0
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister

Yost Vises UP360 Universal 6 Zoll Prisma Style Jaw Cover

Brand:Yost Vises

3.6/5

€
39.95

Spezifikatioune: 6" (152mm) Schneidekiefdeckelen Feature Groove Gréissten: Horizontal Groove 1/4, 3/8 @ 60 ° Wénkel, a verschidde vertikale Rillen: 1/4, 1/8, 1/16 a 5/8. GARANTIE: Kommt mat enger 1-Joer limitéierter Garantie an 90 Deeg Retour. SAFETY INFORMATIOUN: Mëssbrauch vu Viséier kann e schlëmmen Verletzung vun Aen, Hänn an oder aner Kierperdeeler verursaachen. Vises mussen opgestallt a richteg benotzt ginn. Virum Setup a Gebrauch, liest, verstitt a befollegt all Instruktiounen, déi am Handbuch beschriwwe sinn. YOST VISES QUALITY: All Yost Vises Tool ass konstruéiert fir héich Standarde vu Qualitéit, Stäerkt an Haltbarkeet ze hunn. Mir schätzen Qualitéit iwwer Quantitéit a fabrizéieren Produkter déi sécher an einfach ze benotzen sinn. Mir bidden Liewensdauer Tech Ënnerstëtzung fir eis Qualitéit garantéieren zréck. WEI BENOTZEN: Vergewëssert Iech datt d'Schneide sécher op d'Aarbechtsbänk montéiert ass an d'Schwenkbasisschloss sécher ass. Öffnen d'Schneider andeems Dir de Schnësshandtak géint d'Auer dréit. Setzt d'Element tëscht de serréierte Kiefer. Schéckt d'Vueze andeems Dir de Schnësshandtak mat der Auer dréit, bis d'Element an de serréierte Kiefer knaschteg ass, fuert weider ze spannen bis Dir den Artikel net méi réckelt. Maacht net ze iwwerspann well dëst Element an oder d'Vitesse kann beschiedegen. Wann Dir fäerdeg sidd um Artikel ze schaffen, dréit d'Schraubehandtak géint d'Auer fir den Artikel ze befreien. BENOTZEN MAT: D'magnetesch Kieferdeckele si super mat enger Varietéit vu Viséier: Bank Viséier, Buerpresse Viséier, Milling Viséier a sou weider; D'Distanz vun de baussenzege Kante vun de Magnete ass 3-3 / 4 ", sou datt d'Kiefdeckelen op engem 4 Viséier bis zu engem 6 Vise benotzt kënne ginn. Wann Dir e 4-Zoll Schneid hutt, schneiden d'Iwwerschoss vum Kiefdeckel einfach of. TECHNICAL SPECIFIKATIONS: 6 "(152mm) Vise Jaw Covers Feature Groove Gréissten: Horizontal Groove 1/4, 3/8 @ 60 ° Wénkel, a multiple vertikale Grooves: 1/4, 1/8, 1/16 an 5/8; (3) Dräi staark embedded Magnete halen Kieferdeckelen op der Plaz sécher versus (2) Magnete. VISE JAW COVER: Yost Vises UP360 Universal 6 Zoll Prisma Style Jaw Cover ass aus thermoplastesche Polyurethan (TPU) gemaach a kann op all Metallschneider benotzt ginn fir Holz, Metall, Plastik, Réier, threaded Artikelen sécher ze schützen all Produkt flaach oder ronn.

Betrag
An de Weenche leeënKaaf elo

EAN: 0789755001653

Kategorien Tools & Home Verbesserung, Power & Handwierksgeschir, Workholding, Handwierksgeschir, Klameren, Bench Clamps,

