Slide-Co N 163138 Ronn Schiebetür Pull (2pk) - Gestempelt Stahl mat Messing Finish - Passt 1-3/4" Duerchmiesser Bi-Pass Kleederschaf Dier Fanger Lächer - Universal Design - Einfach ze installéieren, Hardware abegraff

Brand:Slide-Co

3.6/5

€
26.74

PRODUKTBESCHREIWUNG Wann de Fanger op eng Kleederschaf Dier vermësst oder beschiedegt ass, ass et net nëmme schwéier opzemaachen, et ass och onsiichtlech. Mat Prime-Line's Round Finger Pull kënnt Dir séier an einfach e fuschneie installéieren! D'Dier zitt ass aus haltbar gestempelt Stol mat engem Messing Finish gebaut. Benotzt vu ville Kleederschaf Dier Hiersteller op Bi-Pass Dier Systemer, de Fanger Pull passt déi existent Hardware op Schränke uechter Äert Heem. De gestempelt Stol Kleederschaf Pull ass kompatibel mat Bypass Kleederschaf Dieren ¾ "bis 1-3 / 4" décke. Installatioun ass séier an einfach mat all Hardware abegraff. D'Dier zitt passen en 1-3/4 "Mortise an der Kleederschafdier a ginn duerch zwee kleng Nägel op der Plaz gehal. Wann se agepaakt ass, ass et 2 Zoll Duerchmiesser. All Package enthält zwee Schiebetüren a véier Neel. VUM Produzent Dëse Kleederschaf Dier Pull Handle ass aus Stol konstruéiert a kënnt a Messing fäerdeg. Et huet en Duerchmiesser vun 1-3/4 Zoll an ass einfach mat 2 abegraffen Neel op der Plaz gesat. Dëse Stil Grëff gëtt vu ville Kleederschaf Dier Hiersteller benotzt.

Betrag

An de Weenche leeën Kaaf elo

EAN: 0078874631385

Kategorien Tools & Home Verbesserung, Hardware, Dier Hardware & Schleisen, Pocket & Bifold Dier Hardware,

Fir all Dimensiounsinformatioun kuckt w.e.g. op d'Linnkonscht a vergläicht mat Äre Bedierfnesser ier Dir kaaft. FIR BI-PASS WARDROBE DOORS - De gestempelt Stol Kleederschaf Pull ass kompatibel mat Bi-Pass Kleederschaf Dieren ¾" bis 1-3/4" déck. EASY INSTALLATION - Installatioun ass séier an einfach mat all Hardware abegraff. D'Dier zitt passen en 1-3/4 "Mortise an d'Schafdier. Den Pull gëtt vun zwee klengen Nägel op der Plaz gehal. Wann se agepaakt ass, ass et 2 Zoll Duerchmiesser. UNIVERSAL DESIGN - Benotzt vu ville Kleederschaf Dier Hiersteller op Bypass Dier Systemer, de Fanger Pull passt mat der existéierender Hardware op Schränke uechter Äert Heem. INKLUDERT - All Package enthält zwee Schiebetüren a véier Neel. All Pull gëtt vun zwee Nägel op der Plaz gehal. Ersetzen CLOSET DOOR PULL - Ersetzt einfach e beschiedegten oder fehlende Kleederschaf Dier Pull mam Prime-Line säi ronnen Fanger. D'Pull ass aus gestempelt Stol mat engem Messing Finish gebaut.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Slide-Co
Brand	‎Slide-Co
Color	Brass
Color	‎Brass
Customer Reviews	4.5 4.5 out of 5 stars 593 ratings 4.5 out of 5 stars
Exterior Finish	Brass
Exterior Finish	‎Brass
Finish	‎Brass
Finish Type	‎Brass
Handle Material	‎Alloy Steel, Brass
Handle Type	‎Pull Handle
Is Discontinued By Manufacturer	‎No
Item model number	‎163138
Item Package Quantity	‎1
Item Weight	‎0.8 ounces
Manufacturer	‎Slide-Co
Material	Steel
Material	‎Steel
Metal Type	‎Brass
Number of Items	‎1
Part Number	‎163138
Product Dimensions	0.31"L x 1.75"W
Product Dimensions	‎0.31"L x 1.75"W
Product Dimensions	‎1.75 x 1.75 x 1.75 inches
Shape	‎Round
Size	‎1-3/4 in.
Warranty Description	‎Goods are warranted against manufacturing defects for 1 year. In no case is ime-Line responsible for user related damage or damage incurred during installation. Warranty is void if oducts are subjected to abnormal conditions, misapplication or abuse.

