CURT 55513 Faisceau de câblage de remorque 4 broches côté véhicule, Select Toyota Tacoma, T100, Hilux, Noir

Brand:CURT

3.8/5

85.27

Si votre véhicule n'est pas équipé de câblage pour tracter une remorque, le câblage sur mesure CURT est la solution idéale. Un faisceau de câbles personnalisé - également appelé connecteur en T - est un appareil électrique simple et prêt à l'emploi qui se branche sur votre système électrique automobile et fournit une connexion de câblage de remorque standard et universelle. Cela se fait à l'aide de deux ou plusieurs connecteurs compatibles OEM spécifiques au véhicule à brancher sur l'ensemble de feu arrière, éliminant ainsi le besoin de couper, d'épisser et de souder pendant l'installation. Les faisceaux de câbles personnalisés sont spécifiques au véhicule et, bien qu'ils ne soient pas disponibles pour tous les véhicules, ils offrent l'un des moyens les plus rapides, les plus simples et les plus sûrs de câbler un véhicule pour le remorquage. Ce faisceau enfichable particulier fournit une prise de connecteur plat à 4 voies et est conçu pour être un faisceau de câblage personnalisé pour s'adapter à certaines années du Toyota Tacoma, T100 et Hilux (pour vérifier la compatibilité de votre véhicule, voir les informations d'application). Il est livré avec tous les composants de câblage nécessaires pour établir une connexion de câblage de remorque fiable, ainsi qu'un cache anti-poussière pour garder le connecteur propre lorsqu'il n'est pas utilisé. Vous avez une image en tête de votre prochaine destination - peut-être est-ce le débarquement du bateau sur votre lieu de pêche préféré, peut-être est-ce un camping qui surplombe l'un des chefs-d'œuvre de la nature, ou peut-être est-ce le prochain grand chantier. Cependant, transformer cette image en réalité demande plus qu'une simple rêverie. Il faut une connexion solide et la bonne quantité de puissance. Le câblage personnalisé CURT est fabriqué avec certaines des technologies les plus sophistiquées de l'industrie et est conçu pour être installé facilement, vous offrant une connexion électrique durable pour votre configuration d'attelage de remorquage.

Aucune unité disponible
HOUSSE DE PROTECTION. Pour favoriser une utilisation durable et une résistance aux intempéries, ce faisceau de câbles d'éclairage de remorque à 4 pôles est livré avec un cache anti-poussière en caoutchouc. Il s'adapte facilement sur le connecteur plat 4 voies lorsqu'il n'est pas utilisé, le protégeant ainsi des éléments extérieurs. PUISSANCE FIABLE. Ce faisceau de câblage de remorque à 4 voies est construit avec la technologie de montage en surface. Ce type de circuit génère moins de chaleur, une intensité lumineuse optimale et des performances durables. SPÉCIFIQUE AU VÉHICULE. Ce faisceau de câblage de remorque de véhicule de rechange est conçu pour certaines années de Toyota Tacoma, T100 et Hilux. CONNECTEUR STANDARD. Ce câblage de remorque enfichable à 4 plats peut être utilisé pour connecter les feux arrière de la remorque, les feux de freinage et les clignotants. Le câblage d'éclairage de remorque à 4 voies est populaire sur une variété de remorques, ajoutant des options de remorquage polyvalentes pour votre véhicule. FACILE À INSTALLER. Pas de découpe ! Pas d'épissure ! Ce kit de faisceau de câbles de remorque se branche sur le câblage d'usine existant de votre véhicule et l'équipe d'un connecteur de câblage de remorque arrière standard à 4 broches pour brancher et tracter une remorque.
Brand CURT
Brand ‎CURT
Customer Reviews 4.7 4.7 out of 5 stars 1,008 ratings 4.7 out of 5 stars
Exterior ‎Machined
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 3 inches
Item model number ‎55513
Item Weight 0.91 Pounds
Item Weight ‎14.6 ounces
Manufacturer ‎CURT
Manufacturer Part Number ‎55513
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎55513
Product Dimensions ‎9 x 4 x 3 inches

