Freeman FS9G2 Agrafes de clôture collées à 2 colles de calibre 9 (1000 pièces) - Résistantes à la corrosion et à la rouille

Name: Freeman FS9G2 Agrafes de clôture collées à 2 colles de calibre 9 (1000 pièces) - Résistantes à la corrosion et à la rouille
Brand: Freeman
SKU: 0816376014042
Price: 182.34 EUR
Availability: InStock

Brand:Freeman

3.5/5

€
182.34

Les agrafes de clôture Freeman FS9G2 9-Gauge 2 Glue Collated (1000 unités) sont idéales pour les clôtures de bétail, les clôtures à mailles lourdes, les clôtures à maillons de chaîne et l'installation de fils de terre en cuivre pour poteaux électriques. La construction en acier solide assure une puissance de maintien maximale pour les applications les plus difficiles, et un revêtement galvanisé à chaud de classe 3 empêche la rouille et la corrosion. Ces agrafes sont le summum de la qualité et de la valeur, et sont compatibles avec la plupart des agrafeuses de clôture capables de tirer des agrafes de clôture collées à la colle de calibre 9, telles que les Freeman G2FS9 et PFS9, Stockade ST-400, Powermate FS2P et Iron Horse IH-FS. -1 (non compatible avec les agrafeuses de clôture DeWalt). Chaque boîte comprend 1 000 agrafes pour vous assurer d'avoir beaucoup d'attaches à portée de main pendant le travail.

Montant

Ajouter au panier Acheter maintenant

EAN: 0816376014042

Catégories Industriel et scientifique, Nœuds, Vis et attaches, Agrafes, Agrafes pour clôtures en fil de fer,

1 000 comptes. Assemblage de colle. Acier galvanisé pour plus de solidité et de durabilité. Compatible avec la plupart des agrafeuses de clôture de calibre 9 capables de tirer 2 agrafes de clôture collées, telles que les Freeman G2FS9 et PFS9, Stockade ST-400, Powermate FS2P et Iron Horse IH-FS-1 (non compatible avec les agrafeuses de clôture DeWalt). Idéal pour les applications en treillis et tissées telles que les clôtures pour le bétail, les clôtures de terrain, les clôtures pour chevaux, les clôtures à mailles lourdes, les clôtures de prévention des cerfs, les clôtures à maillons de chaîne et l'installation de fils de terre en cuivre pour poteaux électriques.

Brand	Freeman
Country of Origin	China
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	4 x 0.75 x 2 inches
Item model number	FS9G2
Item Weight	0.5 Pounds
Manufacturer	Prime Global Products
Number of Pieces	1000
Product Dimensions	4 x 0.75 x 2 inches; 8 Ounces
Size	9 Gauge 2"

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Tyrone parent

Does the job

The staples seem of decent quality, not great , but decent. The problem is the box just completely falls apart once you open it , so it sucks to use to store the staples in. The glue that holds the strips together is basically wax. If you bounce or drop the box you’ll have a box full of broken strips and loose staples.

Scritto da: Harrison

They nailed it. No Stapled it.

Big and deep.

Scritto da: Steve Laube

Great Staples - Poor Shipping Box

The staples are great, the way in which the box of staples is shipped is horrible. The box of staples was placed in a very large box with no protection. Needless to say, the box of staples was busted open and staples scattered everywhere. I will still use them, but what a pain. Not sure who packages the staples for shipping but this needs to be corrected.

Scritto da: Dillon-MT

Decent Staples

Ordered these for my Freeman PFS9 fence stapler. I store the collated staples in a small plastic ammo can to keep them clean, dry and from coming apart. The GOOD - The Freeman 2 inch staples are about 50% less than the cost of the Stock-ade 2 inch staples. The box and staples arrived in good condition. None of the sticks of staples were broken apart. Both the Freeman and Stock-ade 9 gauge staples that I have have the same shape. The Freeman and Stock-ade 2 inch 9 gauge staples are basically the same lenght. The Freeman might be 1/32 inch shorter. These should work in the 9 gauge Stock-ade ST-400, Freeman PFS9, Powermate VX FS2P and Iron Horse 90429 staplers. The BAD - The Freeman staples are described above as having " a barbed, divergent tip", whatever that is. The box as states these are "Barbed Fencing Staples." The Freeman divergent tips have a slight notch on one side and a matching slight bulge on the other side, probably from the cutting operation. The box I received did not have barbed shanks or legs. The Stock-ade staples have divergent tips with a barb on each shank or leg. OTHER - The Freeman are glue collated and the Stock-ade are tape collated.

Scritto da: spudpuppy

These are great staples for my pneumatic stapler.

These staples go into wood posts without bending or jamming. You can't ask for more than that.

Scritto da: Glenn F.

Staples. To staple stuff.

These are big and powerful. Do not use to keep two pieces of paper together. Way overkill for that. I used on a fence and they worked great. I also shot my friend in the thigh and it did major tissue and nerve damage so try not to do that. It was funny as hell though.

Scritto da: Glen Brown

It is what it is

These staples came in with the box roughed up and quite a few loose staples. They do work good and I bought them to make sure it was compatible with my Nailer. They say barbed but they didn't look like a typical barbed staple like I was expecting. (but I'm used to hammer driven barbed staples) They do work well and I did load the loose ones in between the full ones.

Scritto da: Dave H.

Works well with Freeman PFS 9 Air Stapler

Ran about 1200 ft of No Climb fence this past weekend and the Freeman PFS 9 and the staples all worked well and saved a lot of hand nailing. Will definitely stay with this brand of staples. Used almost a full box of 1000 staples. Glad I bought two boxes.

Scritto da: Dean D.

Heavy duty

Heavy duty staple. Don't go with the 10.5 gauge.