SharkBite 1/2 x 3/4 Zoll MHT 45 Degree Schlauch Bibb, Quarter Turn, Push To Connect Messing Sanitär Fitting, PEX Pipe, Kupfer, CPVC, PE-RT, HDPE, 24630LF 1/2 Zoll x 3/4 Zoll. Véierel Tour

Name: SharkBite 1/2 x 3/4 Zoll MHT 45 Degree Schlauch Bibb, Quarter Turn, Push To Connect Messing Sanitär Fitting, PEX Pipe, Kupfer, CPVC, PE-RT, HDPE, 24630LF 1/2 Zoll x 3/4 Zoll. Véierel Tour
Brand: SharkBite
SKU: 0697285246300
Price: 39.61 EUR
Availability: InStock

Brand:SharkBite

3.7/5

€
39.61

MADE IN DEN USA: All SharkBite Ventile, Clips, Gelenker, an Adapter ginn an den USA hiergestallt a getest. PRÉFERÉIERT VUN DER PRO: SharkBite Tools an Armaturen entspriechen déi selwecht héich Standarde fir kommerziell a Wunneng Sanitär Uwendungen; gëeegent fir Ersatz an nei Konstruktioun Installatioun; ideal fir an enke Plazen ze schaffen. EINFACH ZE INSTALLEREN: Den innovativen Design vum SharkBite Messing Push Schlauch Bibb erlaabt eng séier an einfach Installatioun, ouni Tools, Crimpen, Klebstoff oder Löt erfuerderlech; kann an naass Linnen installéiert ginn; ewechzehuelen mat engem disconnect Clip oder trennt Stongen. VERSATILE: Messing Push Schlauch Bibbs funktionnéieren gutt mat PEX, CPVC, PE-RT, SDR-9 HDPE a Kupferleitungen; bibb Fonctiounen engem patentéiert eent-Stéck 2,4-Zoll Duerchmiesser Opriichte flange an Inlet Verbindung. SHARKBITE 45-GRAD Schlauch BIBB: Multi-Turn shut-off Krunn mat Opriichte flange an Inlet kann benotzt ginn Waasser Flux ze regléieren; kombinéiert en 3/4 Zoll Gaart Schlauch Outlet mat engem 1/2 Zoll oder 3/4 Zoll Push-to-Connect Inlet an engem 45 Grad Wénkel fir Schlauchkinks ze vermeiden.

Betrag

An de Weenche leeën Kaaf elo

EAN: 0697285246300

Kategorien Tools & Home Verbesserung, Industriell & Wëssenschaftlech, Rau Sanitär, Pipes, Pipe Fittings & Accessoiren, Pipe Fittings,

Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Color	Quarter Turn
Color	‎Quarter Turn
Connector Type	Flange
Connector Type	‎Flange
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 1,775 ratings 4.6 out of 5 stars
Exterior Finish	Brass
Exterior Finish	‎Brass
Included Components	‎45*Hose Bibb
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	2.95 x 2.44 x 2.44 inches
Item Dimensions LxWxH	‎2.95 x 2.44 x 2.44 inches
Item model number	‎24630LF
Item Package Quantity	‎1
Item Weight	‎6.4 ounces
Manufacturer	‎Cash Acme
Material	Stainless Steel, Brass, Copper
Material	‎Stainless Steel, Brass, Copper
Measurement System	‎Inch
Number Of Pieces	1
Number Of Pieces	‎1
Part Number	‎24630LF
Product Dimensions	‎2.95 x 2.44 x 2.44 inches
Size	1/2 in. x 3/4 in.
Size	‎1/2 in. x 3/4 in.
Style	‎Brass Push No Kink Qtr Turn Hose Bibb

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Amazon Customer

Surprisingly easy to install

My outside faucet snapped last fall. I turned off the water to address the problem this spring. Spring came, and I just didn't want to spend $350 to $500 to have a plumber come and install a new faucet. I discovered Shark Bite as a solution on youtube. I purchased the faucet, followed the instructions, and for less than $50 I have a new workable faucet in my backyard. No leaks....works great, and I congratulate myself for becoming a "handyman", which I'm not.

Scritto da: Rkpell

It works great. Simple

Couldn't have asked for an easier install for my shed. I get more than adequate pressure for my power washer to clean a large patio. Very satisfied. No leaks, pex throughout install.

Scritto da: Stephanie

Faucet

Average faucet

Scritto da: Hannadog

Seems like good quality

Easy to install using Pex-a

Scritto da: SueAnn Joplin

The product is as pictured.

Product is as described, and I would buy it again.

Scritto da: TexMan

SharkBite 1/2 x 3/4 Inch MHT 45 Degree Hose Bibb.

Difficult to insulate behind the flange, I had to spray foam behind the flange to avoid it freezing in harsh weather. It should come with a insulative washer. Otherwise easy to install.

Scritto da: Frank Chi

Convenient, no soldering needed, just snap in

What a great product! The true genius of this product is that it works with PEX or copper pipes without soldering. Just press it in and you are done. Anyone who has soldered pipes before knows what a pain it is to solder when there is a little bit of water left in the pipe. The water has to evaporate first before it can heat up to a temperature warm enough to melt solder. Also, when working within tight confines of a wall, it is very difficult to maneuver the flame and a heat shield so that even heat can be applied to the solder joint. Well, that is a thing of the past with Sharkbite. Why didn't I see this before? To replace my faucett, I cut the old pipe off using a pipe cutter and lightly cleaned up the pipe to remove any sharpness from the cut edge. This is extremely important because if sharp edges are left on the pipe end, it can destroy the O ring that is the only thing that is sealing the water. The shark teeth only hold the pipe in place so that it does not come off, it does not seal. Having said that, the actual installation was anticlimactic once the pipe was prepared. I simply pressed the pipe in and caulked the faucet where it touched the outside wall. And I was done. If I had to solder, it would have been a major operation.

Scritto da: Sibi Sebastian

I didn't install, but heard it was easy to

My plumber installed this and said it's like any typical Shark product. Very simple and well built. I like the oversized water handle too.

Scritto da: RJ Customer

Easy to Install But Needs a Solid Mount

Easy to install and use. The faucet I replaced had been soldered to the copper pipe and was very firm. Although it never leaked, this one would/could swivel on the pipe if turned firmly so I put an extra wood backing and attached it firmly to the wall with screws. Is working great now.

Scritto da: Skyler Ashworth

Good and easy

Good and easy to install

Scritto da: JAF

Installed on vinyl wall

Used to service hot tub on exterior vinyl wall. Works as expected.

Scritto da: Darren Round Up

Great for small jobs and do-it-yourselfers

The shark bites are always excellent. Quick and easy, no solder required, no need for a dry pipe. Just clean the end of the pipe and slip-on.

Scritto da: Jean Morin

Perfect fit, fast and easy install !

Replaced a 30 year old faucet on copper. For those wondering, the pipe entry is flush with the base so you can use that base to measure the 1” pipe length that will be inserted. Worked on first try (copper tube was carefully prepped) which is good because I can’t see how the release clip could be inserted if removal was needed (release clip can be ordered from Sharkbite)