3.8

13 Review
5 Star
84
4 Star
10
3 Star
4
2 Star
2
1 Star
2

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: MH
Easy install, good value
I’m not a mechanic, and this was still easy to install. Took no more than 30-45 minutes going slowly and methodically. Fits the Toyota Tacoma 2005-2015 perfectly and has worked well for me. Would recommend if you don’t want to splice wires.
Scritto da: Capt Jay
Easy Install
I would go for 5 stars, BUT the double sided patch they provided was all dried out and worthless. Ugh.. I had to jump through hoops to secure the module inside the twilight box.
Scritto da: Mustafa Al azzawi
Quality
It is really easy to install and very good for the value but the quality of the wiring not that good but overall I haven’t had an issue with it works well
Scritto da: Ian from the north
Easy install
Perfect fit 2014 Tacoma. Super easy to install and works great.
Scritto da: Jeffy T
Doesn’t get much easier than this!
Clean off some paint, drive a self tapper in for ground, zip tie the slack, plug and play from there! I HATE cutting factory wiring, this was the answer!
Scritto da: Atmosfera
OEM quality
I loved how easy to install this harness was. It is now installed into a Mexican Toyota Hilux 2017. Every connector fits without a problem. The instructions on how to replace it are great. My recommendation is for you to get a tester to keep in the truck for future usage. It only adds a couple of dollars to the setup. Great product!!
Scritto da: DownTown
Install was a breeze
Watched YouTube video on the install and it was very easy. 20 min and I was done.
Scritto da: Tranche
Perfect!
Installed on a 2014 Tacoma after waiting approx. 1 month for Curt to confirm (in their application chart) that the T-Connector for the 2013 Tacoma also fits the 2014. It does! And the quality of this harness is first rate, including the connectors which appear to be identical to the Toyota OEM. Just a few suggestions to improve the installation experience: First, there's really no need to drill a hole to attach the ring terminal ground. Inside the left tail-light housing, there are 3-4 machine screws (ends) attaching the metal housing to the truck body. You need only use one to attach the ring terminal; I used the upper right with a nut and lock washer I supplied. I tested this ground location with a meter and found that it's solid. No drilling. A second suggestion would be to add wire conduit to all three branches of the T. While not required, I believe this upgrade improves the integrity (and certainly the protection) of the wiring and conforms with the OEM wiring in the vicinity of the T-Connector. If you do install conduit, do this BEFORE you plug in and route your wiring. Much easier this way. You'll need approx. 10 ft. of 3/8" or 1/2" split seam conduit; I used Dorman #86651 @ $6 (approx.). Seal conduit ends with electrical tape. Finally, as this T-Connector supplies a flat-4 connector to the trailer, I suggest that you include the Curt 58001 bracket to attach this connector to your receiver tube. It's inexpensive and fits perfectly. 7/28/14 Edit. While I certainly maintain my 5-star rating of this T-Connector, I've found that, over time (6 mos.), one minor flaw presents. The double-sided adhesive strip that's intended to hold the converter box in place loses its adhesive holding power. No worries; the fix is easy: Just replace with similar sized "industrial strength" Velcro. (I recommend 3M Dual-Lok. Very strong and inexpensive.) Cover the entire back of the box with the Velcro and attach to a (preferably) smooth and clean vertical sheet metal surface. (I had no trouble finding this.) If I were on the Product Development Team at Curt, I'd recommend a redesign of the box to include two (2) mounting ears through which sheet metal screws could be used to attach the box -- again, to a non-structural non-frame vertical surface.
Scritto da: canuk54
Fit perfectly on a 2010 Tacoma
This replaced one installed incorrectly by a nearby Truck and Van shop. It was very easy to install, less than twenty minutes from start to finish and works great. It has been installed for 5 months through rain etc with no issues. The last one was installed with the box below the truck bed, making it open to the elements and it didn't last through a Canadian winter before shorting out the brake lights and causing me to not be able to put my truck into gear. After being towed to a garage and having the cause pinpointed to the incorrectly installed trailer wiring, which was removed, all was good. This unit was recommended to me by the repair garage.
Scritto da: R. B. Clarke
Liike original equipment
Name brand and really good instructions Took about 20 minutes and looks like an OEM product which I think it is Solid construction, and only had to drill one small hole for the ground wire , screw incldued Worked like a charm
Scritto da: Amazon Customer
Works perfect.
Super easy to install. Works perfect for my trailer
Scritto da: Chris B
Easy to install
Easy to install, put on a Tacoma that’s always pulling boats out of the water. Holds up no problem
Scritto da: Jarett Miles
easy to install
Quality product, easy to install.

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array