I bought this because I knew I'd be replacing my brake pads and rotors soon, but needed something to compress the piston. Using the old brake pad, this works amazing with clamping it down to fit back over without having to buy a specialty tool. You do need to use a lot of torsion to get it flush, but it does work properly
Scritto da: Donald Payne
Very nice C clamp
It's a pretty good clamp I was a little worried about the quick release but it actually works great
Scritto da: Dennis E. Sutton
Quality
I love Olympia clamps, have used them for years.
Scritto da: the ruckus
WORTHLESS
The quick release caused the clamp to bind up & make it unusable. Glad I had a backup for the break job I bought this for.
Scritto da: Grumpy Old Man
OLMYPIA-Tools have always done me right but this purchase has not gone as i had hoped, will update
They should Call these Types of C-Clamps "Quick Adjusting C-Clamps", When there is no Tension on the C-Clamp you push the Button in and Adjust it to Fit what you are clamping and then Tighten accordingly to the proper Tension for your Project - Then when done Loosen the C-Clamp like Normal with the T-Handle then when there is no Tension on it Push the Button and Pull the Threaded Rod all the way open to take it off the project you just clamped. To me "Quick Release" would make you think that all you had to do was push the Button in and it will release the Tension, from my many times using these types of C-Clamps this is Not So. These Work Great on Calipers, no more Spinning and Spinning the handle Open to fit around the Caliper and again to take it off, just push button open the C-Clamp all the way fit it around the Caliper as needed & Push the button in again and push the threaded rod all the way to the Calipers Piston and you are ready to slowly apply tension to push the piston in to Replace your Brake Pads Sadly this turned into a bad experience and the clamp did not function as it should, will update if something changes.

Zesummenhang Produiten

hot
HHIP 3901-0010 Pro-Serie 52 Stéck Spannkit, 12 mm T-Slot mat M10 X 1,5 Stécker
0.1/5

€ 281.67

HHIP 3901-0010 Pro-Serie 52 Stéck Spannkit, 12 mm T-Slot mat M10 X 1,5 Stécker
0.1/5

€ 281.67

hot
Speakman S-3219 Wandmontage duebel Fouss Pedal Ventil fir Gesondheetsariichtungen poléiert Chrom
4.1/5

€ 755.40

Speakman S-3219 Wandmontage duebel Fouss Pedal Ventil fir Gesondheetsariichtungen poléiert Chrom
4.1/5

€ 755.40

hot
Hard-to-Find Befestigung 014973152710 Këssen Support Clamps, 1 x 1/2, Stéck-8
3.1/5

€ 36.19

Hard-to-Find Befestigung 014973152710 Këssen Support Clamps, 1 x 1/2, Stéck-8
3.1/5

€ 36.19

hot
Wilton 106 Heavy-Duty C-Clamp, 5-3/4 Ouverture, 2-1/2 Hals (14156)
3.4/5

€ 204.51

Wilton 106 Heavy-Duty C-Clamp, 5-3/4 Ouverture, 2-1/2 Hals (14156)
3.4/5

€ 204.51

hot
BESSEY CM50 Drop Forged, C-Clamp, 5 In., Black
3.5/5

€ 31.71

BESSEY CM50 Drop Forged, C-Clamp, 5 In., Black
3.5/5

€ 31.71

hot
BESSEY, EHKXL24, 24 Zoll, 600 lb Spannkraaft, EHK Serie, Trigger Clamp 600 lb Kraaft 24 Zoll.
3.8/5

€ 92.92

BESSEY, EHKXL24, 24 Zoll, 600 lb Spannkraaft, EHK Serie, Trigger Clamp 600 lb Kraaft 24 Zoll.
3.8/5

€ 92.92

hot
Yost Vises ADI-6 Heavy Duty Vise
3.5/5

€ 638.74

Yost Vises ADI-6 Heavy Duty Vise
3.5/5

€ 638.74

hot
BESSEY, EHKXL06, 6 Zoll, 600 lb Spannkraaft, EHK Serie, Trigger Clamp 600 lb Kraaft 6 Zoll.
3.8/5

€ 73.50

BESSEY, EHKXL06, 6 Zoll, 600 lb Spannkraaft, EHK Serie, Trigger Clamp 600 lb Kraaft 6 Zoll.
3.8/5

€ 73.50

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen

Kategorien

All d'Kategorien
Menu Kategorien Noper Weenchen

Menu