Collier d'arbre Climax Metal C-100, acier zingué, style vis de réglage, une pièce, 1 alésage, 1-1/2 OD, 5/8 de large, avec vis de réglage 5/16-18

Name: Collier d'arbre Climax Metal C-100, acier zingué, style vis de réglage, une pièce, 1 alésage, 1-1/2 OD, 5/8 de large, avec vis de réglage 5/16-18
Brand: Climax Metals
SKU: 0769897689223
Price: 20.00 EUR
Availability: InStock

Brand:Climax Metals

3.6/5

€
20.00

Faites simplement glisser ces colliers sur un arbre et serrez la vis de réglage pour maintenir le collier en place. Les colliers sont faciles à régler grâce à leurs vis de réglage. Fabriqué en acier au carbone avec une finition oxyde noir pour offrir une légère résistance à la corrosion. Nos colliers d'arbre sont disponibles dans plusieurs styles différents pour répondre à vos besoins ou à ceux de vos clients. Climax Metal Products Co. en affaires depuis plus de 60 ans est le principal fabricant de colliers d'arbre, d'accouplements rigides et d'ensembles de verrouillage sans clé. Climax Metals, où des prix équitables et un excellent service client sont notre promesse.

Montant

Ajouter au panier Acheter maintenant

EAN: 0769897689223

Catégories Industriel et scientifique, Produits de transmission de puissance, Coupleurs, colliers et joints universels, Colliers d'arbre, Set-Screw,

Indicateur d'état de la batterie à LED : les voyants LED colorés indiquent le niveau de la batterie et de la charge, la vitesse du moteur, etc. Moins de 2,3 kg : cet aspirateur balai 2 en 1 a un design super léger et est parfait pour le nettoyage au-dessus du sol ou pour monter et descendre les escaliers. Contrôle à 2 vitesses : 8000 PA d'aspiration puissante nettoie en profondeur votre maison sans les tracas d'un cordon sur toutes les surfaces, y compris les sols durs, les tapis ou les tissus d'ameublement. 50 % de capacité en plus du godet à poussière* : le godet à poussière extra-large et facile à vider de 1 litre vous permet de couvrir une plus grande surface de nettoyage avec moins d'interruptions. La filtration HEPA capture 99,97 % de la saleté et des débris jusqu'à 0,3 micron. Autonomie de 40 minutes : la batterie 21,6 V avec commande à 2 vitesses offre une autonomie prolongée de 40 minutes et se range facilement sur un support mural afin qu'elle soit toujours chargée et prête à être nettoyée.

Country of Origin	USA
Item model number	C-100
Manufacturer	Climax Metal Products
Product Dimensions	1.6 x 1.6 x 0.7 inches; 2.4 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Grant R

Caution: Will not fit ALL so-called “1-inch bars.”

I can’t fault the seller that these collars didn’t fit on all my 1-inch bars. The specs are posted. However, it seems not all 1-inch bars are exactly 1-inch in diameter after all. I used these Climax collars on an old EZ-curl bar with threads/collars worn so badly they no longer tighten down completely. Also, one of the plate stops had come loose over the years. I used one on each side to make the weight-plate placement equal, and another one on each side to keep the screw-collars from backing out — four in all, and saved me the cost of buying an expensive new EZ-curl bar. Although fitting easily on that bar and another older threaded type bar, they were too tight on my newer, threaded dumbbell bars and on my older slide-collar type bars. The original collars for the latter measured about 1.050”. Obviously, these Climax collars weren’t designed for this particular 1-inch application in the first place. They also didn’t fit over the 1-inch round rolled-steel bar stock I’d used on my old homemade cable lat low-row machine built 28 years ago. I measured these bars with precision dial calipers (0.001” accurate) and discovered that they are not perfectly round, hence not precisely 1-inch in diameter. Varying by plus or minus 20 thou, depending on the point of measurement. This also proved to be the case with the older slip-on collar type barbell and dumbbell bars. I decided to try drilling them [collars] out to 1/32” over with an electric drill, my drill press being broken, but the attempt failed. Bad idea! A better one was to use a high-speed rotary grinder and grinding stone. This took a few minutes for each collar but worked well enough and didn’t really cost me anything except a little time. Despite that minor hassle, these are excellent quality collars. I’m now using them on several threaded bars to prevent the damned screw-collars from coming loose all the time. Although they’re not going to work on every so-called 1-inch bar, for me they turned out to be a decent deal considering there’s not much more than high-priced options of dubious quality [plastic] out there these days. They require a 5/32”, or 4mm Allen key for the set screw.

Scritto da: C C C

I like it

This collars looks good and and shine, the way how I spect.

Scritto da: Handyman Stephen in Fort Lauderdale Florida

Fast delivery. Excited as described on Amazon site

I purchased one 1 inch ID (inside diameter) as a reference sample for future Purchases. It's lite weight. Brushed aluminum clean finish. set screw is iodized black finish. Smooth operation. Included are two Allen wrench/Allen key. I recommend this product.

Scritto da: Jorge

Found a greater purpose for it

Annoyed by the nut coming loose every time I put them down I resorted to this collar and voila, the plates have not moved in 3 sessions.

Scritto da: John H Knox Jr.

Good fit

Good fit

Scritto da: Raymond Harper

Fitted perfectly with strength to match.

Fitted perfectly with strength to match.

Scritto da: Sammy Farha

1 inch steel collars

1 inch steel collars with hex/ allen wrench screw. Fantastic collars. I originally bought four for two of my weight dumbbells. I just bought eight more for some of my other 1 inch weight dumbbells. Great quality. Tightened the screw with an allen wrench I had and it feels very tight. Perfect fit. Don't make the same mistake I did and buy those cheap plastic 1 inch collars. Instead by the solid steel 1 inch collars. The picture has an example of the cheap plastic ones that you don't want to buy. In the picture I also left the twist collar on too only because I had room but I would feel very comfortable just to put this collar on if I ran out of room on the bar.

Scritto da: Joel M

Too small for cheap 1 inch tube stock

These probably work great for 1 inch precision machined shafts, but they are too small for "1 inch" round tube stock from Home Depot or Lowes.