Red Devil 08090I RD PRO 100% Hëtztbeständeg RTV Silikon Dichtstoff, e waasserdichte a waasserdichte Klebstoff fir Héichheizung, 10,1 Oz. Tube, Rot, 12-Pak 12 Pack 10,1 Oz

Name: Red Devil 08090I RD PRO 100% Hëtztbeständeg RTV Silikon Dichtstoff, e waasserdichte a waasserdichte Klebstoff fir Héichheizung, 10,1 Oz. Tube, Rot, 12-Pak 12 Pack 10,1 Oz
Brand: Red Devil
Price: 402.15 EUR
Availability: InStock

Brand:Red Devil

3.5/5

€
402.15

FIR BEST RESULTATER: Ier Dir de Dichtstoff opdroen, läscht all al Kaulk, Schutt oder aner Reschter, déi mat der Adhäsioun stéieren, a vergewëssert Iech datt de RTV Dichtstoff op propperen, dréchene Flächen benotzt gëtt fir bescht Resultater. 50-JOER PRODUCT DURABILITY GARANTIE: Hänkt op Red Devil's Heat Resistant 100% Silicone Sealant fir Är Projeten déi mat extremer Hëtzt ëmgoen; d'Dichtstoff bleift flexibel a widderstoen Schwéngungen mat beandrockender Adhäsioun a bitt e waasserdichte Dichtung haltbar fir 50 Joer. WËLLT NET KRASCHEN, SCHRËNNEN ODER PELEN: Mat sengem net-slumpende Design, waasserdichte a waasserdichte Formel wäert de RTV-Dichtstoff d'Elementer widderstoen a wäert net knacken, schielen oder schrumpfen fir eng zouverlässeg Dichtung déi fir Joer dauert. WEERSTAT EXTREME WÄRTEBELÉIT: Den RD Pro Industrial Grade Hëtztbeständeg Dichtstoff ass mat Eisenoxid formuléiert fir extrem Hëtztbelaaschtung ze widderstoen a widderstoen Temperaturen vu 600 Grad Fahrenheit (intermittéiert) & 500 Grad Fahrenheit (konstant). ROUT FARWER FIR EINFACHEN IDENTIFIKATIOUN: Ideal fir an industriellen Uwendungen ze benotzen, den Hëtztbeständeg Dichtstoff kënnt a rout a kann op Uewen Rimmer, Industrieofen, Uewenfenster, Trocknenofen, Kessel, gebrannt Heizungen, Flanged Pipe Joints, Access Dieren, Heizung benotzt ginn Elementer an Apparater, a Flues op Gasapparater.

Betrag

An de Weenche leeën Kaaf elo

EAN:

Kategorien Industriell & Wëssenschaftlech, Klebstoff, Dichtstoff a Schmiermëttel, Silikon,

Brand	Red Devil
Color	Red
Item Weight	10.1 Ounces
Material	Silicone
Style	10.1 oz

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Aiden

Did it's job well

Needed it to temporarily seal an exhaust flange after replacing the front pipe. Mating surface on existing center pipe was corroded badly, and I couldn't get a seal. This did the trick while I waited for a new center pipe to arrive.

Scritto da: Oleg Simakoff

Perfect for tough jobs

Nothing else I tried from Lowe's or home Depot worked. This did the job! I need to glue the ceramic cooktop to the metal stove frame. I'd say my only issue is that the color is red. Other than that minor thing, I am very happy with the outcome

Scritto da: Mortimer

Good stuff

So far so good. I used this to re-attach a piece of stone veneer very near the face of my fireplace, was concerned that due to the heat other glues wouldn't stand up. During this time of year, we have the fireplace going pretty much 100% of the time. I have a thermometer on the blower grate and it often reaches close to 400 degrees; the brick I needed to attach was only a few inches away from the grate. I let the fire die down, squirted a couple blobs on the back of the brick and stuck it on. It's tacky enough the brick held itself in place while drying. Been over a week now and it's still attached firmly and we've had the fireplace going 24/7. It works! **Update 4 months later** Still holding strong! We have had the fireplace cooking non-stop since I put this stuff on. No signs of loosening up at all. **Update 3 years later** Bricks adhered with this stuff are still stuck on, it's awesome. I just came here to order another tube for a different brick that fell and thought I would update this review.

Scritto da: Amazon Adam

High performance seal for furnace inducer fan!

Purchased this to fix and create a new seal for a furnace inducer fan assembly. The fan assembly is the heart of the furnace in order to get it up and running. I replaced the inducer fan as the bearings were done. I used this product to create a tight seal to prevent the carbon monoxide and other fumes from entering the basement. In addition to a gasket, I used this to seal the base of the inducer fan assembly to prevent it from leaking anything. The product is the best and withstands 500 degrees temperature. A must for anyone working with a furnace or hot surface that requires additional seal protection.

Scritto da: Lulu1953

Strong easy to use

The glass on my induction eye slide off, instead of buying another. It is better then the one I originally bought!

Scritto da: milleeran

Barely withstood 400° after curing for a week

I am sure it has its applications 600° is not one of them

Scritto da: Ot

Its Caulking

Was very fluid, made it easy to apply, to motor heads.

Scritto da: SoNatStone

Great high temp adhesion, slight off-gas at first burn

I used this to adhere and fiber-cement surround to a zero-clearance direct vent fireplace, seems to be working just fine after several uses. The only issue is we noticed a smell that resembled a hot engine bay during the first couple times we ran the unit after using this product. It hasn't completely gone away, but it is lessening with time. Totally worth it though for the working temp range of the product.