E-Z LOK EZ-329-8 Kit de réparation de filetage pour inserts filetés en acier au carbone métallique 1/2-13 et outils d'installation 1/2-13 (EZ-329-8)

Name: E-Z LOK EZ-329-8 Kit de réparation de filetage pour inserts filetés en acier au carbone métallique 1/2-13 et outils d'installation 1/2-13 (EZ-329-8)
Brand: E-Z LOK
SKU: 0847554010433
Price: 212.33 EUR
Availability: InStock

Brand:E-Z LOK

3.7/5

€
212.33

Kit de réparation de filetage E-Z LOK pour métal Protégez les trous taraudés contre le décapage et l'usure et réparez rapidement les filetages endommagés dans le métal mou avec le kit de réparation de filetage E-Z LOK pour métal. Ce kit pratique comprend des inserts filetés en acier au carbone pour le métal, la perceuse, le taraud et l'outil d'installation d'inserts filetés. Les inserts filetés solides en acier au carbone sont solides, faciles à installer et autobloquants. Un adhésif pré-appliqué s'active lors de l'installation et maintient l'insert en place. Les inserts sont conçus pour être utilisés avec des métaux tendres tels que l'aluminium, la fonte, le magnésium, etc. Pour une tenue optimale dans le métal.

Montant

Ajouter au panier Acheter maintenant

EAN: 0847554010433

Catégories Industriel et scientifique, Nœuds, Vis et attaches, Inserts filetés, Inserts à filetage extérieur,

Inserts de réparation de filetage fabriqués en Amérique. LE KIT COMPREND - Le kit pratique comprend des inserts filetés pour le métal, une perceuse, un taraud et un outil d'installation d'inserts filetés. À UTILISER AVEC DES APPLICATIONS - Les inserts filetés métalliques sont conçus pour être utilisés avec des métaux mous : aluminium, fonte, magnésium, etc. INSERTS EN ACIER AU CARBONE - Le kit comprend des inserts filetés en acier au carbone standard faciles à installer avec des outils standard. Réparez rapidement les filetages endommagés – Réparez rapidement les filetages endommagés ou renforcez les trous taraudés dans les métaux avec ce kit d'outils de réparation de filetage.

Brand	E-Z LOK
Color	Multicolor
Country of Origin	USA
Item Dimensions LxWxH	1 x 1 x 1 inches
Item model number	EZ-329-8
Manufacturer	E-Z LOK
Material	Steel
Product Dimensions	1 x 1 x 1 inches; 1.2 Pounds
Size	1/2-13
Size	1/2-13 (EZ-329-8)

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: John Hancock

Easy to use kit and inserts are holding well

Worked as I expected. The drill may result in a tight threading with the tap for some users but I found it worked well for me.

Scritto da: John Ramos

Works great

Made the repair easily.

Scritto da: todd smith

much better than helicoil..

had to fix threads on a portable bandsaw casting,, fixed the saw better than new..

Scritto da: Jorge A.

Not a threat starting tap

While the build quality of this product seems very good, I gave it 2 stars simply because the tap it comes with is a bottoming tap. It is not a thread starting tap. It does not say this anywhere. I wanted to use it to repair a timing belt tensioner bolt hole. I spent 4 hours trying to get the tap started in an aluminum engine block, only to give up in frustration. When the tap did grab, it would cut maybe one or two threads, but then rip them out. For someone like me who is not a machinist or engineer, the instructions need to at least let us know that we need to start with a tapered tap to get the threads started. After I gave up, I did some research on why the tap would not grab. I came to find out that the bottoming tap that the kit came with is not designed to start cutting the threads, it is designed to be used AFTER you have already cut the threads with first a tapered tap, then a plug tap. I learned this after I had already attempted over and over again to start the thread, and ripped them out in the first 5mm of the hole. So now those 5mm at the beginning of the hole have no threads for the threaded insert to bite. After I learned about the tapered tap and the plug tap, I went to the local hardware store and found the right sizes of each. I started over, this time with the tapered tap first, and it bit and cut the threads first try. I then moved on to the plug tap, then finally the tap that was included in the kit. I did manage to salvage the hole and the threaded insert went in cleanly and everything tightened down nicely. The instructions seriously need to let people like me know that the tap that is included is not designed to start cutting the threads, before they damage their project beyond being salvageable.

Scritto da: DG

Better idea then a helycoil. Threads in nicely

Drill bit seams a little big so used a smaller one before tapping and still used loctite thread locker although already on the threads. Locked in great and repair is perfect with the option of removing screws for maintenance. Threaded insert stays in solid

Scritto da: Amazon Customer

Worth the money

Way better than helicoil. Permanent fix

Scritto da: Amazon Customer

Saved a 15K dollar block

I am a Field Service Manager for a Major, Class 8 truck Co. I received a call from a technician that the threads were damaged on a centering bolt for a lifter. We had previously replaced engines for this issue, so I decided to try and repair it. The product worked great. The design is such that it countersinks the insert, which was really nice for this application.

Scritto da: Hunter

This kit is my go-to

I've worked on several early 2000's VW's now where some previous owner has over torqued or reused the transmission torque mount bolts and they snap off inside the trans. This kit has set me up to where once the snapped bolt is removed, with a steady and level hand I can safely oversize the bolt hole and put these inserts in and use the stock bolt size again worry free. They are machined to where the threads will match each other when stacking them. I've been using JB weld to lock them into place permanently. If these things come out, There's a bigger problem. I've had to do this on 3 cars now, Not a problem with them yet.

Scritto da: Stephen Koshman

Works, but had to replace tap.

The kit works as described, but the tap included wasn't able to cut in to cast iron heads. Ended up buying a separate tap with more chamfering and was able to get the job done. Inserts worked as advertised

Scritto da: Kryngle

Got the job done

This saved my English block. Broken bolt deep in the block to where I connect my timing chain cover. Followed the instructions and now the car is back together running these streets.

Scritto da: Ian Taylor

Saved the dsy

This oversize insert save the day . No need to weld the 1/2 hole back go 3/8

Scritto da: Max

Strong and durable fix

Strong connection but pricy for the purpose....

Scritto da: joseph gariepy

extraordinaire !

c'est extraordinaire ce truc! j'ai sauvé mon moteur avec ça. j'ai serré ma tête de moteur jusqu'à 45 lbs .