BLACK+DECKER Ventilateur de plafond en nickel brossé télécommandé à 4 pales de 52 pouces Argent Argenté 52 4 pales réversibles

Name: BLACK+DECKER Ventilateur de plafond en nickel brossé télécommandé à 4 pales de 52 pouces Argent Argenté 52 4 pales réversibles
Brand: BLACK+DECKER
SKU: 0819813015527
Price: 243.12 EUR
Availability: InStock

Brand:BLACK+DECKER

3.2/5

€
243.12

Ventilateur de plafond BLACK+DECKER 52 pouces avec kit d'éclairage et télécommande - Ventilation élégante et efficace pour votre maison ou votre bureau ! Sur le point de s'endormir mais ensuite vous avez réalisé que vous deviez vous lever et éteindre votre ventilateur ou vos lumières. Tracas, non? Avec notre ventilateur de plafond télécommandé, il vous est désormais possible de les éteindre dès que vous êtes sur le point d'aller au pays des rêves en n'ayant qu'à bouger votre main et votre doigt ! Le ventilateur de plafond BLACK+DECKER de 52 pouces est doté d'un corps en nickel brossé avec 4 pales en contreplaqué au fini argenté. Le débit d'air à trois vitesses offre des options de refroidissement efficaces en fonction de vos besoins. Il est également livré avec un kit d'éclairage en verre blanc givré, vous permettant d'utiliser notre ventilateur de plafond comme luminaire. Une télécommande portative est également incluse afin que vous puissiez régler la vitesse de ventilation ou éteindre les lumières avec très peu d'effort. Pratique, économique et peu encombrant, le ventilateur de plafond BLACK+DECKER est tout ce dont vous avez besoin dans votre espace de vie ou votre bureau pour garder votre pièce bien ventilée et bien éclairée ! Spécifications : Taille : 52' de diamètre Ampoules (vendues séparément) : 2 x 13 W (type de base E26) Débit d'air (CFM) : Haut 4700 / Moyen 3290 / Bas 1880Faites le choix pratique ! Cliquez sur le bouton Ajouter au panier et obtenez le vôtre dès aujourd'hui.

Montant

Ajouter au panier Acheter maintenant

EAN: 0819813015527

Catégories Outils et amélioration de la maison, Adaptateurs, Ventilateurs de plafond et accessoires, Ventilateurs de plafond,

PLEINE SATISFACTION - Alliant fonctionnalité et style, ce ventilateur de plafond de 52 pouces est tout ce dont vous avez besoin pour fournir une ventilation et un éclairage suffisants dans votre espace de vie! Nous offrons une garantie limitée d'un an, donc si vous rencontrez des problèmes de qualité, faites-le nous savoir et nous ferons tout notre possible pour vous satisfaire avec votre achat !. FONCTIONNEMENT PRATIQUE - La télécommande manuelle compacte et facile à utiliser vous permet de régler la vitesse du flux d'air et d'éteindre / éteindre la lumière où que vous soyez assis ou allongé. Pas besoin de se lever pour tirer sur une chaîne ou d'atteindre un interrupteur !. KIT D'ÉCLAIRAGE EN VERRE GIVRÉ BLANC - Offre une couverture élégante et sophistiquée pour l'éclairage (ampoules non incluses) et illumine sans blesser vos yeux. Permet un accent d'éclairage simple mais invitant à n'importe quelle pièce. DÉBIT D'AIR À 3 VITESSES - 3 pales réversibles en contreplaqué au fini acajou maintiennent votre espace bien ventilé, vous permettant de choisir entre une vitesse faible, moyenne ou élevée. Fournit un refroidissement efficace jusqu'à 4800 CFM. Parfait pour la chambre ou le salon, permettant à l'air frais de remplir et de se déplacer dans votre espace. CONCEPTION POLYVALENTE - Le ventilateur de plafond de 52 pouces en nickel brossé apporte une touche contemporaine à n'importe quelle pièce. Fonctionne bien dans un cadre intérieur, à la maison ou au bureau. La finition argentée élégante des pales du ventilateur de plafond complète parfaitement l'intérieur de n'importe quelle pièce, du style classique au minimaliste moderne, industriel ou Art Déco.

