Attwood 1733-4 Turbo 3000 Series Souffleur de cale en ligne, pour tuyau d'aération de diamètre intérieur de 3 pouces, résistant à l'eau, 12 volts

Name: Attwood 1733-4 Turbo 3000 Series Souffleur de cale en ligne, pour tuyau d'aération de diamètre intérieur de 3 pouces, résistant à l'eau, 12 volts
Brand: attwood
SKU: 012302710907
Price: 58.90 EUR
Availability: InStock

Brand:attwood

3.7/5

€
58.90

Ne pas faire fonctionner dans une zone de chaleur élevée supérieure à 160 °F (71 °C). Protection contre l'allumage marin et pieds de montage intégrés pour une installation verticale ou horizontale facile. Jusqu'à quatre fois plus efficace que les ventilateurs concurrents, car il consomme jusqu'à 40 % d'ampères en moins. Le débit d'air du système dépasse les ventilateurs en ligne de style plus ancien jusqu'à 25 %. Le balayage et l'inclinaison des pales sont conçus pour un coefficient de portance élevé, ce qui entraîne une augmentation de la vitesse du flux d'air pour une ventilation optimisée. Dispose d'une conception en ligne brevetée et le ventilateur à 5 pales maximise le flux d'air et l'efficacité. Fournit un flux d'air de ventilation exceptionnel pour des zones telles que les compartiments moteur, les cuisines, les cales et les têtes.

Montant

Ajouter au panier Acheter maintenant

EAN: 012302710907

Catégories Sports et plein air, Sports et Fitness, Navigation et voile, Bateaux et équipement, Pièces de moteur de bateau, Soufflantes,

Brand	attwood
Color	Unspecified
Item Weight	13.6 Ounces
Material	other
Voltage	12 Volts

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: JE

Blower

Works as it should

Scritto da: Jason

Plastic where hose mounts is thin.

This is my second one. First one cracked where you connect the hose. Can't take any type of real pressure. So don't tighten down a hose clamp to much. Didn't crack right away but did crack eventually. Thank goodness only the crack happened and didn't get water down in it. But the blower works like it should

Scritto da: Luke Y.

Works great.

I purchased this to help cool the clutching on my side by side. This little fan does a great job.

Scritto da: Bobby

Works perfect

I put this fan in my engine compartment of my max 6 wheeler to remove some of the heat and it works perfectly

Scritto da: T. Sutton

hydro cooling fan

For whatever reason ,, on the John Deere 140 I bought at an auction someone cut the shaft off of the back of the hydro where the fan is supposed to mount . I used this fan to cool the hydro . We will see how it works out long term !

Scritto da: robert

Great fan

Works like it should

Scritto da: rick ibarra

blower

worked great, makes some noise but does the job for what i need it for

Scritto da: Gary

Original lasted a bit over 3 years before failing from moisture

I use this in a 16 tap keezer to move the cold air around keeping the kegs and tap lines equally cold. The fan assembly is pointed down as I need to draw cold air from the bottom of the keezer up, assisting with natural convection currents from the temperature differences. This has a brush motor that is insulated, but like wearable items the brushes are usually the first to go. The fan is operated by a DC motor controller that keeps the fan speed very slow compared to its full power. The fan is overly powerful for my application. Its environment is similar to what it was intended to be used for. The high moisture though eventually took its toll. Still a very well built product that would buy again.

Scritto da: Sean

Great product

I used this to replace the blower on my 20yr old inboard boat. Super easy to install and the drill holes on the blower were the same spacing as the original. I purchased some waterproof/solderless/heat shrink connectors from Amazon to connect the wires (I just cut the wires and spliced them). It took me 5 minutes to replace, and it’s nice and quiet with lots of power. I would highly recommend this product.

Scritto da: M. C. Alessandrini

No complaints, does the job and seems as good as any.

Well Attwood products have been on boats as oem for easily 40 or so years, so it would go without saying this one is as good as any. Certainly they are not spectacular in any way but they do the job. The original one on the boat (also Attwood) lasted 16 years, hopefully this one will too (somehow I doubt it). Seems to do the job well enough. There are some complaints about noise, I am not at liberty to have an opinion due to lack of experience, but I can say it's a little quieter than the original on our boat. What I can say though, is that my Brother and I discussed the comments on noise and we personally prefer them loud so we can hear when we left it on!

Scritto da: PBL

right part- right price!

quiet and easy install

Scritto da: Amazon Customer

Good product

Great product for the money Fairly quiet small and moves a lot of air

Scritto da: S Mulligan

Does a good job and arrived quickly

Powerful and quieter than original. Easy to mount. Would prefer if it could have some plug and play options to power it however easy enough to splice and move on.