Enbrighten 55256 Prise intelligente Z-Wave Plus, fonctionne avec Alexa, Google Assistant, inviolable, 1 concentrateur de sortie ZWave 1 Always On requis, blanc

Name: Enbrighten 55256 Prise intelligente Z-Wave Plus, fonctionne avec Alexa, Google Assistant, inviolable, 1 concentrateur de sortie ZWave 1 Always On requis, blanc
Brand: Enbrighten
SKU: 0030878552561
Price: 77.20 EUR
Availability: InStock

Brand:Enbrighten

3.5/5

€
77.20

La vie est automatique avec la prise murale intelligente inviolable Enbrighten Z-Wave Plus. Lorsqu'elle est associée à un concentrateur compatible, la prise intelligente contrôle et programme les appareils enfichables via des commandes marche/arrêt et des paramètres programmés. Faites fonctionner sans fil les lampes, les ventilateurs, les petits appareils électroménagers et plus encore pour une gestion sans effort de votre maison. Vos possibilités d'automatisation sont apparemment infinies lorsqu'elles sont connectées aux hubs de Wink, SmartThings, HomeSeer, Vera, Nexia et plus encore.

Aucune unité disponible

EAN: 0030878552561

Catégories Outils et amélioration de la maison, Électricité, Ruptures, Interrupteurs de prise de courant,

FONCTIONNEMENT SANS TRACAS - Contrôlez la prise Z-Wave à distance avec votre smartphone et les commandes vocales lorsqu'il est connecté à un concentrateur compatible ou profitez d'un fonctionnement marche/arrêt manuel à partir de l'appareil intelligent. Avec un 150 pieds. Gamme Z-Wave, la domotique est simple grâce à des scènes personnalisées, une programmation polyvalente et des alertes pratiques. INSTALLATION ET UTILISATION - Une installation murale avec des connexions câblées, y compris un fil neutre, est requise. La prise double s'adapte aux plaques murales à bascule - non incluses - et fonctionne avec tous les types de sources lumineuses ainsi qu'avec d'autres appareils. INVIOLABLE - Pour une sécurité accrue, les prises inviolables empêchent les objets étrangers d'être insérés dans n'importe quelle fente individuellement. L'appareil intelligent est idéal pour les maisons avec des animaux domestiques ou de jeunes enfants et protège contre les blessures courantes associées aux prises électriques. OPTIONS DE SORTIE - Utilisez une prise contrôlée Z-Wave mise à la terre pour programmer et faire fonctionner sans fil une lampe ou un petit appareil de n'importe où et à tout moment avec un appareil mobile. La prise toujours allumée fournit une alimentation continue pour une utilisation traditionnelle. COMMANDE VOCALE - COMPATIBLE AVEC ALEXA & GOOGLE ASSISTANT (nécessite un hub certifié Z-Wave). Fonctionne avec les hubs certifiés Z-Wave suivants : SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Vera et plus encore.

Brand	Enbrighten
Color	White
Compatible Devices	All
Country of Origin	China
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	1.75 x 2.1 x 4.2 inches
Item model number	55256
Manufacturer	Jasco Products Company, LLC
Material	Plastic
Product Dimensions	1.75 x 2.1 x 4.2 inches; 5.6 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Jim

Unreliable push-in wiring

Works as advertised, aesthetics are good, easy to add to the mesh. The only problem with this is that it doesn't have back-wiring, it's the push-in wiring type that doesn't securely hold the wires. Residential grade.