Air Flow Capacity	‎4700 Cubic Feet Per Minute
Assembled Diameter	‎52 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	BLACK+DECKER
Brand	‎BLACK+DECKER
Color	Silver
Color	‎Silver
Control Method	‎Remote
Controller Type	‎Remote Control
Country of Origin	‎China
Customer Reviews	4.1 4.1 out of 5 stars 241 ratings 4.1 out of 5 stars
Cutting Diameter	‎52 Inches
Electric fan design	Ceiling Fan
Electric fan design	‎Ceiling Fan
Finish	‎Brushed
Finish Type	‎Brushed
Included Components	‎Fan, Remote Control
Indoor/Outdoor Usage	‎Indoor
Is Discontinued By Manufacturer	‎No
Item model number	‎BCF5252R
Item Package Quantity	‎1
Item Weight	‎17 Pounds
Manufacturer	‎W Appliance Company
Material	‎Wood, Metal
Model Name	‎Ceiling Fan
Mounting Type	Ceiling Mount
Mounting Type	‎Ceiling Mount
Number of Blades	‎4
Number Of Pieces	‎1
Number of Speeds	‎3
Part Number	‎BCF5252R
Power Source	Corded Electric
Power Source	‎Corded Electric
Product Dimensions	52"D x 52"W x 19"H
Product Dimensions	‎52 x 52 x 19 inches
Product Dimensions	‎52"D x 52"W x 19"H
Recommended Uses For Product	Cooling
Recommended Uses For Product	‎Cooling
Room Type	Office, Bedroom, Living Room
Room Type	‎Office, Bedroom, Living Room
Size	‎52"
Special Feature	Manual
Special Feature	‎Manual
Special Features	‎Manual
Style	4 Reversible Blades
Style	‎4 Reversible Blades
Warranty Description	‎1 year limited manufacturer.
Wattage	‎13 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Richard Schweitzer

Something Else

This is a beutifl fan. It's very quiet , and pushes a bunch of air through the normally warm room. The lighting (2x 60W bulbs) lights up the room nicely, and can dim to your desired effect. After reading the other reviews I decided I could handle the installaion, it wasn't my 1st rodeo with fan installation. A couple of things that I ran into, might help others install this fan easier. 1. The heavier guage wiring in my house made it rather difficult to connect, the wiring & wire nuts, to the remote around the mounting bracket, and still be able to slide the remote reciever into position. .... and close the canopy too. I finally figured out that you have to bring the wiring above the forward bar on top of the mounting bracket, while leaving enough slack to slip in the reciever. 2. The blades are what others had described. With the recommended magnetic philips head tip om my screw driver, it was relatively easy to line up the screw & holes. 3. After putting in the blades, I turned it on and got a pulsing vibrating buzzing sound. I found, through a Google search some suggestions. In this case it was the old light dimmer I had for my old light fixture. Having replaced that with a standard light switch, the noise went away. 4. There's a smell comming from the fan. Aagin, I looked it up on Google. There are some installers who said that there's a motor coating that has to burn off after 24-48 hours of use.... one said it took a week. I'm writing this right after installation so I would remember what I had to pass on, so I can not verify the smell part just yet, though I am hoppefull. Hope this helps your installation

Scritto da: Felix

Quality Control Issue

Clearly there’s a need for better quality control. Firstly, although instructions can be improved, it shouldn’t be difficult to install this fan by a handy person. Secondly, though there were a few scratches on the fan blades and minor imperfections, they can be hidden by reversing the blades, so the imperfections are facing towards the ceiling. However, the biggest issue and the reason for my one-star review is because the mounting bracket is too deep and hits the canopy mounting screws when doing a flush mount. I checked a few previous reviews here at Amazon and there appears to be lots of complaint about this same issue. For most, this issue is detected when getting ready to install the fan and after installing the fan’s supporting bracket on the ceiling. The fan itself is in the heavy side, so lifting it and trying to get it in place can be a hassle if the canopy holding screws won’t line up. If you purchase this fan and are doing a ‘flush mount’ you should, in my opinion, skip step 4 of the manual for now (installing bracket to ceiling outlet box), then go to step 6, which is Flush Mount Installation Option, and install the canopy to the motor housing. Note that you’re supposed to use a rubber “bushing” between the canopy and the motor housing but mine didn’t come with one, so I had to make my own. After installing canopy to the motor housing, dry install the fan supporting mounting bracket onto the canopy and make sure the side screw holes in mounting bracket align with the canopy’s side screw holes...these are the holes for the screws that support the fan to the ceiling. If holes don’t align it probably means, at least in my case, that the supporting mounting bracket hits the screws that support the canopy to the motor housing. In my opinion, if that’s the case, you have these options: contact Amazon or seller for support, try grinding down the supporting bracket or the head of the screws, use screws with thinner head or start a return.

