Casque de soudage ArcOne X54V-1523 Vision de qualité industrielle avec filtre numérique auto-assombrissant X54V, Speedway

Brand:ARCONE

3.7/5

392.73

Si vous ressentez le besoin de vitesse, faites-vous remarquer dans ce casque de vision Speedway DECAL avec l'ASIC amélioré, nuance variable numérique 9-13 ADF avec une zone de visualisation de 7,25 pouces carrés ; centre de commande interne pour 8 niveaux d'ombre et de sensibilité, mode de broyage positif, convient aux casques de vision. Pour le soudeur plus sophistiqué recherchant la précision et la capacité d'aller à des amplis extrêmement bas. ArcOne est un fabricant de produits de sécurité industrielle, notamment des casques de soudage à assombrissement automatique, des lunettes de sécurité, des casques de sécurité, des sources d'alimentation à onduleur et des produits de protection respiratoire. La plupart de nos produits sont conçus et fabriqués dans notre usine de Taunton, MA. ArcOne est bien connu pour être innovant à la fois dans la technologie et dans la commercialisation de tous ses produits et a été une force majeure dans l'évolution de l'activité des casques de soudage à assombrissement automatique depuis 1992.

La coque Vision est légère et ergonomique avec une couverture complète de la tête, du cou et des oreilles. ADF numérique à teinte variable de 9 à 13 avec commandes externes pour la teinte et la sensibilité. 10 réglages de sensibilité pour une configuration parfaite à chaque fois. 10 réglages de délai de 0,1 à 3,5 secondes offrent la plus grande plage de l'industrie. Les performances numériques et un CIRCUIT intégré spécifique à l'application garantissent une qualité maximale et des performances parfaites à chaque fois.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Speedway
Country of Origin ‎Taiwan
Customer Reviews 4.6 4.6 out of 5 stars 2 ratings 4.6 out of 5 stars
Included Components ‎X54V-1523 Speedway Vision Helmet with X54V Digital Filter
Item model number ‎X54V-1523AON
Item Package Quantity ‎1
Item Weight ‎1.95 pounds
Manufacturer ‎ArcOne
Measurement System ‎Metric
Part Number ‎X54V-1523
Product Dimensions ‎11 x 10 x 11 inches
Style ‎Speedway

3.7

1 Review
5 Star
64
4 Star
36
3 Star
0
2 Star
0
1 Star
0

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Dale E.
A decent helmet for the money.
The Vision series helmet with the X54V Auto Dimming lens comes with a 2 sensor 7.25 sq inch view screen which responds quickly to input. You are able to adjust the shade from 9 to 13 in even increments. Sensitivity is adjustable over a wide range with the lowest setting being grind mode. Delay coming off auto dark is adjustable from .5 seconds to 3.5 seconds in half second increments. I suspect not to many people will be using the longer delay settings. The model I purchased, X54V-1555 Tank, has a nice matt finish to it that feels slightly waxy to the touch. I suspect the coating is a to protect the finish from arc splatter. The helmet is very light and relatively sturdy for the weight. Fairly narrow as well. Contrary to the 2017 and 2018 ArcOne brochure this came with the ComfaGear head gear not the ComfaGear II. The included sweat bands (two, one front and one rear) are closed with velcro. Its not bad by any means but like anything velcro, fibrous material and hair caught in the closure will lessen it's ability to hold. My gut feeling is it will do the job intended. The helmet gear is fully adjustable both up and down and fore and aft to suit most users. I can't say whether or not it is good enough to wear all day without discomfort as I only had it on my head about a half hour. Between the lightness of the helmet and the included gear, it should work for all but the most demanding usage. As a hobbiest it will be more than enough for my modest needs. I can't say how this may compare to the likes of an ESAB or Viking for daily wear as all I've ever used over the years is a fibermetal pipliner style with a fixed lens, your basic Central Electric A/D and my current Jackson Safety with a fixed shade glass lens. The clarity of the weld puddle is at least on par with the gold coated fixed shade Jackson with an older but still good cover plate. The model included both an inner and outer Z87 cover plates and a spare front. Both inner and outer are polycarbonate/ lexan - the outer being curved upon install. It has a push button on the inside to aid removal of the outer. Conclusion... The shell is nice and lightweight. The headgear is comfortable and is highly adjustable. The AD filter is fast to respond and has a fair amount of settings. Grind mode requires the helmets removal. Personally I wouldn't grind with any hood but that's just my preference. Is it a top end Helmet? No, but it doesn't carry the price tag either. Cons? I haven't used it long enough to tell.

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array