0
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister

Proxxon 27028 Drill Chuck mat Schiebermüsse fir Schwäif vum DB 250, Sëlwer

Brand:Proxxon

3.5/5

€
42.53

PRODUKTBESCHREIWUNG Drill Chuck mat Rutschhülse fir d'Stéck vum DB 250. Klemmt bis 13/64 (5,0mm). Gëtt op der Plaz vum rotéierende Réckzentrum agebaut. D'Fütterbewegung entsteet aus dem Rutsch vum komplette Schwanzstéck. VUN DER Produzent Proxxon Bohrchuck fir den Heckstock fir den DB250, Nummer 37020 Mikro Holzdrehdrehmaschinn. Proxxon däitsch Präzisioun konstruéiert, Spannkapazitéit 13/64 Zoll (5mm). Et ersetzt de Live-Zentrum. D'Fütterbewegung entsteet aus dem Rutsch vum komplette Schwanzstéck.

Keng Unitéiten verfügbar

EAN: 0785533493177

Kategorien Tools & Home Verbesserung, Power & Handwierksgeschir, Power Tool Parts & Accessoiren, Dréibänk Parts & Accessoiren, Accessoiren,

Power-Sand-Blaster-Accessoiren. Héich Qualitéit Präzisioun Tools. Niddereg Gewiicht a schlank Design, ouni jeemools Kompromëss Leeschtung. Roueg, präzis a Schwéngungsfräi fir Middegkeet gratis ze benotzen.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Proxxon
Color ‎Silver
Compatible Devices Lathe
Customer Reviews 4.5 4.5 out of 5 stars 225 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎27028
Item Package Quantity ‎1
Item Weight 0.18 Pounds
Item Weight ‎2.88 ounces
Manufacturer ‎Proxxon
Part Number ‎27028
Product Dimensions ‎3.74 x 3.31 x 2.17 inches

3.5

13 Review
5 Star
67
4 Star
21
3 Star
7
2 Star
2
1 Star
3

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: Hovey Corbin
Conducting baton handle machining
My son and I make custom conducting batons, and I needed a drill chuck for My Proxxon micro-lathe to allow me to drill precisely centered holes in the end of the baton blanks during the machining process. The drill chuck fits my micro-lathe perfectly and now I can drill precise holes in the baton blanks with ease so that the balance weight I install is perfectly concentric. I am happy with this purchase
Scritto da: Wisecarver
Handy but can be improved.
It's very handy but I do wish it was keyed, not the spin-tight like Dremel has. Nice thing is, it comes off the shaft, so this does allow me to put a better chuck on it, still a good price.
Scritto da: Jeremiah Warthog
Drill chuck with sleeve for Proxxon Micro Lathe
This is necessary for many lathe functions, such as drilling concentric holes in a workpiece. It works as intended and is of reasonable quality. Easy to install and remove. Utilitarian item; no complaints.
Scritto da: xfourpower
Four Stars
works like a charm
Scritto da: Amazon Customer
Good for holdin small number size drill bits
Works well with my new proxxon lathe
Scritto da: Agostinho Araujo
Five Stars
Awesome quality, I do recommend this product. Good deal.
Scritto da: C.C.
Four Stars
Works fine!
Scritto da: Will
You need it already
Well designed and built. Perfect accessory for your Proxxon lathe. Buy one already!
Scritto da: Hopjumpskip
Drill chuck is ok, but the Proxxon Micro system isn't
I wanted to use this on some beech wood pieces I was making on the Proxxon Micro 250 lathe. But the tail stock is so wobbly, even after putting in alum tape. And the motor doesn't have enough power to drill even a small hole with a brand new quality drill bit. I even tried tapping in a hole to break the wood fibres. The chuck itself is fine as it is, but the motor power + wobbly alum setup doesn't make for a good drill. I'm sure this is fine on softer woods like limewood etc, just not hard woods, especially going into end grain. I'll have another go at it and try to find a way, but I'm not that hopeful. UPDATE: Haven't tried using it as a drill chuck again yet, but it's actually great on the other side to hold stock instead of using the crappy collets. Just used one of the collets that fit and voila! I can easily remove a piece by hand to check it over, or swap for another without fussing with those two spanners. I've only used this on limewood, but I'll have a go with something harder to see if works, but it should be fine. Works better this way than an actual drill chuck.
Scritto da: Kirk Stringer
Great for my mini lathe
Bought to use with my mini watch makers lathe, fits perfect and does exactly what I want.
Scritto da: Sanda
Very useful, nice quality
This chuck is actually for a Proxxon lathe, but my issue wasn't to do with a lathe. I needed to drill holes only 0.75mm diameter, but my usual chuck couldn't grip drills that small. So I got this little chuck and fitted it into the normal standard one!
Scritto da: Ernie S.
The drill chuck is ready for use out of the box.
It is a part that works very well. Drill bits are held true and the device is perfect for the price. I have used the chuck for accurate model work and have no complaints.
Scritto da: Amazon Customer
Quality Item
Arrived on schedule. Well packaged and exactly as described.