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Maria Keith

Perfect fit

Fits the opening perfectly, nice update from ugly brass ones

Scritto da: HELP ME, HELP YOU!

Perfect Size & Shape

It's not that easy to find something like so I must give this a five star. It even WORKS with magnets so that's just the icing on the cake! IF you're the creative type you'd know what I mean.

Scritto da: WW

Hard to find size in stores

I took on the unenviable task of refinishing, recycling some old oak wood closet doors for our house. I've been doing this type of work for around 15 years. I went to the local home improvement stores and found these round finger pulls to fit in the existing spaces (filled with rotted out plastic pulls). It was a mistake that's very uncommon for me. I didn't even realize these come in different sizes. The ones I bought were over 2" and wouldn't even try to fit in the existing spaces. Came here to Amazon and there they are, the 1 3/4" satin nickel pulls. Price was quite a bit higher than buying the standard (in 2016) size, but I wanted to keep the doors as authentic as possible. Turned out to be a great buy. The spaces measured 1 3/4", but with existing rotted plastic, I had to pry out the old pieces and even then, these 1 3/4" pulls were a very snug fit. If I could give you any installation advice it would be to try and get one piece into the space then start pushing. They popped in well and are very snug. I'm guessing someone 50 years now will be cursing me as they try to resurface, recycle the doors. We bought a total of 10 and all 10 worked very well, no inconsistencies between them.

Scritto da: GWM

Nice Door Pull, but product information is incorrect.

This is a nice quality steel door pull with a classy antique bronze finish. My wardrobe closet door now looks much nicer as I replaced two decades-old, cheap plastic door pulls with these and the difference in the look of the door is night and day. They really class up the look of my wardrobe closet door! However, I must point out that the product information in both the Amazon listing and the actual product packaging is incorrect. The product information states "Includes 2 Pull Handles and 4 Nails" and "Sets in place with 2 included nails". This is incorrect as no nails are included in the package nor are there nail holes in the door pulls to insert the nails through. This did not end up being an issue with me as the door pulls friction-fit tightly into the closet door holes and therefore nails were not needed. However, this may not be the case for others who purchase these so the product information should be corrected immediately.

Scritto da: Mrs.C.

Nice replacement

Looks way better than the tan plastic ones that were in the doors originally. Didn't have the strength to push them in so I had to use a wood block and hammer to pound them in (I don't own a rubber mallet). They should stay put and and function as intended.

Scritto da: Casey B

Easy to install - just pop them in place and you’re done!

Looks great and very easy to install. This was a simple repair/update that cost less than $6 and took about 5 minutes to do. The sliding closet doors in our guest room had cheap plastic door pulls that were covered in paint. I pried out the old door pulls with a screwdriver and removed the glue underneath. Then I just popped in the new door pulls. They don’t have nails to secure them; There are a few small raised indents around the edge to hold the pulls in place. They are fairly snug, but I’m going to add a little glue underneath to make sure they stay in place. I was so happy with these that I immediately ordered another set for my daughter’s closet.

Scritto da: TodPkg

I did my best to center them in the hole

These Finger Pulls were used to update sliding closet doors in a bathroom. They were the same size as the Finger Pulls that they replaced. I thought that I was going to have a problem installing them because they seemed quite tight. I did my best to center them in the hole, but they would barely seat down into it - maybe only 1/16". Another reviewer suggested using a dish towel and a rubber mallet. That did the trick, except 6 or 7 fibers from the dish towel became trapped under the rim which had been "sealed" against the closet door - I had to carefully cut them away so that they didn't show. For the last two handles to be installed I switched to a dry DISH CLOTH (not dish towel). No fibers were trapped under the rim this time, and the finish of the Finger Pull was not marred either.

Scritto da: Quintster

Nice choice for sure!

Perfect size and just the right color for the sliding doors we installed in our closets. Could not be more pleased with the quality either. You will need a hole saw bit for your drill to make the holes obviously so make sure you order one of those, too! We put them on both the inside and outside of the door. I was just going to do exterior since they are closet doors and not like a bathroom pocket door. My wife wanted both sides done and she was right, of course. Easy grip to close from inside.

Scritto da: Ken L.

Great product

This is a great product. Good quality and it was shipped and received very quickly.

Scritto da: T. Odishaw

Happy

Used for sliding closet doors. installed well and seem to be doing the job. I would order them again. No issues with product or delivery time.

Scritto da: Bonjour

Poignée portes coulissante

Ces poignées s’agence bien