Genie SilentMax 1200 Modèle 4042-TKH Ouvre-porte de garage avec éclairage de détection de mouvement, entraînement par courroie renforcée en acier ultra silencieux, moteur 140 V CC, entraînement par courroie 3/4 + HPc 140 V, gris

Brand:Genie

3.6/5

570.27

L'ouvre-porte de garage Genie SilentMax 1200 est l'option parfaite si votre garage est attenant à votre maison. Ce modèle est livré avec un moteur 140 V CC plus léger et offrant un fonctionnement ultra-silencieux et fluide, de sorte que votre famille ne sera pas dérangée par un ouvre-porte de garage bruyant. La fonction de démarrage et d'arrêt en douceur du moteur offre un déplacement en douceur de la porte de garage, une amélioration par rapport aux moteurs à courant alternatif. Il est assez puissant pour presque toutes les portes de garage résidentielles, jusqu'à 7 pieds de hauteur (ou 8 pieds avec un kit d'extension vendu séparément). Le SilentMax offre des vitesses d'ouverture accrues, jusqu'à 9 pouces par seconde, tout en conservant des fonctions de sécurité pour votre tranquillité d'esprit. Le système Safe-T-Beam aide à prévenir les accidents via un faisceau infrarouge invisible à travers l'ouverture de la porte, qui inverse la porte si un objet traverse le faisceau de lumière LED. Les faisceaux sont améliorés avec une technologie de diagnostic pour vous alerter en cas de dysfonctionnement. Même le système d'éclairage du SilentMax est orienté vers votre sécurité : le système d'éclairage lumineux à 2 ampoules a de la place pour 2 ampoules de 100 watts (non incluses) et une conception innovante de la tête d'alimentation qui place l'éclairage vers l'arrière du garage où vous avez besoin. le plus. Le SilentMax dispose également d'un détecteur de mouvement intégré qui allume automatiquement les plafonniers pour plus de commodité et de sécurité ! Équipé de la technologie Intellicode Security, le SilentMax 1200 offre une sécurité supplémentaire en empêchant l'accès non autorisé à votre garage. Intellicode est une technologie de code tournant qui change automatiquement le code d'accès à chaque activation de porte. L'ouvre-porte est rapide et facile à installer, avec un rail profilé en C renforcé de qualité supérieure qui présente un design épuré pour aider à protéger contre l'accumulation de saleté et de débris. La capacité de montage encastré permet des applications à faible hauteur libre et ne nécessite aucun matériel supplémentaire pour l'assemblage. Le Genie SilentMax 1200 est livré avec une garantie à vie limitée sur le moteur et la boîte de vitesses, et les accessoires comprennent deux télécommandes préprogrammées à 3 boutons, un clavier sans clé sans fil et une console murale multifonction (panneau de commande) avec verrouillage de vacances et bouton de contrôle de la lumière. La programmation SmartSet de Genie rend la configuration de l'ouvre-porte rapide et facile, d'une simple pression sur un bouton. En raison du projet de loi n° 969 du Sénat de Californie, à compter du 1er juillet 2019, tous les ouvre-portes de garage vendus ou installés dans n'importe quelle résidence en Californie doivent être équipés d'un système de batterie de secours. Veuillez rechercher la batterie de secours Genie pour en trouver une qui est conforme à cette loi.