Zesummenhang Produiten

hot
Powermatic Toolrest, lénks (6294751)
3.4/5

€ 307.89

Powermatic Toolrest, lénks (6294751)
3.4/5

€ 307.89

hot
WEN LA4275 2.75-Zoll 4-Jaw Self-Centering Keyed Dréibänk Chuck Set mat 1-Zoll x 8TPI Fuedem
3.5/5

€ 126.92

WEN LA4275 2.75-Zoll 4-Jaw Self-Centering Keyed Dréibänk Chuck Set mat 1-Zoll x 8TPI Fuedem
3.5/5

€ 126.92

hot
HHIP 3402-0822 6 Zoll Ronn Magnéitesch Chuck-Fine Pole 6
0.1/5

€ 869.14

HHIP 3402-0822 6 Zoll Ronn Magnéitesch Chuck-Fine Pole 6
0.1/5

€ 869.14

hot
PSI Woodworking PKM-BL Screw-On Pen Mandrel 1 x 8tpi 1 x 8tpi Schrauwen-On
3.6/5

€ 60.73

PSI Woodworking PKM-BL Screw-On Pen Mandrel 1 x 8tpi 1 x 8tpi Schrauwen-On
3.6/5

€ 60.73

hot
USST RKT-8200A Aluminium 6061 T6, Ronn Chuck Jaws fir 8 CNC Dréibänk Chucks, 2 Héich (Set vun 3 Stécker)
4.1/5

€ 180.00

USST RKT-8200A Aluminium 6061 T6, Ronn Chuck Jaws fir 8 CNC Dréibänk Chucks, 2 Héich (Set vun 3 Stécker)
4.1/5

€ 180.00

hot
USST KT-8150P Steel Soft Chuck Jaws fir 8 CNC Dréibänk Chucks, 1.5 Tall (Set vun 3 Stécker)
4.1/5

€ 100.03

USST KT-8150P Steel Soft Chuck Jaws fir 8 CNC Dréibänk Chucks, 1.5 Tall (Set vun 3 Stécker)
4.1/5

€ 100.03

hot
HHIP 3900-5458 Quick Change Tool Post, KDK Style-200 #200 Serie Set
4.1/5

€ 603.60

HHIP 3900-5458 Quick Change Tool Post, KDK Style-200 #200 Serie Set
4.1/5

€ 603.60

hot
USST KT-10200AP Alum T6061 Spitz Soft Chuck Jaws fir 10 CNC Dréibänk Chucks, 2 Héich (Set vun 3 Stécker)
3.6/5

€ 84.76

USST KT-10200AP Alum T6061 Spitz Soft Chuck Jaws fir 10 CNC Dréibänk Chucks, 2 Héich (Set vun 3 Stécker)
3.6/5

€ 84.76

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen

Kategorien

All d'Kategorien
Menu Kategorien Noper Weenchen

Menu