Scritto da: Amazon Customer

Happy with the customer service from Black and Decker

I purchased two of these at the same time and the first one installed without issue. When I opened the second the globe for the light was shattered. Amazon told be I would have to return both fans to get a replacement which was quite inconvenient seeing as the other was already installed. I called Black and Decker directly and although it took a couple months and 3 separate phone calls they did eventually send a replacement. Once I had the glove I installed the fan only up find the remote and remote box didn't work. I contacted Black and Decker directly again and this time I did have to call twice but the replacement parts arrived quickly. I haven't installed the new parts yet but I gave this item 4 starts because even though I took a bit of effort on my part Black and Decker worked with me and made sure I received all the parts I needed. The fans do look great once installed.

Scritto da: Julio R.

Great price and loom

I see so many negative reviews on this productw but loved the price and look so i bought it Installation so easy didnt even read the book i see people saying they have installed many and this was the harded for them .. Well for me out of the box witout reading instructions maybe 20 mins up and running People say no room for control module but it slips right in bewteen cieling and hanging bracket.. People say the blades are flat ... but the blade are actually at angle once installed plenty of air flow. People say u cant get standards bulbs in socket i put two right in no issues ...so unless they upgraded the products after all the feedback its Great looking fan all the features low price easy up...

Scritto da: Lou Platform

Great Price, Quality Look, Remote, function-ability and ease of install. ????????????

Great Price, Quality Look, Remote, function-ability and ease of install. ???????????? Will definitely recommend. Best price by far!!! Comparable to other models priced for triple its price. Modern, contemporary up to date design and clean line look. Allows for proper air displacement and control. Have seen discrediting reviews but most likely created by transport or installations. Ours do not wobble and works perfectly. Will definitely buy again. We bought for $79.00. Noticed price went up to $100.00 (that was not good) but it’s now back to around $85.00 again. Maintain at that price and it will be a great buy as stated above. Hope this helps.

Scritto da: J-P

Great fan.

Great fan, low noise and move lot of air.

Scritto da: Paullando Richards

High speed is very slow

Only problem is that the high speed is very very very slow that do not do any thing, I bought for my holiday home and now I only use for the light.

Scritto da: Ed P

Looks great but ...

It looks good installed, runs super quiet, but awkward to install and some little annoying to things. I wanted to replace the wireless controller in the fan with an aftermarket universal Smart controller. The one included is a proprietary design, so no chance to upgrade it as the universal one won't fit. Attaching the fan blades once the fixture is installed is a pain, as you have to pass a screw on the tip of your driver, up through a slot in the light fixture, through the blade screw hole into the fan housing. When doing this on a ladder with the free spinning fan housing, it doesn't take long to become frustrated with the design. Finally, every other remote-controlled fan we have has the slowest speed at 1 and gets progressively faster as the numbers get larger. Makes sense. This fan has the fastest at 1 and the slowest at 3. Haven't figured out if there is some way it makes sense, but at least they got the 2 speed right, as it is the middle speed.

Scritto da: Shirley Kunzler

bad construction

I had to hire a contractor to install this unit the parts did not fit together and he had to modify the base unit so it could be hung as ceiling mount--took over 4 hours to get it hung then the fan blades had to be adjusted because they where scraping somewhere--very bad investment- never buy another one

Scritto da: Jen Foxcroft

Safety issue : no safety chain

do not buy this fan. The mounting bracket is super thin aluminum and it has no safety chain to secure the fan to the ceiling. This is one huge safety issue. My electrician struggled for 4 hours to install this fan and gave up and we returned the fan for a refund.