0
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister

WEN LA0009 9-Stéck MT2 Holz Dréibänk Drive a Live Center Kit mat Aluminium Case Live Zentren

Brand:WEN

3.8/5

€
142.85

Erënnert Dir Iech un wéi Dir maximal Villsäitegkeet mat Ärem Holz Dréibänk hat? Huelt Projete vun alle Formen a Gréissten mat dem WEN 9-Piece MT2 Wood Dréibänk Drive a Live Center Kit. Dëse villsäitege Set bitt eng Vielfalt vun austauschbaren Dréibänkzentren fir d'Bedierfnesser vun all Dréiapplikatioun ze treffen. Dëse Kit enthält dräi Multi-Spure Drive Zentren (5/8, 1 an 1-1/2 Zoll), dräi 4-Zänn Set Zentren (5/8, 1 an 1-1/2 Zoll), zwee Schlësselen, eent 1-Zoll x 8 TPI-Set Zentrum Kierper (M14-1,5 thread Gréisst), eent MT2 liewen Zentrum, an engem MT2 liewen Zentrum mat enger Kroun Tipp, all propper verpakt an engem kompakt, Al Droen Fall. Kompatibel mat WEN Dréibänk Modeller 3424, 3424T, 34018, 3427, 34027 an 34034.

Betrag
An de Weenche leeënKaaf elo

EAN: 0044459990895

Kategorien Tools & Home Verbesserung, Power & Handwierksgeschir, Power Tool Parts & Accessoiren, Dréibänk Parts & Accessoiren, Accessoiren,

Kompatibel mat der WEN MT2 Dréibänk Serie. Schutz Aluminium Fall mécht fir einfach Stockage an Transport. Ëmfaasst zwee MT2 liewen Zentren: eent mat Kroun Tipp an een ouni. Dräi Multi-Spure Drive Zentren moossen op 5/8 Zoll, 1 Zoll an 1-1/2 Zoll Gréisst. 1-Zoll x 8 TPI zu M14-1.5 Opriichte Adapter mécht fir einfach Installatioun an Zentrum Ännerungen.
Batteries Required? ‎No
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 344 ratings 4.7 out of 5 stars
Included Components ‎9-Piece MT2 Wood Lathe Drive and Live Center Kit with Aluminum Case
Item model number ‎LA0009
Item Package Quantity ‎1
Item Weight ‎5.32 pounds
Manufacturer ‎WEN
Package Dimensions ‎10.43 x 7.36 x 3.35 inches
Part Number ‎LA0009
Style ‎Live Centers

3.8

13 Review
5 Star
80
4 Star
14
3 Star
4
2 Star
1
1 Star
1

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: Micheal C
Better than expected
Overall well worth the money. Unfortunately it did not fit my lathe, Jet JWL-1221VS. I was only able to use 2 of the 4 hold down bolts. I'll have to make an adapter plate. If the plate provided was 9-1/2 instead of 9" my lathe would be able to use 4 hold down bolts instead of just 2. Or if the slots went all the way to the edge of the plate it would work. I'm afraid to lose too much rigidity moving the slots closer the the edge though, hence the adapter plate. As other reviewers have said the fit between the mounting platform and the column has too much of a gap, about .075 (1.905mm), which causes some slop in the fit even after tightening both bolts. I made a couple of .035 aluminum shims with holes to put between the pieces which allows for better tightening. I did use the lathe before adding the adapter plate with only 2 hold down bolts and it was still solid. I had very minimal vibration. I'm going to love using my lathe with this new stand.
Scritto da: LK
Good stand with design faults
The stand has some design faults. The horizontal bar has two issues. The first one is the bar that goes inside is too small for my Rikon midi lathe it goes in only about 1.5" which is too short. The second issue is the two bolts that are meant to lock the bar are on the wrong sides. For these issues, no matter how much you tighten these bolts, the bar bends in the middle. Because of this bending, the two vertical columns do not stay completely vertical. Solutions: make the bar that goes inside longer so that at least 2.5" inches longer and the two bolts should be placed on the top and the bottom or one bolts that goes all the way through both bars. To make it horizontal as much as possible, I slipped a thick washer (see the second photo). It worked.
Scritto da: Ashen one
I wish I had bought it sooner
Before this lathe stand, I couldn’t turn irregular shapes woods. No matter where I placed the lathe the machine was shaking so bad that I didn’t feel safe to proceed. But now is a different story. I can turn any wood no matter the shape of it. If you are on the fence like I was, please don’t hesitate to buy it. It makes turning a much better experience.
Scritto da: richard e.
Craftsman lathe stand
Very sturdy
Scritto da: John B. Havener
Impressive heavy duty, easy assembly
This stand is incredibly sturdy and fits my Wen lathe perfectly. Goes together very easily. I would give it five stars, but I think it could be improved by offering it with locking casters instead of the adjustable feet as an option. Also would like it better if I could lower it another couple of inches to offset the height of the casters I installed. Great value! Honest John
Scritto da: NanaCK
Good Quality
Very good quality. Highly recommend. Just beware that this is for a MT2 lathe not a MT1.
Scritto da: John Clark
Works for grizzly 12x18
Works well, but came missing two nuts, had to get replacement nuts and bolts, couldn't find matching nuts
Scritto da: HWeaver
Works great with my Jet Lathe
Works great with my Jet Lathe. Only install issue was on me, the bolts that purchased did not threads long enough for a tight fit, I printed some spacers and all is right, tight, and ready to roll. I combined with with a mobile base so that I can easily move it around my shop.
Scritto da: Parsha Lee
Good bang for the buck...
WEN LA0009 9-Piece MT2 Wood Lathe Drive and Live Center Kit with Aluminum Case Very good assortment. Works well. I took off 1 star only because the machining finish on some of the parts was very rough. Although admittedly, that does not affect the performance of this set. Would recommend.
Scritto da: Deb L
Super fast delivery!!!
Looks very nice in a sturdy carrying case and solid components. Haven't had a chance to use them yet but sure they will be awesome. Made in America!! And delivered well in advance of posted delivery date!!!
Scritto da: John S.
Strong and easy to move around!
Great Lathe stand. I have a 48" inch lathe but bolted a 2" x 12" five foot board across the top of the stand and then the Lathe. Works well.
Scritto da: Amazon Customer
Nice kit
This kit has a great variety of attachments for my lathe. Well made.
Scritto da: Jean-Francois Doyon
Service rapide
Très satisfait

