Orbit 35809 PVC-Lock Release Tools, gemëscht

Name: Orbit 35809 PVC-Lock Release Tools, gemëscht
Brand: Orbit
SKU: 0046878358096
Price: 26.67 EUR
Availability: InStock

Brand:Orbit

3.4/5

€
26.67

Vum Hiersteller Orbit ass Nordamerika déi éischt Firma fir Wunnbewässerung. Mat enger Präsenz an iwwer 180 Länner a 6 Kontinenter, bidde mir dee komplettsten Ökosystem vu Léisungen iwwer Schlauchkran, Schlauch, Schlauchend, ënnerierdesch, Drëps, Niwwel a Gaartschutz. Fir iwwer en halleft Joerhonnert hu mir d'Industrie an innovative Léisunge gefouert, iwwer 100 aktive Patenter a vill Industrie Unerkennungspräisser sammelen. Vum PVC-Lock, Blu-Lock an Drip-Lock, déi en aussergewéinlech schnelle Wee sinn fir Sprinkler-Päif an Drëpsleitungen ze verbannen, bis zu eisen technologesch fortgeschratten, beschte verkaaften B-hyve Smart Controller, mir hunn d'Industrie moderniséiert, agestallt Standard fir Wunnbewässerung beschten Praktiken, a mécht Outdoorbewässerung effizient fir Stéit ronderëm d'Welt. Hydro-Rain ass de modernste kommerziellen an landwirtschaftleche Géigepartei vun Orbit, mat BUILT FIR SPEED Offeren déi speziell fir professionell Optraghueler a Gromperen konstruéiert sinn. Zesummen bilden Orbit an Hydro-Rain eng Geschäftsunitéit an der Gardena Divisioun vun der Husqvarna Group, zesumme mat de weltgréisste Wunnbewässerhersteller. Well den Zougang zu sécherem frësche Waasser fir Gemeinschaften eng global Prioritéit ass, si mir houfreg eist Engagement ze bestätegen fir en ëmfaassenden Ökosystem vu schlau Léisungen ze liwweren, déi Uwendungen VUN FAUCET BIS Bauerenhaff ofdecken, wéi mir kontinuéierlech d'Visioun verfollegen fir d'WËSCHT WËLLT WASER z'änneren. .

Betrag

An de Weenche leeën Kaaf elo

EAN: 0046878358096

Kategorien Tools & Home Verbesserung, Power & Handwierksgeschir, Handwierksgeschir, Tool Sets,

Fittings, déi un exzessive Waasserdrock an / oder Waasserhammer ausgesat sinn, kënne schwéier ze läschen. Benotzt fir PVC Sprinklersystemer z'installéieren - entworf fir ze benotzen mat Schedule 40, Schedule 80 a Class 200 PVC. Schafft op 1-Zoll an 3/4-Zoll PVC-Lock Armaturen. Verëffentlecht PVC-Schloss Armaturen aus PVC Päif.

Brand	Orbit
Color	Mixed
Exterior Finish	PVC
Item Dimensions LxWxH	1.75 x 3.9 x 7.25 inches
Item model number	35809
Item Weight	0.01 Ounces
Manufacturer	Orbit
Material	Pvc
Number of Pieces	1
Product Dimensions	1.75 x 3.9 x 7.25 inches; 0.01 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Shemers

3/4" works great, 1/2" not so much

I used the 3/4" fittings to pressure test a pvc assembly that was going to be hard to get to once installed. I used a cap on one end and a threaded adapter on the other. I bought a hose adapter that fit on the threaded end so that I could pressurize it. After testing I was able to remove the cap and the threaded adapter using the removal tool. The connectors went on and came off easy. They don't leak at all. That's the good news. The bad news is that when I tried something similar with 1/2" pvc the connector went on and sealed just as well, but they do not come off very easily. I was able to get the removal tool all the way in, but the little metal teeth in the connector were still dug in to the pvc. I was able to get the connector off by twisting and pulling, but it chewed up the end of my pipe. I have tried multiple fittings and 2 sets of release tools with the same result. I have also tried putting the connector on and removing immediately without ever pressurizing to see if the problem was from over pressurizing. It still scored the end of my pipe. I was hoping that I could use these to make a temporary seal that I could latter remove and glue a permanent connector in its place. With the pipe so badly scored, I think I will have to cut off the end first to get a good glue seal. I have not tried the 1" size yet.

Scritto da: S.S.

Very Useful Tool!

Set up a backup, satellite sprinkler system from the spigot in the backyard. When disconnecting that system in the late fall, this tool makes it a cinch. slide down into the connector and turn and you're disconnected in seconds. Everything reconnects with no issue, either. Worth the minor investment to save a ton of time.

Scritto da: LLP

Must have for Orbit pvc connectors

We used a few of the Orbit 3/4 quick couplers for non pressure pvc line. They are very easy to use and seem to work great. The Orbit release tool is a pretty much must have if you ever plan on taking them apart again. Only used the 3/4 tool so far. The tool is easy to use and releases the connecting barbs without any trouble

Scritto da: Hazard Area

Worked Great

I was fixing a 3/4" underground pipe with the 18" locking flexible pipe sold on this site, and wanted these tools in case I made a mistake and wanted to remove the flexible pipe. I didn't have to use the lock release took, but did use the deburring tool and it worked like a champ. What sold me on this kit is that they threw in the deburring tool with the lock release tools, which I thought was great.

Scritto da: 1 Bama Boy

Get the job done!

Perfect tools for the job. Worked on 3/4 PVC irrigation plumbing. Had my leak fixed in 15 minutes.

Scritto da: Theguyoverthere

Works great

I messed up and tried using a PVC Lock Slide to patch a puncture in my black 1 inch sprinkler line. It didn't work at all. The Orbit 35809 PVC-Lock Release tool set worked great and as advertised. It take a bit of practice to finagle it all the way into the lock slide side, but once pushed all the way, the pipe came right out. Now I can return the wrong part and get the correct one.

Scritto da: Judy Caunter-Crawford

Consider two sets of you need to replace an manifop

They work great. Use it to attach manifolds so we do not need to cut pipe when replacing manifolds. But we needed two to release manifold since the pipes are inches away from each other

Scritto da: S Moore

Do not mistake for eco-lock release tools

I mistook these for eco-lock release tools... not compatible.

Scritto da: Groot

Built with cheap plastic around the extremely sharp flimsy tin/stainless ...

Built with cheap plastic around the extremely sharp flimsy tin/stainless they use to slide into the fitting. For the most part, I ended up cutting off the existing fitting and putting a new one on rather than using these. The plastic started peeling off after first use.