Spezifikatioune: 6" (152mm) Schneidekiefdeckelen Feature Groove Gréissten: Horizontal Groove 1/4, 3/8 @ 60 ° Wénkel, a verschidde vertikale Rillen: 1/4, 1/8, 1/16 a 5/8. GARANTIE: Kommt mat enger 1-Joer limitéierter Garantie an 90 Deeg Retour. SAFETY INFORMATIOUN: Mëssbrauch vu Viséier kann e schlëmmen Verletzung vun Aen, Hänn an oder aner Kierperdeeler verursaachen. Vises mussen opgestallt a richteg benotzt ginn. Virum Setup a Gebrauch, liest, verstitt a befollegt all Instruktiounen, déi am Handbuch beschriwwe sinn. YOST VISES QUALITY: All Yost Vises Tool ass konstruéiert fir héich Standarde vu Qualitéit, Stäerkt an Haltbarkeet ze hunn. Mir schätzen Qualitéit iwwer Quantitéit a fabrizéieren Produkter déi sécher an einfach ze benotzen sinn. Mir bidden Liewensdauer Tech Ënnerstëtzung fir eis Qualitéit garantéieren zréck. WEI BENOTZEN: Vergewëssert Iech datt d'Schneide sécher op d'Aarbechtsbänk montéiert ass an d'Schwenkbasisschloss sécher ass. Öffnen d'Schneider andeems Dir de Schnësshandtak géint d'Auer dréit. Setzt d'Element tëscht de serréierte Kiefer. Schéckt d'Vueze andeems Dir de Schnësshandtak mat der Auer dréit, bis d'Element an de serréierte Kiefer knaschteg ass, fuert weider ze spannen bis Dir den Artikel net méi réckelt. Maacht net ze iwwerspann well dëst Element an oder d'Vitesse kann beschiedegen. Wann Dir fäerdeg sidd um Artikel ze schaffen, dréit d'Schraubehandtak géint d'Auer fir den Artikel ze befreien. BENOTZEN MAT: D'magnetesch Kieferdeckele si super mat enger Varietéit vu Viséier: Bank Viséier, Buerpresse Viséier, Milling Viséier a sou weider; D'Distanz vun de baussenzege Kante vun de Magnete ass 3-3 / 4 ", sou datt d'Kiefdeckelen op engem 4 Viséier bis zu engem 6 Vise benotzt kënne ginn. Wann Dir e 4-Zoll Schneid hutt, schneiden d'Iwwerschoss vum Kiefdeckel einfach of. TECHNICAL SPECIFIKATIONS: 6 "(152mm) Vise Jaw Covers Feature Groove Gréissten: Horizontal Groove 1/4, 3/8 @ 60 ° Wénkel, a multiple vertikale Grooves: 1/4, 1/8, 1/16 an 5/8; (3) Dräi staark embedded Magnete halen Kieferdeckelen op der Plaz sécher versus (2) Magnete. VISE JAW COVER: Yost Vises UP360 Universal 6 Zoll Prisma Style Jaw Cover ass aus thermoplastesche Polyurethan (TPU) gemaach a kann op all Metallschneider benotzt ginn fir Holz, Metall, Plastik, Réier, threaded Artikelen sécher ze schützen all Produkt flaach oder ronn.
Brand Yost Vises
Item Dimensions LxWxH 8 x 4 x 4 inches
Material Plastic
Style Round,Magnetic