Scritto da: Fred E. Elum

Less is More

This review is for the Z-Wave Plus in-wall outlet only. Other Jasco/GE product perform differently. Gotta hand it to Jasco (formerly GE, formerly Edison General Electric) less really is more. It has 1 programmable parameter to change the way the indicator LED works (On-On, On-Off, Always Off). It has clamp style terminals (hot, neutral, ground) that will hold 2 wires each (12 awg solid tested). Top outlet is always on; bottom is z-wave controlled. Button in the middle with a blue LED behind it sends program signal and changes state On-Off. Press 10 times quickly and it changes the way the LED works. It has a factory reset with that button as well. This is about as simple as a z-wave device can get. The Jasco products are simple by comparison to other z-wave devices I own, but you don't have to learn Machine Language to figure out how to program and use them (like I did trying to get devices (Aeotec) to work with HomeSeer that said I was too stupid to use their products). The instructions are a little lacking as to explaining how to wire the outlet. It took searching on the multi-language instruction sheet for me to determine how to get it to respond to the add node (hardware). A simple put controller in Add Node-Device-Hardware mode and press button once would have sufficed. Less is More did not help on this point. It is terribly expensive for what you get. Other wireless protocol outlets are much less expensive. Given a typical TR Decora outlet costs 2 dollars (or less) and it will likely die in about 2-3 years from failure of the electrolytic capacitors it is pretty pricey. But, professional automation is tremendously costly (you have to pay them to come out and fix anything or add any programming); so go with what you feel works best. You could use a relay that fits in the box, but those are limited to 10A or less. Be careful.... Make sure you know how to wire that outlet correctly when (notice I didn't say if) your computer controlled automation fails so you get back that other outlet. Make sure you have good surge protection or kiss it goodbye.... Overall, so far works as advertised. Stupid simple to add to Domoticz (v4.970). Works fine with a 1.2w LED lamp. Will update if it dies sooner than expected or causes my network to go nuts. Update Jul 2020: The Outlet has stopped working once or twice since installed. It appeared to lose communication with the controller. I Turned it On and Off with the front mounted switch and it resumed working as normal within a few minutes. This could be the nature of Z-Wave, device error, controller error, or control program error. If it happens to you there is an option to explore.

Scritto da: Amazoner Stallion

Easy to install and works well

I replaced an older Smarthome technology with this unit. It has the added benefit that off means off. I've had issues with some smart on/off modules where they leak current when ostensibly off. That's a real problem if the load is an LED light as they will glow at a low level. In a bedroom that's no bueno as it disturbs my sleep. This unit is fast and when off leaks no power. Very happy!

Scritto da: Jim in Mountain View

Good Zwave outlet, white ONLY

Bought this because in the Q&As and in reviews customers said the face plate could be swapped with almond color. However this out does not have an interchangeable faceplate… it’s white ONLY. Mea culpa… don’t trust reviewer with product facts. :) otherwise it installed quickly and paired easily.

Scritto da: FL

Install was easy. Pairing with Wink Hub would have been easier if Outlet & Hub were closer together

I installed the outlet and it worked. Top outlet worked as always-on. Lower outlet worked with manual button push. When I tried to pair the outlet with Wink Hub using Inclusion mode approach (see other reviews for specific steps), they could not connect. I finally figured out that they too far apart. So I moved the hub to be about 35 feet away from the outlet and the pairing worked. Originally, my Wink hub was in the upstairs network closet (front of house) and the outlet was downstairs near back of house. I was able to move the hub closer because I already have a wifi-extender with a network port on it downstairs. The Wink Hub requires a network cable connection. Now everything works perfectly i.e. scheduled automated on-offs, manual on-offs from iPhone Wink app.

Scritto da: MW

Takes some figuring out to add to Wink

Update: Contacted Wink Support - to get this to work with your Wink hub, you have to go into your Hub in the app, Hit the gear for settings, tap your hub, click on Z-Wave, then click on "Inclusion Mode". Wait for your hub to blink blue, then click once on the button on the outlet, and your hub light should go green. THEN it is connected in your Wink Hub. Why this is so hard/buried is beyond me. Giving 4 stars because that is a ridiculous way to have to add it, when dozens of other outlet/switches/lights are supported on a much less frustrating way. Original Post (was 1 star): Does NOT work with Wink Hub 2 despite claiming that on the box and on this product page. My Wink Hub 2 is fully up to date, I even chose to scan the barcode to try and add it to my hub that way but I got an error saying it is not supported. If you have a Wink Hub do NOT get this. Now I have to take it back out and return it and try and find another one that does work with Wink.

Scritto da: Kindle Customer

Worked well for a while

The media could not be loaded. This is a review for the in-wall zwave outlet. I have purchased about 20 GE / jasco outlets switches etc for my house. The specific outlet in the video is one that I purchased about three and a half years ago. As you can see it is randomly flicking on and off- from what I can tell based on online data, a capacitor has failed and now it just clicks on and off constantly. I've already had the same thing happen with one switch, and I am going to be very surprised if I go the year without having another one go out. Given that these are in-wall installs, this could give very expensive if you're having to pay an electrician. I would strongly not recommend these based on the reliability issues I have seen already. A 10% failure rate in less than 4 years is not great. I am not yet 100% sure if it is just bad capacitors, bad design, or bad luck. I will update my review once I replace the capacitors in the broken devices and see if that fixes things. It was very handy to set up automated lamp on and off for bedtime routines, things of that nature. But given how quickly it broke I would not recommend it.