Eastman 35201 Bonde de baignoire à levier de déclenchement 1-1/2" et trop-plein, laiton avec garniture chromée

Brand:Eastman Outdoors

3.2/5

94.22

DESCRIPTION DU PRODUIT Simplifiez vos projets de plomberie avec le remplacement de drain de baignoire Eastman. Composé de calibre 20 solide et robuste, ce couvercle de tuyau de vidange de baignoire durable s'adapte à la plupart des drains de taille standard pour permettre une installation facile, et dispose d'une finition chromée qui se marie bien avec les décors de salle de bain modernes. DU FABRICANT Le kit de vidange de bain à deux trous Eastman est conçu pour s'adapter aux baignoires de taille standard. Il est doté d'un tube en laiton de calibre 1-1/2 de calibre 20 pour une connexion solide. Ce kit est livré avec un drain 1-1/2 et une garniture chromée pour un look élégant et moderne.

Design contemporain : le protecteur de drain de baignoire dispose d'une garniture chromée élégante et moderne qui se marie bien avec une large gamme de décors de salle de bain. CE QUI EST INCLUS : Le kit d'assemblage de drain de baignoire comprend (1) drain de 1-1/2 pouce, (1) plaque de trop-plein à deux trous, (1) bouchon à levier de déclenchement et (1) crépine en laiton. Durable : le couvercle de vidange de baignoire est composé de laiton de calibre 20 pour une fiabilité durable. Polyvalent : l'attrape-cheveux pour baignoire s'adapte facilement à la plupart des canalisations de baignoire. DRAIN DE TROP-PLEIN DE BAIGNOIRE: Le drain de débordement de baignoire est parfait pour attraper les déchets de bain et constitue un excellent ajout à vos accessoires de bain ou de douche.
Batteries Required? ‎No
Brand Eastman Outdoors
Color Trip-lever
Color ‎Trip-lever
Customer Reviews 4.1 4.1 out of 5 stars 166 ratings 4.1 out of 5 stars
Included Components ‎trip lever
Item Dimensions LxWxH 12.7 x 5.3 x 3.6 inches
Item model number ‎1-1/2 Inch
Item Package Quantity ‎1
Item Weight 1 Pounds
Item Weight ‎1 pounds
Manufacturer ‎Eastman
Material Brass
Material ‎Brass
Part Number ‎35201
Product Dimensions ‎12.7 x 5.3 x 3.6 inches
Size ‎Trip Lever Bath Waste and Overflow Drain
Style ‎Brass Bath Waste Kit

3.2

8 Review
5 Star
59
4 Star
17
3 Star
9
2 Star
6
1 Star
9

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: rj
good value
good value for money, long as you know you're prepared to lengthen it with a rubber coupler, or another copper tail pipe. then there's leaks, you need to use extra teflon tape on all joints. you can also use silicone gel. It look me at least 10 tries until I finally got every single joint leak proof all the way to the U trap. a pro plumber will likely just trash this, consider time is money, and they'll just charge you $500 or more for the job. for DIY, it's definitely well worth the money, long as you don't mind putting in more time to figure out the kinks as mentioned above.
Scritto da: Brian white
Good quality product
Solid brass good quality product. A must when doing a renovation of an old bathroom
Scritto da: Mike G
The lower horizontal pipe will probably leak at the tub side but it can be corrected.
As others have already stated, the lower horizontal brass pipe will probably leak at the joint where it connects to the shoe (tub drain mount) but it can be corrected. FYI, get the tube wet and hold your hand over one end of the tube while blowing air with your mouth into the other end ("it's still clean at this point"). You will probably notice air/bubbles from the joint. Anyway, I had already cleaned the brass and was going to just solder the sections together but while trying to remove the "press fit", I discovered that contrary to what other have indicated in reviews, this is not a press joint but is actually a tightly screwed in threaded joint. I was able to grip the two sections in my hands and unscrew them by giving it all I could while flexing them back and forth. There doesn't appear to be any joint compound or tape so it's no wonder it leaks. I wrapped Teflon tape on the threads, reassembled it tightly and the leak is now gone. It's a shame that you have to do anything to a brand new part but this does make it work in a permanent manner without resorting to JB weld, solder or returning it for something else. The brass material and other parts seem to be of good quality although the overflow tube is about 1/2" shorter that my old tube and the strainer bolt is just long enough to catch but they still have enough length to work fine. I think it's still a better solution than a cheap plastic version and it's more affordable than the other brass offerings so for those reasons I would buy it again and just know that some additional tape will be needed.
Scritto da: Lazlo Homer
Warning, shallow tub only.
Looks like a quality product in spite of it's Chinese origin. No nasty solder joints and whatnot. Problem is if your overflow is more than 12" high (as most are these days) the vertical pipe is way short. Too bad.
Scritto da: Teresa
Need to contact seller. The pipe is too short
Need an extension for the overflow/stopper pipe. Would like phone number to inquire about an extension
Scritto da: Jerry Vandervort
Item was just as advertised
Well made. Worked as it should
Scritto da: Erica
Box was broken apart when received and the shoe leaked
Sad that it leaks from a non user install area. Meaning it’s not anything an installer could control. It’s supposed to be solid and cast where it is leaking. I just need Amazon to ship a replacement shoe because I don’t want to uninstall the whole thing.
Scritto da: MAGstar
Easy!
It was much easier to install than I thought it would be. It was virtually identical to the original.

Produits connexes

hot
Norme américaine M913302-0070A, marron
2.9/5

€ 22.45

Norme américaine M913302-0070A, marron
2.9/5

€ 22.45

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array