3.6

13 Review
5 Star
74
4 Star
15
3 Star
6
2 Star
2
1 Star
2

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: Rob B.
Good enough
Well constructed vise jaw covers and just what I needed to protect some delicate projects. They do that. 4 stars for the magnets being weak but I knew that going in. Every brand I researched the reviews said the magnets were marginal.
Scritto da: T. Meeks
Outstanding
I wish they made an 8 in version. They work great and as soon as I see them in an 8 in I will buy them.
Scritto da: Norman Erwin
Protect wood when using a metal vice
Very hand but the magnertsw could be a little bit stronger.
Scritto da: Josh Streeter
Decent vice jaw protector
These are built really well with several angles cut into the face of the rubber jaw to hold smaller items at various angles. These were 6” which was 1” wider than my vice and the magnets were not as strong as I’d hoped for.
Scritto da: Rachel Andreatta
pretty darn good
These things are pretty tuff, works good 10/10 would clamp again haha
Scritto da: becky
good vise accessory
The magnets do a great job holding it in place. It protects work pieces from metal vise jaws. It's a very grippy rubber that does not easily slip.
Scritto da: G. Davis
Defective Jaw, I Did Not Recommend, now I Recommend - Very Good Customer Service
First day of use, one of the three magnets came loose (there are three per side). I contacted Yost about this, and Yost responded very quickly. Yost's response - get some super glue and glue it back in place. I responded that I didn't want to repair the item as they suggested, I had no confidence that the remaining magnets would stay in their place. I did not hear back from Yost subsequently. The jaws are being returned to Amazon. I do not recommend this product. Part 2 - Received belated email from Yost, apologizing for delay in responding and advising a replacement jaw was being sent. I was pleased to receive Email and am not returning jaws after all. As a foot note - before loss of magnet I had used jaws to hold a threaded rod in place while cutting it with an angle grinder. The jaws held the rod firmly in place and did not damage the threads, an outcome which would be impossible without the jaws Part 3 Yost replaced the jaws very quickly, Yost stands behind their products. I applaud them for that.
Scritto da: Doug
Nice set of soft jaws with one design flaw
Purchased these to assist in assembling iron pipe lamps and other "industrial" home décor. Generally I like them though they are a little softer than I would prefer. It's challenging to find something that will not mar the metal while still being strong enough to hold it secure when applying a lot of torque. Like most soft jaws, these have several rare earth magnets embedded in them to hold them against the vise's metal jaws. The issue with these is that the magnets are located directly in line with the primary groove that runs the length of the soft jaws and if you clamp something round (or any shape I might guess) too tightly, you risk cracking or breaking one or more of the magnets. Rare earth magnets are very brittle by their nature. The design would benefit from having the magnets offset away from any of the clamping grooves. I only broke one of the magnets and the jaws are still completely functional but depending on your environment, having little flecks of really strong magnet material floating around could cause problems.
Scritto da: Ray Lachance
Good quality at a good price
Great vice jaw protectors. These arrived quickly at a competitive price. I have yet to out then through their paces but they seem to be well regarded from others here. Also the supplier/manufacturer seems to provide good product support and warranty. One thing I was wary of was one review I read that said the recipient had received two of the same side therefore making the protectors useless or nearly so. The slots in the protectors did not line up when used. Mine arrived as promised and look great. Time will tell. So far recommended.
Scritto da: Arturo
Buenas muelas
Es un accesorio útil cuando uno trabaja con cosas frágiles o delicadas, ya que evita marcas en las piezas al ser sujetadas para cortar, limar o ajustar. Tiene diferentes patrones de muescas que ayudan a posicionar piezas en diferentes ángulos o inclinaciones. Los imanes que tienen para fijarse a las mordazas del tornillo de banco tienen suficiente potencia para mantenerse fijas al estar trabajando. Lo recomiendo sin duda alguna.
Scritto da: Kody
Works great! Patterns line up.
So there was a review that said they don't line up... they do? They line up perfectly, you can use this to clamp multiple thicknesses of tubing it needed. It does not scratch pistol slides btw, not even Zamak airsoft slides. These are pretty nice buys, I wish they were a little cheaper but they are good enough to be worth the money.
Scritto da: Garehead
Magnet's NOT strong at all.
Just tried these out and couldn't believe they say "strong magnets" in the description. I sent them back because they would just keep falling off my Bessey 6" vice.
Scritto da: N. O. Bodie
Great purchase!
Great purchase! Outer magnets just fit inside my Craftsman bench vise. Plan to use it to hold a spare chainsaw bar to enable me to sharpen chains removed from my chainsaw later this summer when I try out my chainsaw sawmill. I will be swapping chains in the field and so the chains will not all be on the chainsaw to sharpen. The rubber jaws of the UP-360 will grip without marking the bar.

Zesummenhang Produiten

hot
Yost Vises COV-3 Clamp-On Vise
3.5/5

€ 75.92

Yost Vises COV-3 Clamp-On Vise
3.5/5

€ 75.92

hot
BESSEY BV-HD60 Heavy Duty Bench Vise, 6 Zoll.
3.6/5

€ 244.63

BESSEY BV-HD60 Heavy Duty Bench Vise, 6 Zoll.
3.6/5

€ 244.63

hot
Yost Vises ADI-8 Heavy Duty Vise
3.5/5

€ 818.51

Yost Vises ADI-8 Heavy Duty Vise
3.5/5

€ 818.51

hot
AFF General Duty Swivel Bench Vise, 6 Maximal Ouverture, 3-1/2 Halsdéift, 3942 General Duty Swivel Vise 6
2.3/5

€ 570.96

AFF General Duty Swivel Bench Vise, 6 Maximal Ouverture, 3-1/2 Halsdéift, 3942 General Duty Swivel Vise 6
2.3/5

€ 570.96

hot
IRWIN Woodworking Vise, 3-Zoll (226303ZR) Spann-On Vise
3.5/5

€ 71.41

IRWIN Woodworking Vise, 3-Zoll (226303ZR) Spann-On Vise
3.5/5

€ 71.41

hot
JET 70402 Parallel Clamp Bench Dog (4-Pack)
2.1/5

€ 69.16

JET 70402 Parallel Clamp Bench Dog (4-Pack)
2.1/5

€ 69.16

hot
Big Horn 19112 3/4-Zoll kleng Bänk Hënn Set, 2-Pak
3.4/5

€ 36.07

Big Horn 19112 3/4-Zoll kleng Bänk Hënn Set, 2-Pak
3.4/5

€ 36.07

hot
Wilton 150, Clamp-On Bench Vise, 3 Jaw Breet, 2-1/2 Maximal Jaw Ouverture (33150) Bank Vise-Clamp On Base
0.1/5

€ 92.08

Wilton 150, Clamp-On Bench Vise, 3 Jaw Breet, 2-1/2 Maximal Jaw Ouverture (33150) Bank Vise-Clamp On Base
0.1/5

€ 92.08

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen

Kategorien

All d'Kategorien
Menu Kategorien Noper Weenchen

Menu