POWERTEC 71539 Drill Press Table 14-Zoll x 24-Zoll w/komplett Aluminium Multi T-Track Zonksystem - Professionell Holzbearbeitungsserie

Brand:POWERTEC

3.1/5

€
206.93

Aféierung vum Drill Press Table a Multi T-Track Hardware Set vum POWERTEC.Set Enthält: (1) Table Top - Drill Press Accessoir deen et erlaabt eng séier a sécher Montage op déi meescht Stiler a Gréissten (enthält 12 "oder méi) vun Drill Press Dëscher (1) Multi t-Track Fence - Premium Aluminiumextrusioun. Besëtzt e sécheren Interface mam Dësch, deen zréck an zréck rutscht fir d'Bedierfnesser vun all Projet ze passen. Entworf fir Iech ze hëllefen Är eegen Aarbechtsstatiounen, Fiederen, Jigs an Armaturen ze personaliséieren an ze kreéieren.(1) Removable/Adjustable Insert – Erlaabt de Benotzer komplett duerch hiert Werkstéck ze bueren ouni den Dësch ze beschiedegen(1) 71367 POWERTEC 3” Fence Flip Stop – Features a pre-montéiert, userfrëndlech Design mat engem Aarm, dee bequem erofklappt wann néideg a verstoppt bleift wann net am Gebrauch, plus et rutscht op an erof all Zait mat engem Top-montéierten T-Streck a schléisst bequem iwwer Knäppchen erof. Den Arrêt kann vun der Inboard an der Outboard Positioun ëmgewandelt ginn an de Fliparm kann fir déi riets oder lénks Säit vum Kierper gesat ginn.(2) L-Form Multi T-Track Brackets - Erlaabt Iech eng sécher, senkrecht Verbindung wann Fiederen an aner jig Ariichtungen op Är t-Slot Accessoiren befestegt, Multi-t-Gleiser an woodworking Uwendungen. Schafft exklusiv mat der POWERTEC a passt Rockler T-Track Systemer.(4) 71083 POWERTEC T-Streck Hold Down Clamps - Features ergonomically designed 5 star knobs, non-marring clamping pads, and a high tension clamping capacité. Bitt excellent clamp Aktioun fir Är t-Streck System Assemblée.(4) Stellschrauwen - Benotzt als inserts, dëser Installatioun Hardware hëlleft sécher an etabléieren der Insert op den Dësch erop. Kann mat engem Phillips-Kapp Schrauber ugepasst ginn.

Keng Unitéiten verfügbar

EAN: 0843441108962

Kategorien Tools & Home Verbesserung, Power & Handwierksgeschir, Power Tool Parts & Accessoiren, Jig Accessoiren,

SET enthale: Drill Press Dësch Top, T-Streck Zait, T-Streckklemmen, Zait Flip Stoppen, L-förmleche Gleisklammern, Knäpper, Inserts an aner Installatioun Hardware. PROJECT VERSATILITY: Kommt mat enger Sortiment vu Holzbearbeitungsklemmen, justierbaren Inserts a Knäppercher, déi d'Kontroll zréck an Är Hänn setzen - wat Iech erlaabt Äert Ausrüstung unzepassen fir Är spezifesch Projetsufuerderungen an Ziler z'empfänken. MULTI T-TRACK FENCE: Laser ätzt Skala, 24 Zoll laang mat aussergewéinlecher Richtegkeet - Reversibele Profil fir lénks oder riets Mooss), 3/4 Zoll ausser (am Zentrum), 3/4 Zoll déck an 3 Zoll héich. Dëst multi-funktionell Outil akzeptéiert déi meescht üblech Accessoiren Befestigungen 1/4 "T-Bolzen, 5/16" T-Bolzen an 1/4 "Hexbolten. UNIVERSAL TABLE TOP: Erlaabt eng séier a sécher Montage op déi meescht Stiler a Gréissten (enthält 12 Zoll oder méi) vun Bohrpress Dëscher. FUNKTION: Dëse Bohrpress Kit bitt Iech eng villsäiteg Sammlung vun Bohrpress Tools an Accessoiren wann Dir Är Bohrpress op den nächsten Niveau braucht. Hëlleft liwwert berufflech sicht Resultater fir vill vun Äre woodworking, Plastik oder Komposit Bueraarbechten an metallworking Uwendungen.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	POWERTEC
Customer Reviews	4.0 4.0 out of 5 stars 81 ratings 4.0 out of 5 stars
Included Components	Drill Press Table 14-Inch x 24-Inch w/Complete Aluminum Multi T-Track Fence System
Included Components	‎Drill Press Table 14-Inch x 24-Inch w/Complete Aluminum Multi T-Track Fence System
Item model number	‎71539
Item Package Quantity	‎1
Item Weight	‎14.65 pounds
Manufacturer	‎POWERTEC
Part Number	‎71539
Product Dimensions	24"L x 14.56"W x 2.95"H
Product Dimensions	‎25.47 x 14.56 x 2.95 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: G. Algier

