BestEquip Échangeur de chaleur 3x7,5 60 plaques Échangeur de chaleur à plaques brasées 316L 1/2 BSP FPT Échangeur de chaleur EATB12 Refroidisseur de moût de bière pour chauffage hydronique

Name: BestEquip Échangeur de chaleur 3x7,5 60 plaques Échangeur de chaleur à plaques brasées 316L 1/2 BSP FPT Échangeur de chaleur EATB12 Refroidisseur de moût de bière pour chauffage hydronique
Brand: BestEquip
SKU: 0700721078752
Price: 138.37 EUR
Availability: InStock

Brand:BestEquip

3.4/5

€
138.37

Très polyvalent : cet échangeur de chaleur offre le plus haut niveau d'efficacité thermique et de durabilité dans une unité compacte et légère, idéale pour le refroidissement industriel de l'huile, les évaporateurs réfrigérants et les condenseurs, les systèmes hydroniques CVC résidentiels et commerciaux légers. Conception compacte : la conception de la plaque ondulée de ce moût de refroidisseur à plaques permet une construction et un encombrement sensiblement plus petits à des performances équivalentes ou supérieures à celles d'autres dispositifs de transfert de chaleur, ce qui entraîne des économies d'espace importantes. Construction robuste : cet échangeur de chaleur à 60 plaques comprend des tôles en acier inoxydable 316L, qui sont brasées ensemble sur les bords et la matrice des points de contact pour une pièce fiable et robuste pour former une pièce intégrale durable qui peut résister à des pressions et températures élevées. Quatre ports BSP FPT épaissis pour une installation plus facile. Énergie optimisée : cet échangeur de chaleur en acier inoxydable peut chauffer l'eau à la température prédéfinie, ce qui est super économe en énergie sans consommation d'électricité et sans consommation d'oxygène. Efficacité thermique élevée : la conception à flux turbulent déplace les deux médias dans des directions opposées et crée de fortes turbulences pour des taux de transfert de chaleur et une efficacité supérieurs. Notre série d'échangeurs de chaleur a été certifiée par CE.

Aucune unité disponible

EAN: 0700721078752

Catégories Maison et cuisine, Industriel et scientifique, Mystère, Thriller & Suspense, Brasserie domestique et vinification, Bière, Wort Chillers,

Batteries Required?	‎No
Color	‎White
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 128 ratings 4.4 out of 5 stars
Included Components	‎1
Is Discontinued By Manufacturer	‎No
Item model number	‎Best Equip heater
Item Package Quantity	‎1
Item Weight	‎5 pounds
Manufacturer	‎VEVOR
Material	‎metal
Number Of Pieces	‎1
Part Number	‎BSP FPT Heat Exchanger
Product Dimensions	‎12.2 x 6.7 x 4.7 inches
Size	‎60

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: tammy kowitz

Help

I really need to return this and the return window closed yesterday! I can’t find the right size fitting threads

Scritto da: Michael Voigt

Cools wort, doesn’t leak, seems legit.

I use this as a wort chiller. When I switched from an 8 gallon kettle to a keggle, my copper coil was physically too small to use and still have the connections outside of the kettle. After I had a hose blow off my coil and get tap water in my nearly chilled wort, I decided to find a better way. The nice thing about a plate chiller is that it is so small that you don’t need to handle or store it. I have mine clipped right next to my kettle, and all I have to do when I want to use it is hook up my hoses. I’m going to exbeeriment with using it during my eBIAB mash to heat sparge water to mash temps. As far as cleaning goes, I’ve found that it really helps to alternate back and forward flushing hot PBW through it until it runs clear, then repeat with water. Time will tell how clean it stays. As far as performance, it gets my 5 gallon batch of wort from boiling, down to pitching temps in about 30 minutes on tap water. I was hoping for faster cooling than that, but I’m going to tweak my technique a little and see if I can avoid recirculating it back into my kettle. If I set it up right, it should come out at pitching temperature. That should shave some time off my brew day.

Scritto da: Michael Miller

Works better than expected, fastidious cleaning after use highly suggested

I use this product to cool the wart of my beer. I have to admit it exceeded expectations! With my ground temperature water, it was able to cool down 6 gallons of 210 degree wort to 65° in under 5 minutes. I couldn't believe it! This thing got it done so fast it was ridiculous. Highly recommend it. Be aware of that you have to be very fastidious in your cleaning after cooling your wort.

Scritto da: Cory A Kratzer

Works great

Chills wort within 30 minutes

Scritto da: bbnj

Good value

Used to add radiant floor heat using my on demand water heater. Worked perfectly.

Scritto da: Daniel M Murillo

Decent job transferring heat

This plate chiller is used for my 10 gallon brewing system. I have a couple of pumps I use to run water and wort through the chiller. It gets 10+ gallons of boiling wort to under 100 degrees in about 15 or 20 mins, then takes another 10 or 15 to get under 80, mostly due to hot TX water and not having enough ice on hand. But overall the chiller does a decent job of transferring the heat. I just wish the water ports were fitted for garden hose. Not a big deal, I just hooked up some quick disconnects and bought an adapter for my garden hose. Also, I’d like the brackets to be a little longer as they seem to bend slightly trying to cinch them down- again though nbd.

Scritto da: Steve Raabe

Fittings are very close together so you cannot use 90 degree fitting on all 4

100% heat transfer fitting are to close in order to use 90degree fittings on all 4

Scritto da: Rickey M. Horwitz

Excellent Value and Very Good performance

I purchased this to replace my 30 plate chiller and it works almost twice as good without spending twice the money. As other people pointed out, it has four 1/2 FPT fittings, so you will need to buy a FPT to hose bib m/f for the cold water side.

Scritto da: Gary williams

Used for swimming pool

Used this to heat my 12 foot swimming pool, can get the pool to 40c from the central heating if I want! Left it turned on with no control, that’s how I know. Controls and stats now fitted, sits perfect at 30c now great item

Scritto da: Cliente Amazon

Soddisfatta

E stato il miglior acquisto dell’anno . Visto il caro bollette abbiamo pensato di aggiungere alla nostra caldaia questo scambiatore .. e va benissimo ! Poi il prezzo non ne parliamo .. OTTIMO ???? C’è lo siamo però fatti istallare da un idraulico per essere più tranquilli !

Scritto da: Marco

Riscaldamento acqua sanitaria

Prova per riscaldare acqua con stufa a pellet riuscita????????

Scritto da: Massimo fogli

Ottimo prodotto

Ottimo prodotto

Scritto da: andrea

Pessimi

Non comprerò mai piu