Sûr et sécurisé : le système d'autodiagnostic Safe-T-Beam aide à prévenir les accidents et la technologie Intellicode Security aide à empêcher les accès non autorisés. DURABLE ET FIABLE : Le système d'entraînement par courroie renforcé d'acier ajoute de la résistance, de la durabilité et de la valeur au SilentMax 1200. INSTALLATION RAPIDE ET FACILE : Aucun matériel supplémentaire n'est requis pour l'assemblage, le rail en C permet une installation plus rapide et plus facile. FONCTIONNEMENT PUISSANT ET LISSE : Le puissant moteur 140 V CC est doté d'une commande de démarrage et d'arrêt en douceur pour un déplacement en douceur de la porte. FONCTIONNEMENT ULTRA-SILENCIEUX : Le SilentMax 1200 est un ouvre-porte de garage idéal pour les garages attachés aux espaces de vie.
Batteries ‎2 Lithium Metal batteries required.
Batteries Included? ‎Yes
Batteries Required? ‎No
Battery Cell Type ‎Lithium Manganese Dioxide
Color ‎Gray
Country of Origin ‎Mexico
Coverage ‎Works up to 7ft high residential garage doors
Customer Reviews 4.5 4.5 out of 5 stars 455 ratings 4.5 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Horsepower ‎1
Included Components ‎Includes 140 volt belt drive garage door opener for 7 foot high doors, 2 3-button preprogrammed garage door opener remotes, wireless keyless keypad, wall control with light button and vacation lock, safety sensors, hardware, batteries, detailed installation instructions and owners manual
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎4042-TKH
Item Package Quantity ‎1
Item Weight ‎30.6 pounds
Manufacturer ‎Genie
Mounting Type ‎Door Mount
Part Number ‎37281V
Pattern ‎Door Opener
Product Dimensions ‎39.8 x 11.75 x 9.5 inches
Size ‎3/4 + HPc 140V Belt Drive
Style ‎SilentMax 1200
Voltage ‎120 Volts
Warranty Description ‎Limited Lifetime