Fits well, but insert non-standard

I purchased this for use on a Wen 4214T drill press. It fits well. No problems clamping it, the adjustment crank clears the back of the table. Everything seems to be fine, except the insert. I was going to cut a few extra inserts before this one gets chewed up, but the MDF is a non-standard thickness. Thicker than 1/4 inch, but thinner than 1/2 inch. It isn’t even a whole metric size. I will probably have to make replacements from 1/2 inch lumber that I plane down to size. So much for cheap MDF.

Scritto da: Dennis Beaudry

Get what you pay for.

This was not the cheapest or 'pro quality', so I didn't expect to much but paid alittle more hoping for sturdy construction. Would have been a 2 star due to tightening the underneath clamps, the railing screws popped right out. Upon inspecting the other screws they were not tight. I had larger flat head screws, and glue, so repaired flaw myself, as I neede to use it when it was delivered. I was attaching to a smaller drill press (8") and it worked without the modification I was expecting. For this I gave it 1 more star. The railing system does work well. I would like to have seen the top project hold downs to be longer and will have to make some myself. The larger table is fine, but poor quality pressboard. This is inexpensive table that will not take much pressure, use on smaller projects, or on a secondary drill press. This is where mine will be or I would have returned it.

Scritto da: Dj Voodooman

Good Table after...

Love the table . although the width of both tracks need to be almost even to mount correctly on drill press. I had to install mine upside down no problem to me honestly other it might be.. Yep had to change screws in track.. no issue added glue as well not it does not move. Bought a second fence and wow that was like super help and having a third set of hands As my first table like this. So far it is very good. I gave 4 stars because they used to small a screw in securing the T tracks.

Scritto da: JF

Disappointed but hopeful

One of the t-tracks began to break away from the table as I tightened a clamp. My solution was to (1) glue the t-tracks in their slots and (2) replace the 1/4" inch wood screws with 3/4" 8-32 flat head bolts with nuts, drilling through the table and countersinking the holes. This modification should suit my light, occassional use. I'm sure there are better drillpress tables out there for the money ($120), but I try to avoid products made in mainland China if I can. Powertec products are supposedly manufactured in Taiwan.

Scritto da: Kindle Customer

Very good

Well worth the price compared to the cheap ones.

Scritto da: Latigo

Won't fit all drill presses

This table blocks the crank for the height adjustment on my press. It seems like a nice enough table, but it would be a pain to remove every time I need to adjust the height.

Scritto da: Dave

Great Purchase!!!

I was looking at drill press tables and t-tracks for a new workbench I'm building and got lucky! I didn't want to put a WEN table on my 12" BILT HARD! Anyways, I am really grateful to come across PowerTec's t-track systems. I just started on my VERY 1st, personal (yes, it's not in someone's shop), track system and like the quality, value, and options. I made the mistake and purchased 24" sets from another company and totally regret it. The pics show better. Nevertheless, I am happy with Powertec. Great Job!

Scritto da: kim

Great buy

Gave it to my son for Christmas. He said it was great.

Scritto da: JAGO

'Es bueno pero…

Es un buen producto pero no se acopla a todas las marcas marca realice unos cortes y lo ajuste