Zesummenhang Produiten

hot
uxcell 2pcs 6mm x 200mm Metal Machine Turning Tool Rod Bar Dréibänk Ronn Stick 6mmx200mm
3.2/5

€ 25.98

uxcell 2pcs 6mm x 200mm Metal Machine Turning Tool Rod Bar Dréibänk Ronn Stick 6mmx200mm
3.2/5

€ 25.98

hot
PSI Woodworking PKM-FSM Keyless Pen Mandrel System # 2 Morse Taper
4.1/5

€ 64.14

PSI Woodworking PKM-FSM Keyless Pen Mandrel System # 2 Morse Taper
4.1/5

€ 64.14

hot
Röhm Type 300 Chip Guard fir 4 ZS-ZSU/ZG-ZGU, ZGF, ZG Hi-Tru, KRF Dréibänk Chuck (Pack vun 1)
0.1/5

€ 21.28

Röhm Type 300 Chip Guard fir 4 ZS-ZSU/ZG-ZGU, ZGF, ZG Hi-Tru, KRF Dréibänk Chuck (Pack vun 1)
0.1/5

€ 21.28

hot
USST RKT-15401A Aluminium 6061 T6, Ronn Chuck Jaws fir B215,15 CNC Dréibänk Chucks, 4 Héich (Set vun 3 Stécker)
0.1/5

€ 1170.93

USST RKT-15401A Aluminium 6061 T6, Ronn Chuck Jaws fir B215,15 CNC Dréibänk Chucks, 4 Héich (Set vun 3 Stécker)
0.1/5

€ 1170.93

hot
Shop Fox D4103 Mini Dréibänk Chuck mat Arbors
2.9/5

€ 107.96

Shop Fox D4103 Mini Dréibänk Chuck mat Arbors
2.9/5

€ 107.96

hot
WEN PM01 Hëlzent Dréibänk Pen-Dréi MT1 Mandrel
3.7/5

€ 41.50

WEN PM01 Hëlzent Dréibänk Pen-Dréi MT1 Mandrel
3.7/5

€ 41.50

hot
HHIP 3900-0423 4-Jaw Self-Centering Dréibänk Chuck Plain 3 Montage Lächer, 3 3 Chuck Gréisst
2.5/5

€ 175.89

HHIP 3900-0423 4-Jaw Self-Centering Dréibänk Chuck Plain 3 Montage Lächer, 3 3 Chuck Gréisst
2.5/5

€ 175.89

hot
Jacobs Chuck 30602 1/2-Zoll Keyed Chuck
3.6/5

€ 35.39

Jacobs Chuck 30602 1/2-Zoll Keyed Chuck
3.6/5

€ 35.39

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen

Kategorien

All d'Kategorien
Menu Kategorien Noper Weenchen

Menu