3.6

13 Review
5 Star
75
4 Star
15
3 Star
2
2 Star
1
1 Star
6

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Brian Marko
Very quiet. Happy overall.
After install was completed, I have no complains. It works well and is surprisingly quiet. Runs very smooth. The only issue was that the rail wasn't assembled in the way the directions assumed it was. We had to piece it together using the vague pictures to get it to the point where we could start at step 1. After that it was easy install.
Scritto da: Nicole Bailey
Great
Easy installation, quiet motor, no issues!
Scritto da: Steve Procell
Easiest install ever.
Purchased this unit to replace an existing unit that had ran its course. This product comes with a color coded map of instillation. Unit is extremely easy to install. Furthermore, to say it is quiet is an understatement, all you can hear is the wheels/casters of the garage door. Great product, motor is strong. This product was definitely an upgrade for my home.
Scritto da: Neal Freeman
Good instructions, just use assembly poster.
Replaced a model 1000 chaindrive that was destroyed in power outage. Used this model 1200 and added surge protector. For me it was as simple as assembling head unit and track, then 1 pin and 2 bolts, replace wall switch, done. Quiet, motion light works great. Good value.
Scritto da: Amazon Customer
The absolutely quietest unit, ever.!
This was a newer replacement for a similar model the failed during a lightning-storm, plus 10 or more years or service. It is the absolutely quietest opener I have ever experienced. Belt drive is the best.
Scritto da: Candoo
Great Product!
I purchased two of these. Everything you need (except tools) to install is in the box. Instruction are well done. This model is the best Genie product that I have installed to date.
Scritto da: Tim Thomas
Directly replaces the 1000 model 4032
I'm a Certified Electronics Technician and was in the Access Control industry for my last job before retiring. On a new install / NO Opener installed before: Install each photo sensor PER Instructions. Don't like the wire hardware so I used a roll of 3-M ALUMINUM AC Duct tape. TAPE each wire with a 1 inch square of tape to wall/wood every 12-18 inches. Then to the header ABOVE where the garage door closes. Bring both wires to the center and use tie wraps and tape at the center. Let wire hang until opener is installed. Pre-assemble everything on a table or the floor. Leave the WHITE piece of foam to cover the motion sensor until ready to install. Place a hand towel on the ground to protect the operator cabinet. Put the whole unit together per instructions. 6ft ladder needed. WITH garage door closed, place ladder under where the Head Unit will connect to suspension straps. NOW lift entire unit placing the metal end onto the top of DOOR and the Controller on top of the ladder. For my install I skipped 2 strap holes and attached the controller in the third hole. This placed the bar, when LEVELLED about 1 1/2 inches above Springs. Raise up the bar and using a level mark both holes and pre-drill the 2 holes with a bit just a little smaller than the inside diameter of the shaft threads. That wood is pressure treated OAK and is hard. That cotter pin has failed twice so I bent a nail the third time. Run the wires ABOVE and BEHIND the spring bar and using the tape attach the wires to the RIGHT side facing out. Tape every 8-12 inches. Wires drop through a feed-through hole on top. Do the same for the pushbutton wire. Make connections per Instructions. Tie Wrap extra wire above opener. Connect Opener Arm assembly. Apply Power. Set Stops FIRST. Open and Close using wall keypad TWICE. Both remotes supplied already programmed and can add more. We have 5. Program Exterior keypad. All Done. Replacing the Silentmax 1000: If Belt OK: Remove Power, replace Interior wall Pushbutton. NOTE: When Lowering Unit remove cotter pin on opener arm attached to door, and may need to give slack for sensor wires. Using 6 foot ladder remove 2 strap bolts. remove 4 hex screws on top. Remove Entire Controller. Attach NEW Control Head. Program Stops and Exterior wall remote. DONE.
Scritto da: JP
Quiet and fast
After my old Genie screw type garage door opener failed after 10 years I decided to replace it with another Genie product. Even with the mixed reviews here I decided to purchase the Genie SilentMax 1200. After reviewing the enclosed instructions and measuring my garage door, 7' tall, I found that I did NOT need to purchase the extension kit. However one of the two garage door opener fobs was missing from the packaging. I placed a call to the supplied Genie support number on a Saturday morning and was able to have a replacement fob mailed to me in just a few minutes. I'm not sure when other reviewers have called Genie's support number but I did not have to wait in a calling queue and the support assistant was polite and friendly. Installation was simple and the directions were concise and easy to follow. The enclosed installation poster has a color coded bag displayed next to each step that holds the required bolts/nuts, if fasteners are required for that step, so don't dump them out into one big pile! I was able to remove my old unit and install the new unit in just over 2 hours. HINT: If you are replacing an existing garage door opener make sure that you flag the wiring to mark which component it runs too before removing it. The prior owner of my home did not save the instructions of the old unit so I had to trace the lines (in my case the lines were piecemeal telephone lines with segments of solid two wire lines combined) to their appropriate components. Although the installation instructions state that one or two of the steps require two people I was able to do it by myself with the help of two ladders (so if you are not handy then don't try those steps alone). I spent another hour setting up the garage door control panel, the safety-beam devices, the key fobs and the wireless entry; to be fair much of this last hour was spent fixing the prior wiring that I inherited with the house. The unit opens/closes my garage door quickly and quietly. The only sounds I hear when opening/closing the garage door are the sound of the garage door creaking and the belt running. It is much faster than the old unit it replaced. The motion sensor light control is a great addition and is very useful when I am carrying something through my garage with my hands full. The new unit does not have the extensive range for fob commands to open/close the door of the unit that it replaced but I have no issues with this. I have found that the fobs work roughly 20 feet away. The only negative I have with the new unit is that the wireless entry device allows you to open/close the garage door for about 30 seconds after entering the code once. I would rather have to enter the code each time but that is a minor issue. Overall the SilentMax 1200 is great and exceed my initial expectations after reading the mixed reviews. It was easy to install and with the faster speed and lack of noise compared to the unit it replaced I would recommend it to anyone.
Scritto da: Mikey
Surprised by how quiet door opener... wiring connections could be better
A little tricky to install. But if you've installed door openers before, you know its gonna take a few hours. Motor was very quiet, much better than I thought. Wiring connections need to be improved, very finicky on the main controller device... Else I would have provided a 5 star.
Scritto da: Jim M
Have the 1800 number handy or the Youtube video loaded.
Love the opener when it finally was finished over a two day period. It work far better than the one next to it that is 5 years old now. The instructions are large but some of the crucial steps are very vague, like the programing up and down travel. They are two separate programs not one. You have to hold the program buttons for at least 20 to 25 seconds before there is movement. The help line is great however they do close at 5pm and no Sundays.
Scritto da: Hans Kurz
The unit works great. A lot quieter than my old one.
it was easy to install but the programming was a little difficult. I phoned the given toll free number and and it was resolved very quickly.
Scritto da: dany desbiens
Parfait
Très bien
Scritto da: jose
No es ruidoso
Bien no ruidos

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array