Extreme Max 3006.6631.4 Taquet pliant en acier inoxydable - 4-1/2", Value 4-Pack

Brand:Extreme Max

3.6/5

€
110.42

Le taquet pliant en acier inoxydable est conçu pour le montage sur le pont des bateaux et s'adapte à la plupart des applications, même pour les emplacements de plat-bord avec une profondeur trop faible pour les taquets "pop-up" standard. Construite en acier inoxydable 316, la tête de taquet de 4-1/2" se replie au ras de la base pour une hauteur d'encastrement hors du chemin de seulement 1/2". Lorsqu'il est étendu, le taquet se trouve à une hauteur de 1-1/2" et offre une résistance supérieure. Ce taquet de style correspond en usine aux taquets pliants que l'on trouve sur de nombreux bateaux OEM. Longueur totale du corps : 4-9/16", largeur totale du corps : 1-9/16". Convient aux cordes de 1/2" de diamètre ou moins, tout le matériel de montage est inclus.

Montant

Ajouter au panier Acheter maintenant

EAN: 0811368033537

Catégories Sports et plein air, Sports et Fitness, Navigation et voile, Bateaux et équipement, Quincaillerie, Selles et cales,

Convient aux cordes 1/2 ou moins ; Matériel de montage inclus. Espacement des trous de boulon : 3-11/16 (centre à centre). Longueur totale du corps : 4-9/16, largeur totale du corps : 1-9/16. Hauteur surélevée : 1-1/2, hauteur encastrée : 1/2. Tête de taquet pliante en acier inoxydable 4-1/2.

Brand	Extreme Max
Brand	‎Extreme Max
Customer Reviews	4.5 4.5 out of 5 stars 126 ratings 4.5 out of 5 stars
Finish Type	Unfinished
Item Dimensions LxWxH	6 x 6 x 2.5 inches
Item model number	‎3006.6631.4
Item Weight	‎2.32 pounds
Manufacturer	‎Extreme Max
Manufacturer Part Number	‎3006.6631.4
Material	Stainless Steel
Model	‎3006.6631.4
Number of Pieces	4
Product Dimensions	‎6 x 6 x 2.5 inches
Style	4-Pack

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Joseph & Lydia

Nice cleat that would be perfect if the edges were not as sharp as to damage rope

The cleat is a well made product that does the job. I mounted it at the bow of the boat where I also have a trolling motor and so can't have anything that would catch the cables during stow and deploy. This cleat folds down neatly such that there are no edges for the trolling motor cables to catch. My only complaint is that the edges are a bit sharp and they can fray the rope. I used a file and some abrasive paper to round-off the sharp edges. It would have been nice had the manufacturer spent an extra minute rounding-off the edges.

Scritto da: KLE

Almost perfect!

Could have been a 5-Star review, but removed one star because I think the sharp edges *may* be hard on the dock ropes. I’m already seeing signs of compromise after only a few weeks mooring (granted, in windy conditions). But the look, size, weight, and ability to lay flush when not in use is flawless! I still highly recommend, but you may have to upgrade your ropes.

Scritto da: charles lozano

Great Cleat

My new boat came with cleats on each side for bumpers. I needed some in front for the dock rope. These are a perfect match. Folding cleats what a great ideal. The hardware they came with is useless for me since I can't access the back. I will have to use stainless PK screws. Should be plenty strong for mooring my 20' boat to the dock. UPDATE had them on my boat for a while now. These thing are working great. Using them in saltwater, no corrosion. They look great and you can step on them if you have to.

Scritto da: Jerry W.

Helpful

These cleets work very well at the dock and fold away when not needed.

Scritto da: SeanDiggity

Not impressed, they’re not worth the price.

I just got these today and I’m not impressed. The hardware they send with them is inadequate for most applications. The plastic plates that are included aren’t big enough, they don’t cover the entire bottom surface of the cleat. This leaves a bit of a gap around the sides of the cleat. Fishing line could easily get caught under the lip and snap. One of the photos they have posted shows the cleat installed with the plastic plate under it. If you look closely at the photo you’ll notice the gap I’m referring to. Another problem, nothing keeps these cleats snapped open and they rattle a little in the open position. I don’t like the little piece of metal that holds the cleat to the base. It’s not a very thick piece of metal, I don’t think it’ll last. I’d give this product 3 stars if it wasn’t so expensive. They cost as much as most of the ones I’ve seen on amazon but this brand surely isn’t worth the cost.

Scritto da: John

well made cleat, stays closed and is easy to install - might need to purchase screws if you can't access under the boat rail

nice cleat for my bass boat. easy to install - however I needed to get screws as this cleat ships with nut & bolts which is only useful if you have access to underneath the rail. Well made. Haven't used them yet but don't expect any issues.

Scritto da: James Worley

Looks good

Looks good ????. Will see if they hold up and resist rust.

Scritto da: JPV

Very compact and functional when I mounted it on my ...

Very compact and functional when I mounted it on my pool's screen enclosure for attaching a bungee cord so my wife could be held back in the pool for "swimming in place." I purchased longer stainless steel bolts than those supplied so that they would go all the way through the aluminum structure of the screen enclosure.

Scritto da: Mike

Quality control could be better

As another reviewer mentioned some edges where ropes would contact are sharp and would cut the rope in no time. I ordered four of these and three had sharp edges . Not really a big deal as I took a dremel tool as smoothed out the sharp edges and good to go. The fasteners that are supplied had some damage to the threads at the ends of the bolts which didn't matter because I needed to cut them down anyway . Could have been easliy fixed with a file if I needed to . Should be better quality for the price which is why I gave four stars not five . I would buy them again

Scritto da: Danielle Quirion

Parfait

Ajouter à mon bateau, le résultat est surprenant, il s’agence très bien aux autres taquets que j’ai et en plus il est pliable. Je le recommande.

Scritto da: Craig Ciastko

Sturdy

Worked great

Scritto da: Ray Bodnar

Good quality tie-up for the boat

All stainless steel and good quality. Flips down out of the way when not required.

Scritto da: Danick Thibault

Pourquoi s’en passer

Très facile d’installation et fonctionne très bien